RESUMO
Groundwater was a desired alternative for decentralized water supply. However, the presence of iron, manganese and ammonia significantly limited its extensive adoptions. In this study, an innovative gravity-driven membrane (GDM) process has been developed to address such problems. The results indicated that GDM process can efficiently diminish the concentrations of iron, manganese and ammonia, with average removal efficiencies of 97%, 95% and 70%, respectively, since the bio-cake layer on the membrane surface can serve as a dynamic barrier for the foulants rejection. In GDM filtration, the manganese removal was mainly attributed to the synergistic effects between the chemically auto-catalytic oxidation by manganese oxides (MnOx) and biological activity by manganese-oxidizing bacteria (MnOB). Pre-addition of MnOx particles into GDM system could significantly enhance the manganese removal and shorten its ripening time by approximately 50%. During long-term filtration, the fluxes of GDM remained stabilized (4-5 L m-2 h-1), and MnOx particles pre-additions could improve the stable fluxes by 23%-37%. The flux stabilization of GDM process was mainly determined by the heterogeneous structures of bio-cake layer, and the generated iron and manganese oxides would improve its heterogeneities. Furthermore, MnOx assisted GDM process conferred robust capacities in resisting the shock loading of manganese and ammonia in the feed water, and the highest concentrations of manganese and ammonia were suggested to be less than 2.96 mg/L and 0.9 mg/L, respectively. Therefore, these findings are full of relevance to develop new strategies to treat the iron- and manganese-containing groundwater and promote the extensive application of UF technology for decentralized water supply.
Assuntos
Água Subterrânea , Purificação da Água , Filtração , Ferro , Manganês , UltrafiltraçãoRESUMO
Bacterial adhesion on mineral surface are of fundamental importance in geochemical processes and biogeochemical cycling, such as mineral transformation and clay-mediated biodegradation. In this study, thermodynamics analysis combined with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory as well as the extended DLVO (XDLVO) theory were employed to investigate the adhesion of the Gram-negative PAH-degrading bacteria Sphingomonas sp. GY2B on montmorillonite (Mt). Scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) indicated the affinity of GY2B for Mt, and the experimental results could be described well by pseudo-second-order (R2â¯=â¯0.997) and Langmuir model (R2â¯=â¯0.995). The thermodynamics analysis revealed the physical nature of bacterial adhesion onto Mt, which was confirmed by the XDLVO theory. The related surface properties (Zeta potential, hydrodynamic diameter and hydrophobicity) at different ionic strength were determined and the interaction energy between Mt and GY2B were also calculated using the DLVO and XDLVO theories in KCl or CaCl2 solution. At low ionic strength (≤ 20â¯mM), GY2B adhesion onto Mt was primarily driven by long-range DLVO forces (e.g. electrostatic repulsion), while short-range (separation distance < 5â¯nm) Van der Waals and hydrophobic interactions played more important roles in the bacterial adhesion at higher ionic strength (50-100â¯mM). In addition, Mt had a better adhesion capacity to bacteria in Ca2+ solution than that in K+ solution, owing to less negative charge and lower energy barrier in mineral-bacteria system in Ca2+ solution. Overall, the adhesion of bacteria onto Mt could be evaluated well on the basis of the XDLVO theory along with thermodynamics analysis. This study provides valuable insights into the clay-mediated microbial remediation of hydrophobic organic contaminants in the environment.
RESUMO
Mimicking the highly organized brick-and-mortar structure of nacre, a kind of nacre-like organic-inorganic composite material of polyurethane (PU)/flaky bronze composite coatings with low infrared emissivity was successfully designed and prepared by using PU and flaky bronze powders as adhesives and pigments, respectively. The infrared emissivity and microstructure of the coatings were systematically investigated by infrared emissometer and scanning electron microscopy, respectively, and the cause of low infrared emissivity of the coatings was discussed by using the theories of one-dimensional photonic structure. The results show that the infrared emissivity of the nacre-like PU/flaky bronze composite coatings can be as low as 0.206 at the bronze content of 60 wt. %, and it is significantly lower than the value of PU/sphere bronze composite coatings. Microstructure observation illustrated that the nacre-like PU/flaky bronze composite coatings have similar one-dimensional photonic structural characteristics. The low infrared emissivity of PU/flaky bronze composite coatings is derived from the similar one-dimensional photonic structure in the coatings.