[Finite element analysis of five internal fixation modes in treatment of Day type â ¡crescent fracture dislocation of pelvis].

Objective: To compare the biomechanical differences among the five internal fixation modes in treatment of Day type Ⅱ crescent fracture dislocation of pelvis (CFDP), and find an internal fixation mode which was the most consistent with mechanical principles. Methods: Based on the pelvic CT data of a healthy adult male volunteer, a Day type Ⅱ CFDP finite element model was established by using Mimics 17.0, ANSYS 12.0-ICEM, Abaqus 2020, and SolidWorks 2012 softwares. After verifying the validity of the finite element model by comparing the anatomical parameters with the three-dimensional reconstruction model and the mechanical validity verification, the fracture and dislocated joint of models were fixed with S 1 sacroiliac screw combined with 1 LC-Ⅱ screw (S 1+LC-Ⅱ group), S 1 sacroiliac screw combined with 2 LC-Ⅱ screws (S 1+2LC-Ⅱ group), S 1 sacroiliac screw combined with 2 posterior iliac screws (S 1+2PIS group), S 1 and S 2 sacroiliac screws combined with 1 LC-Ⅱ screw (S 1+S 2+LC-Ⅱ group), S 2-alar-iliac (S 2AI) screw combined with 1 LC-Ⅱ screw (S 2AI+LC-Ⅱ group), respectively. After each internal fixation model was loaded with a force of 600 N in the standing position, the maximum displacement of the crescent fracture fragments, the maximum stress of the internal fixation (the maximum stress of the screw at the ilium fracture and the maximum stress of the screw at the sacroiliac joint), sacroiliac joint displacement, and bone stress distribution around internal fixation were observed in 5 groups. Results: The finite element model in this study has been verified to be effective. After loading 600 N stress, there was a certain displacement of the crescent fracture of pelvis in each internal fixation model, among which the S 1+LC-Ⅱ group was the largest, the S 1+2LC-Ⅱ group and the S 1+2PIS group were the smallest. The maximum stress of the internal fixation mainly concentrated at the sacroiliac joint and the fracture line of crescent fracture. The maximum stress of the screw at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum stress of the screw at the ilium fracture was the largest in the S 1+2PIS group and the smallest in the S 1+2LC-Ⅱ group. The displacement of the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 1+S 2+LC-Ⅱ group. In each internal fixation model, the maximum stress around the sacroiliac screws concentrated on the contact surface between the screw and the cortical bone, the maximum stress around the screws at the iliac bone concentrated on the cancellous bone of the fracture line, and the maximum stress around the S 2AI screw concentrated on the cancellous bone on the iliac side. The maximum bone stress around the screws at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum bone stress around the screws at the ilium was the largest in the S 1+2PIS group and the smallest in the S 1+LC-Ⅱ group. Conclusion: For the treatment of Day type Ⅱ CFDP, it is recommended to choose S 1 sacroiliac screw combined with 1 LC-Ⅱ screw for internal fixation, which can achieve a firm fixation effect without increasing the number of screws.

Comparison of the intraarticular osteotomy and the "window" osteotomy in the treatment of tibial plateau fracture involving depressed posterolateral fragments.

OBJECTIVES: The methods of reduction of depressed posterolateral fragments in tibial plateau fracture through anterolateral approaches remain controversial. This paper aimed to compare the intraarticular osteotomy technique and the "window" osteotomy technique for the reduction of depressed posterolateral fragments through anterolateral approach. METHOD: From January 2015 to January 2022, we retrospectively reviewed the data on patients with tibial plateau fracture involving depressed posterolateral fragments treated with the intraarticular osteotomy or the "window" osteotomy. 40 patients underwent the intraarticular osteotomy were divided into group A, while 36 patients underwent the "window" osteotomy were divided into group B. The operative time, bone grafting volume, fracture healing time, complication, reduction quality and postoperative functional results were compared between the two groups. RESULTS: The average follow-up duration was 16.6 ± 3.7 months. The average bone grafting volume for all patients in group B was essential larger than group A (p = 0.001). Compared to group B, patients in groups A had significantly shorter fracture healing time (p = 0.011). The depth of depressed articular surface, PSA and the radiographic evaluation at 2 days and 6 months after surgery in group A were significantly lower than group B (p<0.05). Based on the HSS knee-rating score, no significant difference in function results was found between the two groups (p>0.05). No significant difference was found in operation time and blood loss between the two groups (p>0.05). CONCLUSION: The intraarticular osteotomy could obtain satisfactory clinical results in tibial plateau fracture involving posterolateral fragments.

Three-Dimensional Printed Plate Template Versus Hemipelvis Model in Patient-Specific Plate Preparation for Posterior Wall Acetabular Fractures.

OBJECTIVE: The application of three-dimensional (3D) printing technology in the management of posterior wall acetabular fractures can greatly reduce surgical invasiveness and operative time and simplify the procedure of reconstruction plate contouring, but the cost and time of patient-specific plate preparation on the basis of traditional 3D-printed pelvis model should not be neglected. We described a new method for patient-specific plate preparation by using 3D-printed plate template. The study aimed to assess the effectiveness and feasibility of the 3D-printed plate template in patient-specific plate preparation for posterior wall acetabular fractures. METHODS: A total of 65 cases of posterior wall acetabular fractures with surgical treatment from December 2012 to December 2020 were chosen. According to the different plate contouring methods, the 65 cases were divided into three groups, which were group A (21 cases), group B (20 cases), and group C (24 cases). In group A, the 3D-printed plate template was used to contour the patient-specific reconstruction plate before surgery, whereas the 3D-printed hemipelvis model was adopted for group B. In group C, the reconstruction plate was contoured intraoperatively. Among the three groups, the instrumentation time, surgical time, blood loss, patient-specific plate preparation time, complications, reduction quality, and hip function were compared. The Kruskal-Wallis test was used to analyze the reduction quality and hip function among three groups. RESULTS: In comparison with group C, patients in groups A and B were featured by obviously shorter instrumentation time (-22, -23 min), shorter surgical time (-46, -44 min), and less intraoperative blood loss (-110, -122 mL). Compared to the hemipelvis model in group B (2.29 ± 0.56 vs. 12.70 ± 3.79 days), the 3D printing time for plate templates in group A was significantly shorter. The reduction quality and hip function had no obvious statistical difference among the three groups. The complication rate within group A (3/21) and group B (3/20) were both slightly lower than group C (5/24), with no obvious difference. CONCLUSIONS: Both the patient-specific pre-contoured plate fixation methods based on the 3D-printed hemipelvis model and plate template can achieve satisfactory clinical efficacy, with the advantage of shorter instrumentation and surgical time, and less intraoperative blood loss. However, 3D printing of plate template is easier and less time-consuming, considering the shorter time and less cost for 3D printing of physical model.

Modified classifications and surgical decision-making process for chronic anterior talofibular ligament injuries based on the correlation of imaging studies and arthroscopic findings.

PURPOSE: Surgical treatment of chronic ankle instability (CAI) typically includes ligament repair or reconstruction. Using preoperative ultrasonography or magnetic resonance imaging (MRI) to choose an appropriate arthroscopic procedure is still difficult. The aim of this study was to evaluate the correlation of imaging studies with arthroscopic findings and support the arthroscopic surgical decision-making process. METHODS: One hundred twelve patients with chronic anterior talofibular ligament (ATFL) injuries were treated using the arthroscopic surgical decision-making process from November 2018 to August 2020. Preoperative imaging assessments using dynamic ultrasonography, MRI, and combined methods were applied to categorize the ATFL remnants into three quality grades ("good," "fair," and "poor"). Arthroscopic findings were classified into 6 major types (7 subtypes) and used to select an appropriate surgical procedure. Correlations between imaging studies, arthroscopic findings, and surgical methods were evaluated. Diagnostic parameters, clinical outcomes, and complications were also assessed. RESULTS: There was a significant interobserver agreement in the evaluation of dynamic ultrasonography (0.954, P < 0.001), MRI (0.958, P < 0.001), and arthroscopy diagnosis (0.978, P < 0.001). There was a significant correlation between the modified imaging classifications, arthroscopic diagnostic types, and surgical procedures. The mean follow-up period was 33.58 ± 8.85 months. Significant improvements were documented in postoperative ankle functions when assessed with Karlson-Peterson scores and Cumberland Ankle Instability Tool scores. The risk of complications is also very low. CONCLUSION: The modified classifications and surgical decision-making process based on dynamic ultrasonography, MRI, and arthroscopic findings, as proposed in this study, might help in selecting an appropriate arthroscopic surgical procedure for chronic ATFL injuries.

[Osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in treatment of tibial plateau fractures involving posterolateral column collapse].

Objective: To investigate the effectiveness of osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in the treatment of tibial plateau fractures involving posterolateral column collapse. Methods: A clinical data of 23 patients with tibial plateau fractures involving posterolateral column collapse, who had undergone osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation between January 2015 and June 2021, was retrospectively analyzed. There were 14 males and 9 females with an average age of 42.6 years ranging from 26 to 62 years. The causes of injury included traffic accident in 16 cases, falling from height in 5 cases, and other injuries in 2 cases. According to Schatzker classification, there were 15 cases of type Ⅴ and 8 cases of type Ⅵ. The time from injury to operation was 4-8 days with an average of 5.9 days. The operation time, intraoperative blood loss, fracture healing time, and complications were recorded. The depth of articular surface collapse of posterolateral column and posterior inclination angle (PSA) of the tibial plateau were compared before operation and at 2 days and 6 months after operation; fracture reduction of tibial plateau fracture was evaluated by Rasmussen anatomic score. The recovery of knee function was evaluated by Hospital for Special Surgery (HSS) score at 2 days and 6 months after operation. Results: All 23 patients were completed the operation successfully. The operation time was 120-195 minutes, with an average of 152.8 minutes; the intraoperative blood loss was 50-175 mL, with an average of 109.5 mL. All patients were followed up 12-24 months, with an average of 16.7 months. One patient had superficial wound infection after operation, and the incision healed after dressing change; primary healing of incision of other patients was obtained. The fracture healing time was 12-18 weeks, with an average of 13.7 weeks. No failure of internal fixation, varus and valgus deformity of the knee joint, and instability of the knee joint was found at last follow-up. One patient developed joint stiffness and the range of motion of the knee joint was 10°-100°; the range of motion of the knee joint of other patients was 0°-125°. At 2 days and 6 months after operation, the depth of articular surface collapse of posterolateral column, PSA, and Rasmussen anatomic scores significantly improved when compared with those before operation ( P<0.05). There was no significant difference between the two postoperative time points ( P>0.05). The HSS score at 6 months after operation was significantly higher than that at 2 days after operation ( P<0.05). Conclusion: For tibial plateau fractures involving posterolateral column collapse, reduction and internal fixation through osteotomy of non-core weight-bearing area of the lateral tibial plateau has the advantages of fully expose the posterolateral column fragment, good articular surface reduction, sufficient bone grafting, and fewer postoperative complications. It is beneficial to restore knee joint function and can be widely used in clinic.

Modified mini-incision "internal splinting" versus percutaneous repair technique of acute Achilles tendon rupture: five year retrospective case-controlled study.

PURPOSE: Several kinds of minimally invasive surgical techniques are applied to acute Achilles tendon rupture. The risks of sural never injury and re-ruptures are still major issues. The purpose of this study was to compare the middle-term results of two different minimally invasive repair techniques for acute Achille tendon rupture. METHODS: Twenty-four cases underwent the modified mini-incision "internal splinting" repair technique in group A, and 29 cases underwent a percutaneous repair technique in group B and were evaluated. The intra-operative data, complications, the time of recovery, and the post-operative magnetic resonance imaging were analyzed. At the final follow-up, the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and Thermann score were evaluated. RESULTS: The mean follow-up time was 59.96 ± 4.16 months (range 48-67). At the final follow-up, the AOFAS score and Thermann score in both groups had similar feedback. No nerve injury, infection, or re-rupture was encountered in group A, except two cases with anchor irritation. One case with sural nerve injury and one with a re-rupture were recorded in group B, respectively. The final MRI showed thicker regeneration of the tendon in both groups. CONCLUSIONS: The middle-term results indicated the modified mini-incision "internal splinting" technique for acute Achilles tendon rupture is similar to the percutaneous repair technique. A lower risk of sural nerve injury and re-rupture may be advantages.