Development of a non-titration potentiometric method for the determination of acidity in vinegar.

The acidity of a solution is associated with the concentration of Brønsted acids. This work proposes a new non-titrimetric potentiometric method using citrate buffer for the determination of vinegar acidity. The difference between the pH values before and after the addition of a diluted vinegar sample to 10 mmol L-1 citrate buffer (pH 5.5) was related to the acetic acid concentration. The dynamic range of the quadratic analytical curve was from 3.5 to 20 mmol L-1 (R2 = 0.998). The repeatability was 0.8% for acetic acid at 0.01 mol L-1. Comparison with the conventional titration method showed an error between 0.7% and 4.64% (n = 9) for analysis of commercial vinegar samples The behaviour of the system could be explained using the buffering function.

Selective capillary coating materials for in-tube solid-phase microextraction coupled to liquid chromatography to determine drugs and biomarkers in biological samples: a review.

In-tube solid-phase microextraction (in-tube SPME) coupled with high performance liquid chromatography (HPLC) or liquid chromatography coupled to mass spectrometry (LC-MS) successfully determines drugs or biomarkers in biological samples by direct sample injection or by simple sample treatment. This technique uses a capillary column as extraction device. Several capillaries (wall-coated open tubular, sorbent-packed, porous monolithic rods, or fiber-packed) with unique phases have been developed and evaluated, aiming to improve the efficiency and selectivity of the in-tube SPME-LC technique. This review describes new developments and applications occurred in recent years, and discusses future trends with emphasis on new extraction devices and current technology used for the synthesis of selective sorbents for bioanalysis, such as (i) polypyrrole, (ii) restricted-access materials, (iii) immunosorbents, (iv) molecular imprinting polymers, (v) monolithic polymers, and (vi) bi-functional materials.

Automated determination of rifampicin in plasma samples by in-tube solid-phase microextraction coupled with liquid chromatography.

A sensitive and automated method is described for determination of rifampicin in plasma samples for therapeutic drug monitoring by in-tube solid-phase microextraction coupled with liquid chromatography (in-tube SPME/LC). Important factors in the optimization of in-tube SPME are discussed, such as coating type, sample pH, sample draw/eject volume, number of draw/eject cycles, and draw/eject flow rate. Analyte pre-concentrated in the polyethylene glycol phase was directly transferred to the liquid chromatographic column by percolation of the mobile phase, without carryover. The method was linear over the 0.1-100 µg/mL range, with a linear coefficient value (r(2)) of 0.998. The inter-assay precision presented coefficient of variation ≤ 1.7%. The effectiveness and practicability of the proposed method are proven by analysis of plasma samples from ageing patients undergoing therapy with rifampicin.

Polydimethylsiloxane/polypyrrole stir bar sorptive extraction and liquid chromatography (SBSE/LC-UV) analysis of antidepressants in plasma samples.

A new polymeric coating consisting of a dual-phase, polydimethylsiloxane (PDMS) and polypyrrole (PPY) was developed for the stir bar sorptive extraction (SBSE) of antidepressants (mirtazapine, citalopram, paroxetine, duloxetine, fluoxetine and sertraline) from plasma samples, followed by liquid chromatography analysis (SBSE/LC-UV). The extractions were based on both adsorption (PPY) and sorption (PDMS) mechanisms. SBSE variables, such as extraction time, temperature, pH of the matrix, and desorption time were optimized, in order to achieve suitable analytical sensitivity in a short time period. The PDMS/PPY coated stir bar showed high extraction efficiency (sensitivity and selectivity) toward the target analytes. The quantification limits (LOQ) of the SBSE/LC-UV method ranged from 20 ng mL(-1) to 50 ng mL(-1), and the linear range was from LOQ to 500 ng mL(-1), with a determination coefficient higher than 0.99. The inter-day precision of the SBSE/LC-UV method presented a variation coefficient lower than 15%. The efficiency of the SBSE/LC-UV method was proved by analysis of plasma samples from elderly depressed patients.

Determination of amitraz in canine plasma by solid-phase microextraction-gas chromatography with thermionic specific detection.

A simple and rapid analytical method is presented for the determination of amitraz in canine plasma samples using solid-phase microextraction (SPME) and gas chromatography with thermionic specific detection (GC-TSD). The best conditions for the SPME procedure were: direct extraction on a polydimethlysiloxane (PDMS) fiber with 100-microm film thickness; 400 µl of sample plasma matrix modified with 4 ml sodium borate solution (0.01 mol l(-1), pH 6.5); extraction temperature 70 degrees C, with stirring at 2500 rpm for 45 min. The method was linear between 20 and 400 ng ml(-1) with regression coefficients corresponding to 0.998 and coefficient of the variation of the points of the calibration curve lower than 15%. The lowest limit of quantification (LOQ) for amitraz in plasma was 20 ng ml(-1). This LOQ was determined as the lowest concentration on the calibration curve in which the coefficient of variation was lower than 15%. The proposed method was applied to determine amitraz concentrations in canine plasma to look for toxicity after treatment with amitraz in a dipping bath.

Determination of lamotrigine simultaneously with carbamazepine, carbamazepine epoxide, phenytoin, phenobarbital, and primidone in human plasma by SPME-GC-TSD.

A simple and rapid analytical method is presented for the determination of lamotrigine simultaneously with primidone, carbamazepine, carbamazepine epoxide, phenobarbital, and phenytoin in human plasma using solid-phase microextraction (SPME) and gas chromatography with thermionic specific detection. The best conditions for the SPME procedure is established as following: direct extraction on a 65-microm Carbowax-divinylbenzene fiber; 1.0 mL of a sample plasma matrix modified with 15% NaCl and 3 mL of a potassium phosphate buffer (pH 7.0); extraction temperature at 30 degrees C; and stirring at a rate of 2500 rpm for 15 min. The method shows good linearity between 0.05 and 40.0 microg/mL with regression coefficients ranging between 0.9965 and 0.9995 and a coefficient of variation of the points of the calibration curve lower than 10%. The lowest limit of quantitation for the plasma-investigated drugs varies from 0.05 to 0.20 microg/mL, according to the drug. The proposed method is sensitive enough to work into subtherapeutic and therapeutic concentrations, being that it is applied in pharmacokinetic studies and patient routine therapeutic drug monitoring.

Comparison between solid-phase extraction methods for the chromatographic determination of organophosphorus pesticides in water.

A solid-phase microextraction (SPME) procedure has been developed to extract eight organophosphorus pesticides (OPs) in water and the method was compared with a conventional solid phase extraction (SPE) technique. The extracted OPs were analyzed by gas chromatography using thermionic specific detection. Both extraction methods presented linear calibration at least over the concentration range investigated (100 to 1000 ng x mL(-1) for SPE and 1 to 100 ng x mL(-1) for SPME). SPME method presented higher sensitivity than SPE. The quantitation limits were between 0.1 to 1.0 ng x mL(-1) for SPME depending upon the analyte, and 100 ng x mL(-1) for SPE. The precision, as measured by the standard deviations (RSD), were in the range 3.6% to 5.8% for SPME and 2.4% to 9.2% for SPE. Along with the feature of being a solvent - free sampling technique, SPME offers additional benefits due to its high sensitivity, simplicity, and small size sample required (typically: SPE - 500 mL, SPME - 5 mL).

Analytical methods for the determination of alachlor, metolachlor, simazine and atrazine mobility in soils.

A method for the determination of the mobility of the herbicides, alachlor, metolachlor, simazine and atrazine in soil is described. The method is based on the use of soil thin-layer chromatography (TLC) and does not require the use of radiolabelled compounds. Soil on the TLC plate after development was separated into various bands, the material in each band was extracted with solvents and analyzed by gas chromatography.