Development of Membranes and Separators to Inhibit Cross-Shuttling of Sulfur in Polysulfide-Based Redox Flow Batteries: A Review.

The global rapid transition from fossil fuels to renewable energy resources necessitates the implementation of long-duration energy storage technologies owing to the intermittent nature of renewable energy sources. Therefore, the deployment of grid-scale energy storage systems is inevitable. Sulfur-based batteries can be exploited as excellent energy storage devices owing to their intrinsic safety, low cost of raw materials, low risk of environmental hazards, and highest theoretical capacities (gravimetric: 2600 Wh/kg and volumetric: 2800 Wh/L). However, sulfur-based batteries exhibit certain scientific limitations, such as polysulfide crossover, which causes rapid capacity decay and low Coulombic efficiency, thereby hindering their implementation at a commercial scale. In this review article, we focus on the latest research developments between 2012-2023 to improve the separators/membranes and overcome the shuttle effect associated with them. Various categories of ion exchange membranes (IEMs) used in redox batteries, particularly polysulfide redox flow batteries and lithium-sulfur batteries, are discussed in detail. Furthermore, advances in IEM constituents are summarized to gain insights into different fundamental strategies for attaining targeted characteristics, and a critical analysis is proposed to highlight their efficiency in mitigating sulfur cross-shuttling issues. Finally, future prospects and recommendations are suggested for future research toward the fabrication of more effective membranes with desired properties.

Enhanced physical properties of γ-Al2O3-rGO hybrids prepared by solvothermal and hot-press processing.

In this study, a solvothermal method was employed for the first time to fabricate hybrids composed of cross-linked γ-Al2O3 nanorods and reduced graphite oxide (rGO) platelets. After calcination and hot-press processing, monoliths of Al2O3-rGO hybrids were obtained with improved physical properties. It was found that the oxygen-containing groups on graphene oxide were beneficial for the adsorption of aluminum isopropoxide, leading to a uniform dispersion of rGO with Al2O3, which was obtained by hydrolysis of aluminum isopropoxide during the solvothermal reaction. The hybrid, which was subsequently calcinated for 3 h showed electrical conductivity of 6.7 × 101 S m-1 together with 90% higher mechanical tensile strength and 80% higher thermal conductivity as compared to the bare Al2O3. In addition, the dielectric constant of the hybrid was 12 times higher than that of the bare Al2O3. In this study, the highest values of electrical conductivity (8.2 × 101 S m-1), thermal conductivity (2.53 W m-1 K-1), dielectric constant (104) and Young's modulus (3.7 GPa) were obtained for the alumina-rGO hybrid calcinated for 1 h. XRD characterization showed that an increase in calcination temperature and further hot-press processing at 900 °C led to enhanced crystallinity in the γ-Al2O3 nanorods in the hybrid, resulting in enhanced physical properties in the hybrids.

Visible light photocatalytic water disinfection and its kinetics using Ag-doped titania nanoparticles.

The UN estimated about five million deaths every year due to water-borne diseases, accounting from four billion patients. Keeping in view, the ever increasing health issues and to undermine this statistics, a reliable and sustainable water-treatment method has been developed using visible light for water treatment. titania nanoparticles (NPs) have been synthesized successfully by a more applicable method Viz: liquid impregnation (LI) method. The bacterial death rate by photocatalysis under visible light was studied by employing a typical fluorescent source and was found to follow pseudo first-order reaction kinetics. The nanoparticles were characterized using X-ray diffraction (XRD), scanning electron microscopy, and energy-dispersive X-ray spectroscopy to deduce their size range, surface morphology, and elemental compositions, respectively. Among all the prepared grades, 1% Ag-TiO2 was found to be a very effective photocatalytic agent against Escherichia coli. The resulted photoinactivated data were also evaluated by different empirical kinetic models for bacterial inactivation. Hom, Hom-power, Rational, and Selleck models were not able to explain the disinfection kinetics but modified-Hom model fitted best with the experimentally obtained data by producing a shoulder, log-linear, and a tail region.