Weight, CYP3A5 Genotype, and Voriconazole Co-administration Influence Tacrolimus Initial Dosage in Pediatric Lung Transplantation Recipients with Low Hematocrit based on a Simulation Model.

OBJECTIVE: The method of administering the initial doses of tacrolimus in recipients of pediatric lung transplantation, especially in patients with low hematocrit, is not clear. The present study aims to explore whether weight, CYP3A5 genotype, and voriconazole co-administration influence tacrolimus initial dosage in recipients of pediatric lung transplantation with low hematocrit based on safety and efficacy using a simulation model. METHODS: The present study utilized the tacrolimus population pharmacokinetic model, which was employed in lung transplantation recipients with low hematocrit. RESULTS: For pediatric lung transplantation recipients not carrying CYP3A5*1 and without voriconazole, the recommended tacrolimus doses for weights of 10-13, 13-19, 19-22, 22-35, 35-38, and 38-40 kg are 0.03, 0.04, 0.05, 0.06, 0.07, and 0.08 mg/kg/day, which are split into two doses, respectively. For pediatric lung transplantation recipients carrying CYP3A5*1 and without voriconazole, the recommended tacrolimus doses for weights of 10-18, 18-30, and 30-40 kg are 0.06, 0.08, 0.11 mg/kg/day, which are split into two doses, respectively. For pediatric lung transplantation recipients not carrying CYP3A5*1 and with voriconazole, the recommended tacrolimus doses for weights of 10-20 and 20-40 kg are 0.02 and 0.03 mg/kg/day, which are split into two doses, respectively. For pediatric lung transplantation recipients carrying CYP3A5*1 and with voriconazole, the recommended tacrolimus doses for weights of 10-20, 20-33, and 33-40 kg are 0.03, 0.04, and 0.05 mg/kg/day, which are split into two doses, respectively. CONCLUSION: The present study is the first to recommend the initial dosages of tacrolimus in recipients of pediatric lung transplantation with low hematocrit using a simulation model.

Knowledge enhanced bottom-up affordance grounding for robotic interaction.

With the rapid advancement of robotics technology, an increasing number of researchers are exploring the use of natural language as a communication channel between humans and robots. In scenarios where language conditioned manipulation grounding, prevailing methods rely heavily on supervised multimodal deep learning. In this paradigm, robots assimilate knowledge from both language instructions and visual input. However, these approaches lack external knowledge for comprehending natural language instructions and are hindered by the substantial demand for a large amount of paired data, where vision and language are usually linked through manual annotation for the creation of realistic datasets. To address the above problems, we propose the knowledge enhanced bottom-up affordance grounding network (KBAG-Net), which enhances natural language understanding through external knowledge, improving accuracy in object grasping affordance segmentation. In addition, we introduce a semi-automatic data generation method aimed at facilitating the quick establishment of the language following manipulation grounding dataset. The experimental results on two standard dataset demonstrate that our method outperforms existing methods with the external knowledge. Specifically, our method outperforms the two-stage method by 12.98% and 1.22% of mIoU on the two dataset, respectively. For broader community engagement, we will make the semi-automatic data construction method publicly available at https://github.com/wmqu/Automated-Dataset-Construction4LGM.

Developing a High-Umami, Low-Salt Soy Sauce through Accelerated Moromi Fermentation with Corynebacterium and Lactiplantibacillus Strains.

The traditional fermentation process of soy sauce employs a hyperhaline model and has a long fermentation period. A hyperhaline model can improve fermentation speed, but easily leads to the contamination of miscellaneous bacteria and fermentation failure. In this study, after the conventional koji and moromi fermentation, the fermentation broth was pasteurized and diluted, and then inoculated with three selected microorganisms including Corynebacterium glutamicum, Corynebacterium ammoniagenes, and Lactiplantibacillus plantarum for secondary fermentation. During this ten-day fermentation, the pH, free amino acids, organic acids, nucleotide acids, fatty acids, and volatile compounds were analyzed. The fermentation group inoculated with C. glutamicum accumulated the high content of amino acid nitrogen of 0.92 g/100 mL and glutamic acid of 509.4 mg/100 mL. The C. ammoniagenes group and L. plantarum group were rich in nucleotide and organic acid, respectively. The fermentation group inoculated with three microorganisms exhibited the best sensory attributes, showing the potential to develop a suitable fermentation method. The brewing speed of the proposed process in this study was faster than that of the traditional method, and the umami substances could be significantly accumulated in this low-salt fermented model (7% w/v NaCl). This study provides a reference for the low-salt and rapid fermentation of seasoning.

Semi-automatic proximal humeral trabecular bone density assessment tool: technique application and clinical validation.

PURPOSE: This study aimed to apply a newly developed semi-automatic phantom-less QCT (PL-QCT) to measure proximal humerus trabecular bone density based on chest CT and verify its accuracy and precision. METHODS: Subcutaneous fat of the shoulder joint and trapezius muscle were used as calibration references for PL-QCT BMD measurement. A self-developed algorithm based on a convolution map was utilized in PL-QCT for semi-automatic BMD measurements. CT values of ROIs used in PL-QCT measurements were directly used for phantom-based quantitative computed tomography (PB-QCT) BMD assessment. The study included 376 proximal humerus for comparison between PB-QCT and PL-QCT. Two sports medicine doctors measured the proximal humerus with PB-QCT and PL-QCT without knowing each other's results. Among them, 100 proximal humerus were included in the inter-operative and intra-operative BMD measurements for evaluating the repeatability and reproducibility of PL-QCT and PB-QCT. RESULTS: A total of 188 patients with 376 shoulders were involved in this study. The consistency analysis indicated that the average bias between proximal humerus BMDs measured by PB-QCT and PL-QCT was 1.0 mg/cc (agreement range - 9.4 to 11.4; P > 0.05, no significant difference). Regression analysis between PB-QCT and PL-QCT indicated a good correlation (R-square is 0.9723). Short-term repeatability and reproducibility of proximal humerus BMDs measured by PB-QCT (CV: 5.10% and 3.41%) were slightly better than those of PL-QCT (CV: 6.17% and 5.64%). CONCLUSIONS: We evaluated the bone quality of the proximal humeral using chest CT through the semi-automatic PL-QCT system for the first time. Comparison between it and PB-QCT indicated that it could be a reliable shoulder BMD assessment tool with acceptable accuracy and precision. This study developed and verify a semi-automatic PL-QCT for assessment of proximal humeral bone density based on CT to assist in the assessment of proximal humeral osteoporosis and development of individualized treatment plans for shoulders.

Biosafety Risk Control Strategies in Laboratory Animal Research.

To understand biosafety's current situation in laboratory animal research and risk factors affecting occupational health. Compliance surveys were conducted by questionnaire via Questionnaire Star (an application app on the Internet) in Chinese. Thirty-nine anonymous questionnaires were collected. The surveyed institution has established 24 types of ABSL (Animal Biosafety Laboratory) and biosafety management organizations and systems equipped with safety equipment. Our study also suggests that the principal of the laboratory establishment fails to perform supervision and inspection responsibilities, the inappropriate design of the animal biosafety laboratory, non-standardized personnel training and health management, non-strict waste management, and insufficient emergency management. The administrative department and work units should address certain safety and occupational health risks in laboratory animal research. The author proposes control strategies based on organizational guarantee, personnel management, emergency management, etc., to help prevent risks and ensure occupational health. Due to regional limitations and small sample size, the results may not be generalisable to all parts of the world. However, some of the key common issues may also be present in other regions, so we believe that this research still has some relevance.

Statistical power analysis and sample size planning for moderated mediation models.

Conditional process models, including moderated mediation models and mediated moderation models, are widely used in behavioral science research. However, few studies have examined approaches to conduct statistical power analysis for such models and there is also a lack of software packages that provide such power analysis functionalities. In this paper, we introduce new simulation-based methods for power analysis of conditional process models with a focus on moderated mediation models. These simulation-based methods provide intuitive ways for sample-size planning based on regression coefficients in a moderated mediation model as well as selected variance and covariance components. We demonstrate how the methods can be applied to five commonly used moderated mediation models using a simulation study, and we also assess the performance of the methods through the five models. We implement our approaches in the WebPower R package and also in Web apps to ease their application.

Characteristics and Functions of Non-Suicidal Self-Injury That Inform Suicide Risk.

OBJECTIVE: Although non-suicidal self-injury (i.e., NSSI) has been suggested as a robust risk factor of suicide, NSSI related information that is most related to suicide risk remains unclear. Commonly studied NSSI characteristics are its frequency and the number of methods endorsed. However, it may not be merely how frequent or how many different methods that matters, but "why," which alludes to the importance of NSSI functions (or why individuals engage in NSSI). Thus, this study examined how the interactions between NSSI characteristics and functions are associated with suicide risk. METHODS: Undergraduate students (n = 820) with a lifetime history of NSSI, filled out self-report measures on NSSI and suicide risk. A hierarchical regression analysis was conducted to examine the moderation effects between four 2-way interactions (i.e., method X intrapersonal; method X interpersonal; frequency X intrapersonal; frequency X interpersonal) on suicide risk. RESULTS: Main effects of all four independent variables were statistically significant. In terms of interactions, the intrapersonal function moderated both the effects of NSSI frequency and methods on suicide risk, whereas the interpersonal function moderated the effects of NSSI frequency on suicide risk. CONCLUSION: Our results highlight that some NSSI related information than others are more indicative of suicide risk. In particular, the combination of NSSI functions, along with its frequency and number of methods, holds promise when assessing for current and lifetime suicidal thoughts and behaviors.

Development of a Microheater with a Large Heating Area and Low Thermal Stress in the Heating Area.

In this paper, a microheater that can absorb thermal stress and has a large heating area is demonstrated by optimizing the structure and process of the microheater. Four symmetrically distributed elongated support beam structures were machined around the microheater via deep silicon etching. This design efficiently mitigates the deformation of the heated region caused by thermal expansion and enhances the structural stability of the microheater. The updated microheater no longer converts the work area into a thin film; instead, it creates a stable heating platform that can uniformly heat a work area measuring 10 × 10 mm2. The microheater is verified to have high temperature uniformity and structural stability in finite element simulation. Finally, thorough investigations of electrical-thermal-structural characterization were conducted. The test findings show that the new microheater can achieve 350 °C with a power consumption of 6 W and a thermal reaction time of 22 s. A scan of its whole plane reveals that the surface of the working area of the new microheater is flat and does not distort in response to variations in temperature, offering good structural stability.

Enantioselective Cyanofunctionalization of Aromatic Alkenes via Radical Anions.

Alkene radical ions constitute an integral and unique class of reactive intermediates for the synthesis of valuable compounds because they have both unpaired spins and charge. However, relatively few synthetic applications of alkene radical anions have emerged due to a dearth of generally applicable and mild radical anion generation approaches. Precise control over the chemo- and stereoselectivity in alkene radical anion-mediated processes represents another long-standing challenge due to their high reactivity. To overcome these issues, here, we develop a new redox-neutral strategy that seamlessly merges photoredox and copper catalysis to enable the controlled generation of alkene radical anions and their orthogonal enantioselective cyanofunctionalization via distonic-like species. This new strategy enables highly regio-, chemo-, and enantioselective hydrocyanation, deuterocyanation, and cyanocarboxylation of alkenes without stoichiometric reductants or oxidants under visible light irradiation. This protocol provides a new blueprint for the exploration of the transformation potential of alkene radical anions.

Clamparene: Synthesis, Structure, and Its Application in Spontaneous Formation of 3D Porous Crystals.

Macrocyclic arenes have emerged as pivotal scaffolds in supramolecular chemistry. Despite their significant contributions to molecular recognition and diverse applications, challenges persist in the development of macrocyclic arene-based crystalline materials, particularly in achieving porosity and addressing limitations in adsorption efficiency resulting from the small cavity sizes of existing macrocyclic arenes. In this study, we present the design and synthesis of a novel macrocyclic arene, clamparene (CLP), featuring a rigid backbone, easy synthesis, and a sizable cavity. CLP self-assembles into one-dimensional sub-nanotubes that further organize into a three-dimensional porous framework in the solid state. The crystalline solid of CLP exhibits potential as a porous crystalline adsorbent for various benzene-based contaminants with rapid adsorption kinetics, large uptake amounts, and good recyclability.

Single-institution experience of venetoclax combined with azacitidine in newly diagnosed acute myeloid leukemia patients.

To retrospectively analyze the efficacy and safety of venetoclax combined with azacitidine (VEN + AZA) in the treatment of elderly patients with acute myeloid leukemia. The clinical data for 57 AML patients treated with the VEN + AZA regimen from December 2019 to November 2022 in the Department of Hematology, General Hospital of Tianjin Medical University, were collected. Of the 57 patients included in this study, the mean age of onset was 69.89 (±8.88) years. The median follow-up time was 8.57 months, and the median OS time was 11.50 months. The ORR, CR rate, and MRD (<0.1%) negativity rate were 87.5%, 68.8%, and 58.3%, respectively. The median OS was longer in patients who achieved CR/CRi and who were MRD-negative than in those who did not. MRD negativity was less likely to be achieved in patients aged ≥75 years and with ECOG scores of ≥3. Compared to traditional intensive chemotherapy, MRD negative was achieved more quickly with VEN + AZA regimens in patients with newly diagnosed AML. Advanced age and ECOG score were risk factors for negative MRD. The dominant adverse reactions were hematological adverse events. VEN + AZA regimens in elderly unfit patients with previously untreated newly diagnosed AML have sufficient efficacy and safety.

Biosafety Risk Control Strategies in Laboratory Animal Research

To understand biosafety's current situation in laboratory animal research and risk factors affecting occupational health. Compliance surveys were conducted by questionnaire via Questionnaire Star (an application app on the Internet) in Chinese. Thirty-nine anonymous questionnaires were collected. The surveyed institution has established 24 types of ABSL (Animal Biosafety Laboratory) and biosafety management organizations and systems equipped with safety equipment. Our study also suggests that the principal of the laboratory establishment fails to perform supervision and inspection responsibilities, the inappropriate design of the animal biosafety laboratory, non-standardized personnel training and health management, non-strict waste management, and insufficient emergency management. The administrative department and work units should address certain safety and occupational health risks in laboratory animal research. The author proposes control strategies based on organizational guarantee, personnel management, emergency management, etc., to help prevent risks and ensure occupational health. Due to regional limitations and small sample size, the results may not be generalisable to all parts of the world. However, some of the key common issues may also be present in other regions, so we believe that this research still has some relevance.

Study on the toxicity characteristics of a clinical bloodstream isolate of Salmonella Telelkebir / 中国人兽共患病学报

The ICR(Institute of Cancer Research)mouse infection model was constructed to study the pathogenicity of Sal-monella Telelkebir serotype,and the pathogenic identification of mouse isolates was carried out.Observe the bacterial excretion cycle,evaluate the pathogenicity of Salmonella serotype to mice,and calculate the LD50 by the changes in clinical characteris-tics,histopathology and tissue bacterial load of infected mice;by flight mass spectrometry,biochemical identification,serotype identification,molecular typing and other experiments,compared with human isolates;virulence gene analysis was carried out by PCR experiment and whole genome sequencing.The LD50 of Salmonella Telelkebir is 2.67 × 108 CFU/mL;curling and fluffing may occur 0.5 h after infection;autopsy of dead mice showed that the small intestine was severely congested,with more bubbles and fluid accumulation,cecal necrosis,liver apical degeneration and necrosis,necrotic foci on the surface of the kidney and spleen atrophy;the bacterial load of spleen,kidney,lung,liver and jejunum in mice reached its peak at 3 days after infection,while that of heart at 6 days;the bacterial excretion time of the high-dose group exceeded 100 days;The level of CD3 in tissues increased with increasing dose,with inflammatory cell infiltration,myocardial capillary dilation and hyperemia,large area of vacuoles,degeneration and necrosis of hepatocytes,obvious enlargement of splenic sinus,blurred zoning,thickening of glomerular basement membrane,partial exfoliation of ciliated epithelium,atrophy and exfoliation of jejunal villi;PCR and whole genome sequencing revealed Salmonella-related virulence genes such as cdtB,plt A and pltB.This study was the first to successfully establish the ICR mouse model of Salmonella Telelkebir,demonstrating that this serotype of Salmonella has some pathogenicity.

A Two-Step Fluorescence-Resonance Energy Transfer System Constructed by Platinum(II) Metallacycle Based Molecular Recognition.

Considerable progress in the construction of efficient fluorescence-resonance energy transfer (FRET) systems has promoted the development of artificial energy transfer materials. However, despite recent advances, the exploration of efficient and easy strategies to fabricate novel supramolecular systems with FRET activities is still a challenge. Here, we report that a two-step FRET system was successfully achieved, driven by platinum metallacycle based host-guest interactions. The two-step FRET system is used for the preparation of a white-light-emitting diode and serves as a nanoreactor for the photosynthetic process. This work offers a strategy for the fabrication of FRET systems and opens opportunities for functional materials constructed by platinum(II) metallacycle based host-guest interactions.

Extracting Mutant-Affected Protein-Protein Interactions via Gaussian-Enhanced Representation and Contrastive Learning.

Genetic mutations can impact protein-protein interactions (PPIs) in biomedical literature. Automated extraction of PPIs affected by gene mutations from biomedical literature can aid in evaluating the clinical importance of gene variations, which is crucial for the advancement of precision medicine. In this study, a new model called the Gaussian-enhanced representation model (GRM) is introduced for PPI extraction. The model utilizes the Gaussian probability distribution to produce a target entity representation based on the BioBERT pretraining model. The GRM assigns more weight to target protein entities and their adjacent entities, resolving the problem of lengthy input text and scattered distribution of target entities in the PPI extraction task. Additionally, the model introduces a supervised contrast learning approach to enhance its effectiveness and robustness. Experiments on the BioCreative VI data set demonstrate that our proposed GRM model has achieved state-of-the-art performance.

Systemic subchronic toxicity and comparison of four selenium nutritional supplements by 90-day oral exposure in Sprague-Dawley rats.

To evaluate and compare the safety of four selenium supplements, namely Se-enriched peptides (SeP), yeast selenium (SeY), L-Se-methylselenocysteine (L-SeMc) and sodium selenite (Na2SeO3), the subchronic toxicity study was designed by 90-day gavage administration in Sprague-Dawley rats. The doses of SeP, SeY, L-SeMc and Na2SeO3 were 0.15, 0.30 and 0.60 mg/kg bw/day, with additional dose of 0.45 mg/kg L-SeMc (All dose calculated as Se). Symptoms like growling, hair loss and significant weight loss were found at 0.60 mg/kg of L-SeMc, but not in other groups. At the dose of 0.60 mg/kg, females in Na2SeO3, SeY and L-SeMc groups showed significant elevations in ALT and/or ALP. Pathologic manifestations such as bile duct hyperplasia and cholestasis were predominantly found in females at 0.6 mg/kg of L-SeMc and SeY groups, and in males at same dose of L-SeMc group showed marked testicular atrophy. 0.60 mg/kg of SeY and Na2SeO3, and 0.30, 0.45, 0.60 mg/kg of L-SeMc induced significant reductions in sperm motility rates, rapid movement and amount. In conclusion, the NOAEL of SeP, SeY, L-SeMc, Na2SeO3 was all 0.30 mg/kg for female, and 0.60, 0.30, 0.15 and 0.30 mg/kg for male respectively. Liver and reproductive organs are possible toxic target organs of hyper selenium.

Design and Analysis of XY Large Travel Micro Stage Based on Secondary Symmetric Lever Amplification.

This study presents a newly developed piezoelectric drive mechanism for the purpose of designing, analyzing, and testing a micro-positioning platform driven by piezoelectric actuators. The platform incorporates a piezoelectric ceramic actuator and a flexible hinge drive and features a symmetrical two-stage lever (STSL) amplification mechanism and a parallelogram output structure. The implementation of this design has led to notable enhancements in the dynamic properties of the platform, thereby eliminating the undesired parasitic displacement of the mechanism. An analytical model describing the fully elastic deformation of the platform is established, which is further verified by finite element simulation. Finally, the static and dynamic performances of the platform are comprehensively evaluated through experiments. A closed-loop control strategy is adopted to eliminate the nonlinear hysteresis phenomenon of the piezoceramic actuator (PEA). The experimental results show that the piezoelectric micro-actuator platform has a motion range of 97.84 µm × 98.03 µm; the output coupling displacement error is less than 1%; the resolutions of the two axes are 8.1 nm and 8 nm, respectively; and the x-axis and y-axis trajectory tracking errors are both 0.6%. The piezoelectric micromotion platform has good dynamic properties, precision, and stability. The design has a wide application potential in the field of micro-positioning.

Deep-penetration functionalized cuttlefish ink nanoparticles for combating wound infections with synergetic photothermal-immunologic therapy.

The challenge of wound infections post-surgery and open trauma caused by multidrug-resistant bacteria poses a constant threat to clinical treatment. As a promising antimicrobial treatment, photothermal therapy can effectively resolve the problem of drug resistance in conventional antibiotic antimicrobial therapy. Here, we report a deep-penetration functionalized cuttlefish ink nanoparticle (CINP) for photothermal and immunological therapy of wound infections. CINP is decorated with zwitterionic polymer (ZP, namely sulfobetaine methacrylate-methacrylate copolymer) to form CINP@ZP nanoparticles. Natural CINP is found to not only exhibit photothermal destruction of methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli), but also trigger macrophages-related innate immunity and enhance their antibacterial functions. The ZP coating on the surface of CINP enables nanoparticles to penetrate into deeply infected wound environment. In addition, CINP@ZP is further integrated into the thermosensitive Pluronic F127 gel (CINP@ZP-F127). After in situ spraying gel, CINP@ZP-F127 is also documented notable antibacterial effects in mice wound models infected with MRSA and E. coli. Collectively, this approach combining of photothermal therapy with immunotherapy can promote delivery efficiency of nanoparticles to the deep foci of infective wounds, and effectively eliminate wound infections.

A novel PEGylated form of granulocyte colony-stimulating factor, mecapegfilgrastim, for peripheral blood stem cell mobilization in patients with hematologic malignancies.

BACKGROUND: The Pegylated recombinant human granulocyte colony stimulating factor (PEG-rhG-CSF) has longer half-life and is given once only, which is more comfortable for patients. We aimed to evaluate the efficacy of mecapegfilgrastim for hematopoietic stem cell (HSC) mobilization in patients with hematologic malignancies and to explore the potential factors related to HSC mobilization. METHODS: A retrospective analysis was performed on patients who underwent HSC mobilization in the hematology department of Mianyang Central Hospital from April 2016 to November 2022. The number of CD34 + cells collected was compared between the patients receiving mecapegfilgrastim (PEG group) and those receiving recombinant human granulocyte colony-stimulating factor (rhG-CSF group), and the possible factors for mobilization failure were analyzed. RESULTS: The success rates of collecting CD34 + cells in the PEG group and rhG-CSF group were 80.6% and 67.7%, respectively (χ = 1.444, P = 0.229). The median CD34 + cell counts were 3.62 × 10^6/kg and 2.92 × 10^6/kg (P = 0.178), respectively. After combination with plerixafor for mobilization, the median number of CD34 + cells collected in the PEG group and rhG-CSF group were 3.64 × 10^6/kg and 3.92 × 10^6/kg, respectively, with no significant difference (P = 0.754). There was no significant difference in hematopoietic cell recovery or infection between the groups (P > 0.05). Multivariate analysis showed that more than 5 cycles of chemotherapy (OR = 15.897, 95% CI: 1.766-143.127, P = 0.014), a precollection WBC count < 32 × 10^9/L (OR = 14.441, 95% CI: 2.180-95.657, P = 0.006) and a precollection to premobilization lymphocyte ratio < 1.7 (OR = 11.388, 95% CI: 2.129-60.915, P = 0.004) were independent risk factors for HSC mobilization failure. CONCLUSIONS: The HSC mobilization efficacy of mecapegfilgrastim in patients with hematologic malignancies was comparable to that of rhG-CSF, and combination with plerixafor for mobilization was feasible and effective. Patients with more than 5 cycles of chemotherapy before HSC mobilization, a precollection WBC count lower than 32 × 10^9/L, and a precollection lymphocyte count less than 1.7 times the premobilization lymphocyte count have a high probability of HSC mobilization failure.