Electron Manipulation and Surface Reconstruction of Bimetallic Iron-Nickel Phosphide Nanotubes for Enhanced Alkaline Water Electrolysis.

Developing high-efficiency and stable bifunctional electrocatalysts for water splitting remains a great challenge. Herein, NiMoO4 nanowires as sacrificial templates to synthesize Mo-doped NiFe Prussian blue analogs are employed, which can be easily phosphorized to Mo-doped Fe2xNi2(1-x)P nanotubes (Mo-FeNiP NTs). This synthesis method enables the controlled etching of NiMoO4 nanowires that results in a unique hollow nanotube architecture. As a bifunctional catalyst, the Mo-FeNiP NTs present lower overpotential and Tafel slope of 151.3 (232.6) mV at 100 mA cm-2 and 76.2 (64.7) mV dec-1 for HER (OER), respectively. Additionally, it only requires an ultralow cell voltage of 1.47 V to achieve 10 mA cm-2 for overall water splitting and can steadily operate for 200 h at 100 mA cm-2. First-principles calculations demonstrate that Mo doping can effectively adjust the electron redistribution of the Ni hollow sites to optimize the hydrogen adsorption-free energy for HER. Besides, in situ Raman characterization reveals the dissolving of doped Mo can promote a rapid surface reconstruction on Mo-FeNiP NTs to dynamically stable (Fe)Ni-oxyhydroxide layers, serving as the actual active species for OER. The work proposes a rational approach addressed by electron manipulation and surface reconstruction of bimetallic phosphides to regulate both the HER and OER activity.

Recent Advances in Understanding of the Singlet Oxygen in Energy Storage and Conversion.

Singlet oxygen (term symbol 1 Δg , hereafter 1 O2 ), a reactive oxygen species, has recently attracted increasing interest in the field of rechargeable batteries and electrocatalysis and photocatalysis. These sustainable energy conversion and storage technologies are of vital significance to replace fossil fuels and promote carbon neutrality and finally tackle the energy crisis and climate change. Herein, the recent progresses of 1 O2 for energy storage and conversion is summarized, including physical and chemical properties, formation mechanisms, detection technologies, side reactions in rechargeable batteries and corresponding inhibition strategies, and applications in electrocatalysis and photocatalysis. The formation mechanisms and inhibition strategies of 1 O2 in particular aprotic lithium-oxygen (Li-O2 ) batteries are highlighted, and the applications of 1 O2 in photocatalysis and electrocatalysis is also emphasized. Moreover, the confronting challenges and promising directions of 1 O2 in energy conversion and storage systems are discussed.

Experimentally validated design principles of heteroatom-doped-graphene-supported calcium single-atom materials for non-dissociative chemisorption solid-state hydrogen storage.

Non-dissociative chemisorption solid-state storage of hydrogen molecules in host materials is promising to achieve both high hydrogen capacity and uptake rate, but there is the lack of non-dissociative hydrogen storage theories that can guide the rational design of the materials. Herein, we establish generalized design principle to design such materials via the first-principles calculations, theoretical analysis and focused experimental verifications of a series of heteroatom-doped-graphene-supported Ca single-atom carbon nanomaterials as efficient non-dissociative solid-state hydrogen storage materials. An intrinsic descriptor has been proposed to correlate the inherent properties of dopants with the hydrogen storage capability of the carbon-based host materials. The generalized design principle and the intrinsic descriptor have the predictive ability to screen out the best dual-doped-graphene-supported Ca single-atom hydrogen storage materials. The dual-doped materials have much higher hydrogen storage capability than the sole-doped ones, and exceed the current best carbon-based hydrogen storage materials.

Robust Micro-Sized and Defect-Rich Carbon-Carbon Composites as Advanced Anodes for Potassium-Ion Batteries.

Pitch-derived carbon (PC) anode features the merits of low-cost, rich edge-defect sites, and tunable crystallization degree for potassium ion batteries (PIBs). However, gaining the PC anode with both rich edge-defect sites and robust structure remains challenging. Herein, micro-sized and robust PC/expanded-graphite (EG) composites (EGC) with rich edge-defect sites are massively synthesized via melting impregnation and confined pyrolysis. The PC is in situ encapsulated in micro-sized EG skeleton with robust chemical bonds between PC and EG after thermal treatment, endowing the structural stability as micro-sized carbon-carbon composites. The confinement effect originating from EG skeleton could suppress the crystallization degree of the PC and contribute rich edge-defect sites in EGC composites. Additionally, the EG skeleton inside EGC could form continuous electronic conduction nets and establish low-tortuosity carbonaceous electrodes, facilitating rapid electron/ion migration. While applied in PIBs, the EGC anode delivers a reversible capacity that up to 338.5 mAh g-1 at 0.1 A g-1 , superior rate performance of 127.5 mAh g-1 at 5.0 A g-1 , and long-term stability with 204.8 mAh g-1 retain after 700 cycles at 1.0 A g-1 . This novel strategy highlights an interesting category of heterogeneous carbon-carbon composite materials to keep pace with the demand for the future PIBs industry.

Efficient Design for a High-Energy and High-Power Capability Hybrid Electric Power Device with Enhanced Electrochemical Interfaces.

Fabrication of novel electrode architectures with tailored electrochemical interfaces (EI) is an effective strategy for enhancing charge and mass transport processes within electrochemical devices. Here, we design and fabricate a well-hybrid electrode based on the coupling of polyaniline (PANI) nanowires and Pt-based electrocatalysts to manufacture a hybrid electric power device (HEPD) combining the advantages of supercapacitors and fuel cells. Because of the boosted charge transfer between PANI nanowires and Pt-based materials via enhanced EIs, the HEPD assembled with hybrid electrodes shows remarkable performance with a peak power density of 222 mW cm-2, a specific power of 3810 W kg-1, and a specific energy of 2100 Wh kg-1, normalized to the mass of membrane electrode assemblies. The in situ Raman spectra and extended electrochemical studies demonstrate the intrinsic mechanism of charge transfer processes within hybrid electrodes, shedding light on the alternative progress of electrochemical energy conversion systems and storage devices.

Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries.

Rechargeable batteries are considered promising replacements for environmentally hazardous fossil fuel-based energy technologies. High-energy lithium-metal batteries have received tremendous attention for use in portable electronic devices and electric vehicles. However, the low Coulombic efficiency, short life cycle, huge volume expansion, uncontrolled dendrite growth, and endless interfacial reactions of the metallic lithium anode are major obstacles in their commercialization. Extensive research efforts have been devoted to address these issues and significant progress has been made by tuning electrolyte chemistry, designing electrode frameworks, discovering nanotechnology-based solutions, etc. This Review aims to provide a conceptual understanding of the current issues involved in using a lithium metal anode and to unveil its electrochemistry. The most recent advancements in lithium metal battery technology are outlined and suggestions for future research to develop a safe and stable lithium anode are presented.

Chemical Foaming Coupled Self-Etching: A Multiscale Processing Strategy for Ultrahigh-Surface-Area Carbon Aerogels.

Due to the unique structure, carbon aerogels have always shown great potential for multifunctional applications. At present, it is highly desirable but remains challenging to tailor the microstructures with respect to porosity and specific surface area to further expand its significance. A facile chemical foaming coupled self-etching strategy is developed for multiscale processing of carbon aerogels. The strategy is directly realized via the pyrolysis of a multifunctional precursor (pentaerythritol melamine phosphate) without any special drying process and multiple steps. In the micrometer scale, the macroporous scaffold structures with interconnected and strutted carbon nanosheets are built up by chemical foaming from decomposition of melamine, whereas the meso/microporous nanosheets are formed via self-etching by phosphorus-containing species. The delicately hierarchical structures and record-breaking specific surface area of 2668.4 m2 g-1 render the obtained carbon aerogels great potentials for absorption (324.1-593.6 g g-1 of absorption capacities for varied organic solvents) and energy storage (338 F g-1 of specific capacitance). The construction of such novel carbon nanoarchitecture will also shed light on the design and synthesis of multifunctional materials.