Opening magnetic hysteresis via improving the planarity of equatorial coordination by hydrogen bonding.

Through a mixed-ligand strategy, the structural change from a discrete dinuclear DyIII cluster to a one-dimensional polymeric chain was achieved, maintaining the two magnetic entities with the same {Dy(dppbO2)2(H2O)5} (dppbO2 = 1,4-butylenebis(diphenylphosphine oxide)) core structure. Since the hydrogen bonding between the equatorial coordinated water molecules and the guests/solvents/anions is distinct, the local geometry and the equatorial planarity of the first coordination sphere of the central DyIII ion become slightly different caused by the second coordination sphere. As a result, the dinuclear compound shows typical butterfly-shaped hysteresis loops, while it significantly opens at zero magnetic field up to 11 K for the 1D polymer, which is unprecedented in coordination polymers. Our experimental observations and theoretical analysis indicate that the hydrogen bonding leads to the fine-tuning of certain bond lengths and angles of the coordination environment, as well as the crystal field to a certain extent, revealing that the second coordination sphere affects the first coordination sphere by hydrogen bonding.

Analysis of machining process and thermal conditions during vibration-assisted cortical bone drilling based on generated bone chip morphologies.

When the temperature during bone drilling exceeds the safety threshold, the bone tissue surrounding the drilling site can be irreversibly damaged. To investigate the influence of vibration-assisted drilling (VAD) methods on the temperature increase during bone drilling and the causes for temperature increase, drilling experiments were performed on fresh bovine femur samples. The morphology and granularity distribution of the generated bone chips were innovatively used to directly compare the machining processes and thermal conditions of conventional drilling (CD), low-frequency vibration-assisted drilling (LFVAD), and ultrasonic vibration-assisted drilling (UVAD). The experimental results indicated that LFVAD produced the lowest temperature increase of 31.4°C, whereas UVAD produced the highest temperature increase of 44.1°C with the same drilling parameters. Additionally, the morphologies and granularity distributions of the bone chips significantly differed among these methods. We concluded that the smaller temperature increase in LFVAD was mainly attributed to the improved thermal conditions resulting from the periodic cutting/separation motion and the reliable geometric chip-breaking mechanism. In contrast, the unfavourable thermal conditions of UVAD were caused by the higher applied frequency, which created a significantly larger amount of friction heat. This was the main cause for the highest observed temperature increase, resulting in bone crushing processes that generated additional heat.

Experimental investigation of the temperature elevation in bone drilling using conventional and vibration-assisted methods.

Bone drilling is widely used in orthopaedics for inserting screws and fixing prostheses. Thermal necrosis is one of the major problems that may seriously affect post-operative recovery. Accordingly, this paper mainly focuses on comparing the influences of conventional drilling (CD), ultrasonic vibration-assisted drilling (UVAD) and low-frequency vibration-assisted drilling (LFVAD) methods, and drilling parameters on the temperature elevation in bone drilling process. A full factorial experiment was performed, and the temperatures were measured using an infrared camera. The lowest temperature elevation was obtained by LFVAD compared with CD and UVAD at the same drilling conditions. Setting CD as a reference, the maximum difference between LFVAD and CD was approximately -4 °C, whereas that between UVAD and CD was approximately 16 °C. The temperature elevation increases linearly with the spindle speed and follows an inverted U-shaped curve, with the feed rate having a peak at 40 min/mm in each drilling method. The results were discussed with regard to the features of LFVAD and UVAD. It was expected that the LFVAD could achieve minimal thermal damage and attain better results in the medical bone drilling process.

Improving Chinese Teachers' Stress Coping Ability through Group Sandplay.

Teachers are burdened by high work pressure, suggesting the need for an effective stress coping system to support them. The present study evaluated the effectiveness of coping strategies currently utilized by teachers and explored the potential contribution of group sandplay to coping. The study was led by a group of experienced therapists and sandplay practitioners. Two hundred teachers served as participants, equally divided into two groups: An experimental sandplay group (EG) and control group. Both groups received a 3-hour tutorial on the psychological pressure at work, reactions to it, and physical/mental symptoms resulting from overwhelming pressure, and were introduced to the working principles and process of sandplay. EG participants then engaged in group sandplay for three consecutive days. The Simplified Coping Style Questionnaire was used as an objective measure of participants' coping styles. Therapists' and practitioners' observations were used as subjective information, including the scenes and themes created by participants, individual performance during sandplay activities, and feedback regarding changes to stress coping strategies. We compared participants' pre-and post-test stress coping strategies. The results revealed a significant improvement in the EG sample at the shift from passive coping (pre-test M = 1.94, 95% CI [1.83-2.05]; post-test M = 0.96, 95% CI [0.92-1.00]) to active coping (pre-test M = 1.76, 95% CI [1.69-1.83]; post-test M = 2.41, 95% CI [2.29-2.53]). Overall, our findings support the conclusion that group sandplay effectively improved Chinese teachers' overall stress coping abilities.

Coordination and Supramolecular Assemblies of Fully Substituted Cyclopentanocucurbit[6]uril with Lanthanide Cations in the Presence of Tetrachlorozincate Anions, and Their Potential Applications.

Coordination and supramolecular assemblies of a fully substituted cyclopentanocucurbit[6]uril (CyP6Q[6]) with a series of lanthanide cations (Ln3+) have been investigated in the presence of tetrachlorozincate anion ([ZnCl4]2-). X-ray single-crystal diffraction analysis has revealed that the interaction of CyP6Q[6] and a series of Ln3+cations unexpectedly results in the formation of at least seven different CyP6Q[6]-based coordination complex adduct and supramolecular assemblies groups, including with (1) La3+, Ce3+cations; (2) Pr3+, Nd3+cations; (3) Eu3+, Gd3+, Tb3+, Dy3+ with P1̅ or P1 space group, in which CyP6Q[6] molecules coordinate alternatively with Ln3+cations and form linear coordination polymers; (4) CyP6Q[6] molecules interact alternatively with [Ho(H2O)8]3+ aqueous complexes and form linear supramolecular chains; CyP6Q[6] molecules can assemble two different Ln3+ free porous supramolecular assemblies from CyP6Q[6]-Ln(NO3)3-ZnCl2-HCl systems, Ln = Tm, Yb, and Lu; however, no solid crystals were obtained from system containing Er3+cation. Thus, these differences could lead CyP6Q[6] to be useful in not only the isolation of lighter lanthanides from their heavier lanthanides but also special selectivity for different volatile organic compounds.

Comfort evaluation of a subject-specific seating interface formed by vibrating grains.

Sitting is the most common posture for work in offices, and spinal cord injury (SCI) patients who are wheelchair dependent spend 10.6 h per day seated in wheelchairs. Thus, the comfort of subject-specific interfaces is increasingly important for the well-being of patients and office workers. This paper introduces a new method of forming a subject-specific interface, based on vibrating grains. Twenty subjects (10 females and 10 males) participated in the sitting test. Interface comfort was evaluated using the pressure distribution and subjective rating methods. Five seating interface types were compared. The results showed that compared with a flat interface, the interfaces formed by vibrating grains had a significantly reduced peak contact pressure (PeakCP) (by more than 58.03%), and that PeakCP was highly correlated with the comfort rating (R = -0.533) and discomfort rating(R = -0.603). This new method shows promise for guiding the future development of customized seating interfaces.

Improving Chinese teachers' stress coping ability through group sandplay

Teachers are burdened by high work pressure, suggesting the need for an effective stress coping system to support them. The present study evaluated the effectiveness of coping strategies currently utilized by teachers and explored the potential contribution of group sandplay to coping. The study was led by a group of experienced therapists and sandplay practitioners. Two hundred teachers served as participants, equally divided into two groups: An experimental sandplay group (EG) and control group. Both groups received a 3-hour tutorial on the psychological pressure at work, reactions to it, and physical/mental symptoms resulting from overwhelming pressure, and were introduced to the working principles and process of sandplay. EG participants then engaged in group sandplay for three consecutive days. The Simplified Coping Style Questionnaire was used as an objective measure of participants' coping styles. Therapists' and practitioners' observations were used as subjective information, including the scenes and themes created by participants, individual performance during sandplay activities, and feedback regarding changes to stress coping strategies. We compared participants' pre-and post-test stress coping strategies. The results revealed a significant improvement in the EG sample at the shift from passive coping (pre-test M = 1.94, 95% CI [1.83-2.05]; post-test M = 0.96, 95% CI [0.92-1.00]) to active coping (pre-test M = 1.76, 95% CI [1.69-1.83]; post-test M = 2.41, 95% CI [2.29-2.53]). Overall, our findings support the conclusion that group sandplay effectively improved Chinese teachers' overall stress coping abilities

No disponible

Protective effect of polydatin on learning and memory impairments in neonatal rats with hypoxic­ischemic brain injury by up­regulating brain­derived neurotrophic factor.

Polydatin is a key component of Polygonum cuspidatum, a herb with medical and nutritional value. The present study investigated the protective effect of polydatin against learning and memory impairment in neonatal rats with hypoxic­ischemic brain injury (HIBI). The unilateral common carotid artery ligation method was used to generate neonatal HIBI rats. Y­maze testing revealed that rats with HIBI exhibited memory impairment, while rats with HIBI treated with polydatin displayed enhanced long­term learning and memory. Of note, polydatin was found to upregulate the expression of hippocampal brain­derived neurotrophic factor (BDNF) in rats with HIBI. BDNF has a role in protecting HIBI­induced brain tissue injury and alleviating memory impairment. These findings showed that polydatin had a protective effect against learning and memory impairment in neonatal rats with HIBI and that the protective effect may be mediated through the upregulation of BDNF.

Functionalized bio-artifact fabricated via selective slurry extrusion. Part 1: Preparation of slurry containing tourmaline superfine powders.

The far infrared dental porcelain slurry for fabricating artificial tooth via selective slurry extrusion (SSE) of solid freeform fabrication (also known as rapid prototyping) techniques was prepared by using tourmaline as additive and employing ball-milling approach. After characterization by transmission electron microscopy, X-ray diffraction, and Fourier transform infrared spectrometry, it was found that the far infrared emission properties of the dental porcelain were apparently improved in the ranges of 2000-1201 cm(-1) and 881-600 cm(-1). This is due to the increase of the number of infrared active bonds that are from the tourmaline superfine powders. Moreover, it was also found that the tourmaline superfine powders can improve the pseudo-plastic properties of dental porcelain slurries, which results from the increase of the absolute value of zeta potential of the suspensions. Slurries with pseudo-plastic behavior are highly desirable in controlling the shape of the extrudate during solid freeform fabrication. With the functionalized material, a variety of bio-artifacts beneficial to body health can be built by using selective slurry extrusion machine.