RESUMO
Synthesis of 2,5-furandicarboxylic acid (FDCA) can be achieved via catalytic oxidation of 5-hydroxymethylfurfural (5-HMF), in which both base and catalyst play important roles. This work presents the development of a simple synthesis method (based on a commercial parent 10â wt.% Pd/C catalyst) to prepare the bimetallic AuPd alloy catalysts (i. e., AuPd/C) for selective 5-HMF oxidation to FDCA. When using the strong base of NaOH, Pd and Au cooperate to promote FDCA formation when deployed either separately (as a physical mixture of the monometallic Au/C and Pd/C catalysts) or ideally alloyed (AuPd/C), with complete 5-HMF conversion and FDCA yields of 66 % vs 77 %, respectively. However, NaOH also promoted the formation of undesired by-products, leading to poor mass balances (<81 %). Comparatively, under weak base conditions (using NaHCO3 ), an increase in Au loading in the AuPd/C catalysts enhances 5-HMF conversion and FDCA productivity (due to the enhanced carbonyl oxidation capacity) which coincides with a superior mass balances of >97 %. Yet, the excessive Pd content in the AuPd/C catalysts was not beneficial in promoting FDCA formation.
RESUMO
Superglassy membranes synthesised by polymers of intrinsic microporosity (PIMs) suffer from physical aging and show poor gas permeance over time, especially thin membranes, due to the fast rearrangement of nonequilibrium polymer chains. Herein, we constructed a novel PIM-1 thin film nanocomposite membrane (TFN) using nanosized UiO-66-NH2 (≈10â nm)/carboxylated PIM-1 (cPIM-1) as the composite filler. Unlike conventional fillers, which interact with the polymer only via the surface, the UiO-66-NH2 /cPIM-1 forms a stable three-dimensional (3D) network intertwining with the polymer chains, being very effective to impede chain relaxation, and thus physical aging. Nanosizing of UiO-66-NH2 was achieved by regulating the nucleation kinetics using carbon quantum dots (CQD) during the synthesis. This led to increased surface area, and hence more functional groups to bond with cPIM-1 (via hydrogen bonding between -NH2 and -COOH groups), which also improved interfacial compatibility between the 3D network and polymer chains avoiding defect formation. As a result, the novel TFN showed significantly improved performance in gas separation along with reduced aging (i.e. ≈6 % loss in CO2 permeability over 63â days); the aged membranes had a CO2 permeance of 2504 GPU and ideal selectivity values of 37.2 and 23.8 for CO2 /N2 and CO2 /CH4 , respectively.
RESUMO
A vacuum membrane distillation (VMD) followed by crystallization (VMD-C) was developed for the recovery of water and salts from shale gas produced water (SGPW). Before VMD, the pretreatment of SGPW with Fenton oxidation-flocculation is applied, with the chemical oxygen demand (COD) concentration reduction of 75% and the total removal of the total suspended solids (TSS), Ca2+, and Mg2+ in SGPW. The pretreatment of SGPW mitigated the membrane fouling in the VMD and effectively prevented the reduction of membrane flux over time. The average flux of the PTFE membrane reached 12.1 kg m-2 h-1 during the separation of the pretreated SGPW at a feed flux of 40 L h-1 and a feed temperature of 40 °C. The rejection rate of the membrane to TDS in SGPW was over 99%. Fresh water with a conductivity of below 20 µs cm-1 was produced by VMD-C. The salts concentrated upstream of the membrane were recovered by a stirring crystallization process. The VMD-C system resulted in a 61% cost savings compared to conventional SGPW treatment.
Assuntos
Purificação da Água , Água , Água/química , Vácuo , Sais/química , Gás Natural , Purificação da Água/métodos , Destilação/métodos , Cristalização , Membranas Artificiais , Cloreto de SódioRESUMO
A bimetallic catalytic membrane microreactor (CMMR) with bimetallic nanoparticles in membrane pores has been fabricated via flowing synthesis. The bimetallic nanoparticle is successfully immobilized in membrane pores along its thickness direction. Enhanced synergistic catalysis can be expected in this CMMR. As a concept-of-proof, Cu-Ag core-shell nanoparticles have been fabricated and immobilized in membrane pores for p-nitrophenol (p-NP) hydrogenation. Transmission electron microscopy (TEM) for the characterization of the bimetallic core-shell nanostructure and X-ray photoelectron spectroscopy (XPS) for the characterization of the electron transfer behavior between Cu-Ag bimetal have been performed. The Ag shell on the core of Cu can improve the utilization of Ag atoms, and electron transfer between bimetallic components can promote the formation of high electron density active sites as well as active hydrogen with strong reducing properties on the Ag surface. The dispersed membrane pore can prevent nanoparticle aggregation, and the contact between the reaction fluid and catalyst is enhanced. The enhanced mass transfer can be achieved by the plug-flow mode during the process of hydrogenation catalysis. The p-NP conversion rate being over 95% can be obtained under the condition of a membrane flux of 1.59 mL·cm-2·min-1. This Cu-Ag/PES CMMR has good stability and has a potential application in industry.
RESUMO
A vacuum membrane distillation bioreactor (VMDBR) by permeate fractional condensation and mechanical vapor compression with PTFE membrane was developed for bioethanol production. Cell concentration of 11.5â¯g/L, glucose consumption rate of 5.2â¯g/L/h and ethanol productivity of 2.3â¯g/L/h could be obtained with fermentation continues lasting for 140â¯h. Membrane flux of over 10â¯kg/m2/h could be obtained for model solution separation. Higher temperature and flow rate could promote membrane separation. Membrane flux could be reduced to about 2000â¯g/m2/h with fermentation proceeding owing to the deposited cell on membrane surface. The membrane separation performance could be resumed by water rinse. High ethanol concentration of 421â¯g/L could be obtained by permeate fractional condensation with the process separation factor increased to 19.2. Energy of only 14â¯MJ/kg was required in VMDBR and the energy consumption would be reduced further if the compressed vapor could be used to heat the feed.