RESUMO
The piezoelectric properties of lead zirconate titanate [Pb(Zr,Ti)O3 or PZT] ceramics could be enhanced by fabricating textured ceramics that would align the crystal grains along specific orientations. We present a seed-passivated texturing process to fabricate textured PZT ceramics by using newly developed Ba(Zr,Ti)O3 microplatelet templates. This process not only ensures the template-induced grain growth in titanium-rich PZT layers but also facilitates desired composition through interlayer diffusion of zirconium and titanium. We successfully prepared textured PZT ceramics with outstanding properties, including Curie temperatures of 360°C, piezoelectric coefficients d33 of 760 picocoulombs per newton and g33 of 100 millivolt meters per newton, and electromechanical couplings k33 of 0.85. This study addresses the challenge of fabricating textured rhombohedral PZT ceramics by suppressing the otherwise severe chemical reaction between PZT powder and titanate templates.
RESUMO
Defect engineering is a well-established approach to customize the functionalities of perovskite oxides. In demanding high-power applications of piezoelectric materials, acceptor doping serves as the state-of-the-art hardening approach, but inevitably deteriorates the electromechanical properties. Here, a new hardening effect associated with isolated oxygen vacancies for achieving well-balanced performances is proposed. Guided by theoretical design, a well-balanced performance of mechanical quality factor (Qm ) and piezoelectric coefficient (d33 ) is achieved in lead-free potassium sodium niobate ceramics, where Qm increases by over 60% while d33 remains almost unchanged. By atomic-scale Z-contrast imaging, hysteresis measurement, and quantitative piezoresponse force microscopy analysis, it is revealed that the improved Qm results from the inhibition of both extrinsic and intrinsic losses while the unchanged d33 is associated with the polarization contributions being retained. More encouragingly, the hardening effect shows exceptional stability with increasing vibration velocity, offering potential in material design for practical high-power applications such as pharmaceutical extraction and ultrasonic osteotomes.
RESUMO
Bi2 Te3 based thermoelectric alloys have been commercialized in solid-state refrigeration, but the poor mechanical properties restrict their further application. Nanotwins have been theoretically proven to effectively strengthen these alloys and could be sometimes constructed by strong deformation during synthesis. However, the obscure underlying formation mechanism restricts the feasibility of twin boundary engineering on Bi2 Te3 based materials. Herein, thorough microstructure characterizations are employed on a series of Bi0.4 Sb1.6 Te3+ δ alloys to systematically investigate the twins' formation mechanism. The results show that the twins belong to the annealing type formed in the sintering process, which is sensitive to Te deficiency, rather than the deformation one. The Te deficiency combined with mechanical deformation is prerequisite for constructing dense nanotwins. By reducing the δ below -0.01 and undergoing strong deformation, samples with a high density of nanotwins are obtained and exhibit an ultrahigh compressive strength over 250 MPa, nearly twice as strong as the previous record reported in hierarchical nanostructured (Bi, Sb)2 Te3 alloy. Moreover, benefitting from the suppressed intrinsic excitation, the average zT value of this robust material could reach near 1.1 within 30-250 °C. This work opens a new pathway to design high-performance and mechanically stable Bi2 Te3 based alloys for miniature device development.
RESUMO
Aberration-corrected scanning transmission electron microscopy (AC-STEM) has evolved into the most powerful characterization and manufacturing platform for all materials, especially functional materials with complex structural characteristics that respond dynamically to external fields. It has become possible to directly observe and tune all kinds of defects, including those at the crucial atomic scale. In-depth understanding and technically tailoring structural defects will be of great significance for revealing the structure-performance relation of existing high-property materials, as well as for foreseeing paths to the design of high-performance materials. Insights would be gained from piezoelectrics and thermoelectrics, two representative functional materials. A general strategy is highlighted for optimizing these functional materials' properties, namely defect engineering at the atomic scale.
RESUMO
In thermoelectrics, the material's performance stems from a delicate tradeoff between atomic order and disorder. Generally, dopants and thus atomic disorder are indispensable for optimizing the carrier concentration and scatter short-wavelength heat-carrying phonons. However, the strong disorder has been perceived as detrimental to the semiconductor's electrical conductivity owing to the deteriorated carrier mobility. Here, we report the sustainable role of strong atomic disorder in suppressing the detrimental phase transition and enhancing the thermoelectric performance in GeTe. We found that AgSnSe2 and Sb co-alloying eliminates the unfavorable phase transition due to the high configurational entropy and achieve the cubic Ge1-x-ySbyTe1-x(AgSnSe2)x solid solutions with cationic and anionic site disorder. Though AgSnSe2 substitution drives the carrier mean free path toward the Ioffe-Regel limit and minimizes the carrier mobility, the increased carrier concentration could render a decent electrical conductivity, affording enough phase room for further performance optimization. Given the lowermost carrier mean free path, further Sb alloying on Ge sites was implemented to progressively optimize the carrier concentration and enhance the density-of-state effective mass, thereby substantially enhancing the Seebeck coefficient. In addition, the high density of nanoscale strain clusters induced by strong atomic disorders significantly restrains the lattice thermal conductivity. As a result, a state-of-the-art zT ≈ 1.54 at 773 K was attained in cubic Ge0.58Sb0.22Te0.8(AgSnSe2)0.2. These results demonstrate that the strong atomic disorder at the high entropy scale is a previously underheeded but promising approach in thermoelectric material research, especially for the numerous low carrier mobility materials.
RESUMO
Self-assembled membranes with periodic wrinkled patterns are the critical building blocks of various flexible electronics, where the wrinkles are usually designed and fabricated to provide distinct functionalities. These membranes are typically metallic and organic materials with good ductility that are tolerant of complex deformation. However, the preparation of oxide membranes, especially those with intricate wrinkle patterns, is challenging due to their inherently strong covalent or ionic bonding, which usually leads to material crazing and brittle fracture. Here, wrinkle-patterned BaTiO3 (BTO)/poly(dimethylsiloxane) membranes with finely controlled parallel, zigzag, and mosaic patterns are prepared. The BTO layers show excellent flexibility and can form well-ordered and periodic wrinkles under compressive in-plane stress. Enhanced piezoelectricity is observed at the sites of peaks and valleys of the wrinkles where the largest strain gradient is generated. Atomistic simulations further reveal that the excellent elasticity and the correlated coupling between polarization and strain/strain gradient are strongly associated with ferroelectric domain switching and continuous dipole rotation. The out-of-plane polarization is primarily generated at compressive regions, while the in-plane polarization dominates at the tensile regions. The wrinkled ferroelectric oxides with differently strained regions and correlated polarization distributions would pave a way toward novel flexible electronics.