Evaluation of a novel composite of expanded polystyrene with rGO and SEBS-g-MA.

This study displays the effect of reduced graphene oxide (rGO) nanofiller and polystyrene-b-poly(ethylene-ran-butylene)-b-polystyrene-grafted maleic anhydride (SEBS-g-MA) on the optical, thermal, and mechanical features of expanded polystyrene (EPS). First, the thin films of pristine EPS and composites were prepared using solution cast method. The prepared films were subjected to fourier-transform infrared (FTIR), SEM, UV-visible spectrophotometer, thermogravimetric analysis/differential scanning calorimetry, and universal testing machine for structural, morphological, optical, thermal, and mechanical characterizations. Optical study revealed a significant increase in refractive index and absorption of composites than EPS. Indirect band-gap energy of EPS (~4.08 eV) was reduced to ~1.61 eV for rGO composite and ~ 2.23 eV for composite composed of rGO and SEBS-g-MA. Thermal analyses presented improvement in characterization temperatures such as T10, T50, Tp, Tm, and Tg of composites, which ultimately lead to the thermal stability of prepared composites than pristine EPS. Stress-strain curves displayed higher yield strength (46.62 MPa), Young's modulus (96.29 MPa), and strain at break (0.54%) for EPS+rGO composite than pure EPS having stress at break (1.01 MPa), Young's modulus (12.44 MPa), and strain at break (0.08%). Moreover, ductility with relatively higher strain at break (0.61%) and lower Young's modulus (79.32 MPa) and yield strength (32.98 MPa) was noticed in EPS+rGO+SEBS-g-MA composite than EPS+rGO composite film. Morphological analysis revealed a change in globular morphology of EPS and inhomogeneous dispersion of rGO in EPS to homogeneously dispersed rGO in EPS matrix without globules owing to the addition of SEBS-g-MA. The increase in compatibility of EPS and rGO due to SEBS-g-MA was also observed in FTIR spectra. RESEARCH HIGHLIGHTS: Here, the solution casting approach was used to create the composite film of EPS and rGO with globules of various sizes. After adding SEBS-g-MA, the shape altered to globular free films exhibiting homogenous dispersion of rGO in EPS matrix. An optical investigation showed that composite materials had a significantly higher refractive index and absorption than EPS. The optical, thermal, and mechanical investigations suggest that the produced composites may be a great substitute for virgin EPS, allowing for a wider range of applications.

Improving the efficiency of dye-sensitized solar cells based on rare-earth metal modified bismuth ferrites.

This study reports light energy harvesting characteristics of bismuth ferrite (BiFeO3) and BiFO3 doped with rare-earth metals such as neodymium (Nd), praseodymium (Pr), and gadolinium (Gd) dye solutions that were prepared by using the co-precipitation method. The structural, morphological, and optical properties of synthesized materials were studied, confirming that 5-50 nm sized synthesized particles have a well-developed and non-uniform grain size due to their amorphous nature. Moreover, the peaks of photoelectron emission for bare and doped BiFeO3 were observed in the visible region at around 490 nm, while the emission intensity of bare BiFeO3 was noticed to be lower than that of doped materials. Photoanodes were prepared with the paste of the synthesized sample and then assembled to make a solar cell. The natural and synthetic dye solutions of Mentha, Actinidia deliciosa, and green malachite, respectively, were prepared in which the photoanodes were immersed to analyze the photoconversion efficiency of the assembled dye-synthesized solar cells. The power conversion efficiency of fabricated DSSCs, which was confirmed from the I-V curve, is in the range from 0.84 to 2.15%. This study confirms that mint (Mentha) dye and Nd-doped BiFeO3 materials were found to be the most efficient sensitizer and photoanode materials among all the sensitizers and photoanodes tested.

Synthesis and Characterization of Polyvinyl Chloride Matrix Composites with Modified Scrap Iron for Advanced Electronic, Photonic, and Optical Systems.

In this study, Fe2O3 powder was synthesized using the co-precipitation method from scrap iron, which was then treated with varying concentrations of copper. Afterwards, the modified Fe2O3 was reinforced in the PVC matrix by using the solution-casting method to synthesize PVC composite films, which were subjected to a UV-visible spectrophotometer, a Fourier transform infrared spectrophotometer, an X-ray diffractometer, and a thermal gravimetric analyzer to evaluate the optical, chemical, structural, and thermal properties. FTIR analysis reveals the formation of the composite through vibrational bands pertaining to both components present, whereas no significant changes in the XRD patterns of PVC were observed after the doping of modified iron oxide, which reveals the compatibility of fillers with the PVC matrix. The optical properties of the copper-doped iron oxide-PVC composites, including absorbance, refractive index, urbach energy, and optical as well as electrical conductivity are measured, and show an increase in optical activity when compared to the pure PVC compound. Moreover, the increased thermal stability of the synthesized composite was also observed and compared with conventional compounds, which, in accordance with all the other mentioned properties, makes the copper-dopped iron oxide-PVC composite an effective material for electronic, photonic, and optical device applications.

Surfactant-mediated extraction of capsaicin from Capsicum annuum L. fruit in various solvents.

Capsaicin is a valuable compound found in Capsicum annuum. The present study aimed to explore the efficiency of different solvents and surfactants on its extraction by maceration. Ethyl acetate was found to be the best solvent followed by dichloromethane and acetone, respectively. Overall order of efficiency of the solvents used was this: ethyl acetate > dichloromethane > acetone > glycerol > acetonitrile > methanol > acetic acid > toluene. Extractability of ethyl acetate for capsaicin remained unaffected by the surfactants. Tween-80 had very positive effect on the extraction efficiency of dichloromethane (DCM) and acetone. Kinetics of the extraction with the most efficient solvent ethyl acetate showed extraction of capsaicin to follow a pseudo-second order kinetic model. In conclusion, for extraction of capsaicin from green chili, ethyl acetate was the most powerful amongst the solvents used in the present work and tween-80 had a notable positive effect on the efficiency of DCM and acetone.

Extraction and Characterization of Microcrystalline Cellulose from Lagenaria siceraria Fruit Pedicles.

Microcrystalline cellulose (MCC) is a versatile polymer commonly employed in food, chemical, and biomedical formulations. Lagenaria siceraria (bottle gourd) fruit is consumed in many parts of the world, and its pedicle is discarded as waste. In the quest for a novel renewable source of the MCC, the present study investigates the extraction and characterization of MCC from the pedicle of Lagenaria siceraria fruits. The MCC was extracted by sequentially treating pedicles with water, alkali, bleaching (sodium chlorite), and dilute sulfuric acid (acid hydrolysis). The removal of associated impurities from pedicle fibers was confirmed by Fourier transform infrared analyses. The extracted MCC exhibited a characteristic crystalline structure of cellulose in X-ray diffraction with a 64.53% crystallinity index. The scanning electron microscopy (SEM) showed the variation in the morphology of the fibers and the formation of MCC of approximately 100 µm. The thermogravimetric analysis (TGA) indicated higher thermal stability of MCC. MCC production from biowaste (pedicle) holds potential for application as an emulsifier, stabilizer, and thickener in the chemical, pharmaceutical, and food industries.

Multivariate Investigation of Toxic and Essential Metals in the Serum from Various Types and Stages of Colorectal Cancer Patients.

Colorectal cancer (CRC) is currently one of the most frequent malignant neoplasms, ranking 3rd in incidence and 2nd in mortality both in the USA and across the world. The pathogenesis of CRC is a complex interaction between genetic susceptibility and environmental factors such as exposure to metals. Therefore, the present study was intended to assess the imbalances in the concentrations of selected essential/toxic elements (Pb, Cr, Fe, Zn, As, Cd, Cu, Se, Ni, and Hg) in the serum of newly diagnosed colorectal carcinoma patients (n = 165) in comparison with counterpart controls (n = 151) by atomic absorption spectrometry after wet-acid digestion method. Serum carcinoembryonic antigen (CEA) of the CRC patients was determined using immunoradiometric method. Body mass index (BMI) which is an established risk factor for CRC was also calculated for patients and healthy controls. Conversely, average Ni (2.721 µg/g), Cd (0.563 µg/g), As (0.539 µg/g), and Pb (1.273 µg/g) levels were significantly elevated in the serum of CRC patients compared to the healthy donors, while the average Se (7.052 µg/g), Fe (15.67 µg/g), Cu (2.033 µg/g), and Zn (8.059 µg/g) concentrations were elevated in controls. The correlation coefficients between the elements in the cancerous patients demonstrated significantly dissimilar communal relationships compared with the healthy subjects. Significant differences in the elemental levels were also showed for CRC types (primary colorectal lymphoma, gastrointestinal stromal tumor, and adenocarcinoma) and CRC stages (stage-I, stage-II, stage-III, and stage-IV) among the patients. Majority of the elements demonstrated perceptible disparities in their levels based on dietary, habitat, gender, and smoking habits of the malignant patients and healthy subjects. Multivariate methods revealed noticeably divergent apportionment among the toxic/essential elements in the cancerous patients than the healthy counterparts. Overall, the study showed significantly divergent distribution and associations of the essential and toxic elemental levels in the serum of the CRC patients in comparison with the healthy donors.

The role of size-controlled CeO2 nanoparticles in enhancing the stability and photocatalytic performance of ZnO in natural sunlight exposure.

In order to enhance the photocatalytic performance and stability, the various proportions of the size controlled cerium oxide (CeO2) nanoparticles were dispersed at the pre-synthesized ZnO. Although, the expected dual absorption onsets, probably due to the diminutive difference between the bandgaps of CeO2 (∼2.9 eV) and ZnO (∼3.1 eV), were not observed however, a blue shift in the bandgap energy of ZnO was witnessed with the increasing surface density of CeO2 particles. The delayed excitons recombination process with the increasing concentration of CeO2 nanoparticles was verified by the PL spectra. The structural investigation by Raman and XRD analysis revealed the surface attachment of CeO2 particles without altering the rock-salt lattice of ZnO. The morphological and fine microstructural analysis established the uniform distribution of evenly sized CeO2 particles at the surface of ZnO with the discrete fringe patterns of both the entities whereas the XPS analysis confirmed the majority of Ce4+ in dispersed CeO2. In comparison to pure ZnO, cyclic voltammetric (CV) analysis, under illumination, exposed the supportive role of surface residing CeO2 particles in eradicating the photo-corrosion of ZnO whereas the chronopotentiometry (CP) predicted the prolonged life-span of the excitons. Compared to pure ZnO, an appreciably high activity was revealed for 10% CeO2 loading as compared to pure ZnO for the removal of mono and di-nitrophenol derivatives and their mixtures under natural sunlight exposure. The variations in the removal rates in the mixture as compared to individual nitrophenol exposed the structure-based priority of ROS for the respective phenol. The significantly enhanced photocatalytic activity of the composite catalysts revealed the incremental role of surface-mounted CeO2 entities in boosting the generation of ROS under sunlight irradiation. The experimental observations were correlated and compiled to establish the mechanism of the removal process.

Study of anti-diabetic, beta-carotene-bleaching inhibiting and iron chelating properties of Carissa opaca root extracts

Abstract Degenerative diseases diabetes and oxidative stress constitute a major health concern worldwide. Medicinal plants are expected to provide effective and affordable remedies. The present research explored antidiabetic and antioxidant potential of extracts of Carissa opaca roots. Methanolic extract (ME) was prepared through maceration. Its fractions were obtained, sequentially, in hexane, chloroform, ethyl acetate and n-butanol. An aqueous decoction (AD) of the finely ground roots was obtained by boiling in distilled water. The leftover biomass with methanol was boiled in water to obtain biomass aqueous decoction (BAD). The extracts and fractions showed considerable porcine pancreatic α-amylase inhibitory activity with IC50 in the range of 5.38-7.12 mg/mL while acarbose had 0.31 mg/mL. The iron chelating activity in terms of EC50 was 0.2939, 0.3429, 0.1876, and 0.1099 mg/mL for AD, BAD, ME, and EDTA, respectively. The EC50 of beta-carotene bleaching activity for AD, BAD, ME, and standard BHA were 4.10, 4.71, 3.48, and 2.79 mg/mL, respectively. The total phenolic content (TPC) and total flavonoid content (TFC) of AD and BAD were also considerable. In general, ethyl acetate fraction proved to be the most potent. Thus, the C. opaca roots had excellent antioxidant activity while having moderate α-amylase inhibitory potentia

In Vitro Antidiabetic, Anti-Obesity and Antioxidant Analysis of Ocimum basilicum Aerial Biomass and in Silico Molecular Docking Simulations with Alpha-Amylase and Lipase Enzymes.

The present study explored phytochemicals, porcine pancreatic α-amylase (PPA) and lipase (PPL) inhibitory activities and antioxidant potential of polar and nonpolar extracts of the leaves and flowers of Ocimum basilicum and the in-silico mode of interaction between these enzymes and the major chemical constituents of the herb. The hexane extract (HE) and hydro-ethanolic extract (EE) obtained sequentially were used to estimate PPA and PPL inhibitory and antioxidant activities, total phenolic content (TPC) and total flavonoid content (TFC). Chemical constituents of the essential oils and HE were determined by GC-MS (Gas Chromatography-Mass Spectrometry). For PPA inhibition, IC50 (µg/mL) of the extracts were 0.27-0.37, which were close to 0.24 of acarbose, while for PPL inhibition, IC50 (µg/mL) of the extracts were 278.40-399.65, and that of Orlistat 145.72. The flowers EE was most potent antioxidant followed by leaves EE. The leaves EE had highest TPC and TFC followed of flowers EE. The essential oil of flowers had higher estragole (55%) than linalool (37%), while the essential oil of the leaves had higher linalool (42%) than estragole (38%). The HE of the flowers contained higher estragole (42%) than linalool (23%), while of the HE of the leaves too had higher estragole (65%) than linalool (18%). The in-silico molecular docking study showed linalool and estragole to have considerable PPA and PPL binding potential, which were further investigated through molecular dynamics simulations and binding free energy calculations. The PPA and PPL inhibitory activities of O. basilicum extracts and their notable antioxidant potential propose the herb as a multi-target complimentary medicine for diabetes, obesity and oxidative stress.

Synthesis, crystal structures, Hirshfeld surface analysis and spectroscopic studies of two Schiff bases of anisaldehyde and their urease and acetylcholinesterase inhibitory and antioxidant properties.

The growing demand of pharmaceutical industry for more effective drugs requires new molecules with promising medicinal activities. In the present work, a natural product anisaldehyde was treated with hydrazine and 3,5-dichloroaniline to synthesize their Schiff bases, ASB1 and ASB2, which were assessed for various bioactivities. ASB1 was synthesized by conventional reflux method while ASB2 was synthesized by reflux as well as by mechanochemical grinding method which gave higher yield. The bases were recrystalised, and their structures were elucidated based on XRD and spectroscopic studies. Hirshfeld surface analysis was also carried out. They showed considerable urease inhibitory activity, almost comparable with the standard thiourea. The activity of ASB1 was much higher than ASB2. Acetylcholinesterase inhibitory activity of ASB1 was also higher than that of ASB2. The antioxidant activities were determined using DPPH, ABTS radical scavenging and total antioxidant capacity (TAC) assays. The bases were very poor scavengers of DPPH radical. However, they showed considerable anti-radical activity against ABTS radical, ASB2 being more active than ASB1, while ASB1 showed higher TAC than ASB2. In conclusion, the bases appeared to have good drugability as inhibitors of urease and acetylcholinesterase enzymes. They can be easily synthesized for possible large-scale applications. The grinding method proved to be more efficient than the reflux method.