Aluminium release by coated and uncoated fluid-warming devices.

The use of fluid-warming systems is recommended for infusion rates > 500 ml.h-1 to avoid peri-operative hypothermia. Some fluid-warming devices use disposable aluminium-heated plates for heat transfer, but there is no protective coating to separate the fluid from the heated aluminium surface. It is unknown if this could promote release of aluminium into infusion fluids. We investigated a coated (Fluido compact) and an uncoated (enFlow) fluid-warming device using normal saline or balanced electrolyte solution as infusion fluids, pumped through the heated disposables at flow rates of 2, 4 and 8 ml.min-1 for 60 min each. Aluminium concentrations in the fluid samples were analysed using graphite furnace atomic absorption spectrometry. With saline the coated and uncoated devices yielded aluminium concentrations below the level of quantification (< 128 µg.l-1 ). Similarly, balanced electrolyte solution in the coated device yielded aluminium concentrations < 128 µg.l-1 . However, balanced electrolyte solution in the uncoated device yielded aluminium concentrations of up to 6794 (3465-8002 [1868-7421]) µg.l-1 . Repeating this last study at a flow rate of 2 ml.min-1 resulted in quite high aluminium concentrations when the uncoated device was not heated (~1000 µg.l-1 ) and higher concentrations after the device was heated. We conclude that using uncoated aluminium plates in fluid-warming systems can lead to a risk of administering potentially harmful concentrations of aluminium when balanced crystalloid solutions are used. The mechanism is unclear, but heat is in part involved. Coating for aluminium within medical devices in direct contact with infusion fluids should be recommended.

A 3D morphometric follow-up analysis after frontoorbital advancement in non-syndromic craniosynostosis.

OBJECTIVE: Frontoorbital advancement (FOA) in patients with non-syndromic craniosynostosis mainly addresses the aesthetic and functional correction of the frontoorbital region. To help define the operative strategy and any follow-up assessments after surgical correction, objective parameters describing the critical regions of skull deformity are essential. Based on 3D morphometric analysis, new parameters for the documentation of changes of the frontoorbital bandeau were developed in a prospective study. METHODS AND MATERIALS: In a prospective series, 13 children with non-syndromic craniosynostosis (seven metopic, four unilateral coronal, and two bilateral coronal) treated with frontoorbital advancement, underwent detailed morphometric and volumetric evaluation using a 3D light optical scan system (3D-Shape, Erlangen, Germany). Measurements were obtained preoperatively and at 3, 6 and 12 months postoperatively with newly developed parameters generated by cephalometric analysis software (Onyx Ceph, Image Instruments, Chemnitz, Germany). RESULTS: In most patients, frontoorbital advancement resulted in stable long-term results without growth inhibition and with normalization or improvement of ongoing skull development. The mean frontal angle was 145° and the frontoparietal angle 137-140°. The cephalic index was normalized or markedly improved. Head circumference and head height increased significantly (p = 0.001 and p = 0.002, respectively). These changes were confirmed in all postoperative measurements. CONCLUSION: During the 12-month follow-up period all angle parameters proved to be stable and no major impairment of normal skull growth was observed after FOA. The frontoorbital angle is a useful parameter in evaluating long-term outcome. The frontoparietal angle is important for the stability of the frontoparietal region, in which a certain growth inhibition may be observed postoperatively.

Cerebral oxygenation and hemodynamic measurements during craniosynostosis surgery with near-infrared spectroscopy.

INTRODUCTION: Focal pressure-related changes in brain perfusion and metabolism are discussed in single-suture craniosynostosis and brachycephalic cases (bicoronal synostosis). Raised intracranial pressure levels could be measured in some cases. In order to find possible loco-regional brain tissue changes during plastic surgery, we investigated oxygenation and perfusion parameters using non-invasive near-infrared spectroscopy (NIRS) probes. METHODS: Twenty-two consecutively operated cases (mean age 7 months) with single-suture craniosynostosis were prospectively investigated using a NIRS probe (LEA(©), O2C, white light 500-800 nm, laser NIR). Measurements for oxygen saturation (SO(2)), relative quantity of hemoglobin (rHb), blood flow, and blood flow velocity of the bilateral frontal, temporal, and parietal cortices were taken transosseously (prior to decompression) and epidurally directly after decompression as well as 15 and 30 min after decompression and before closure. RESULTS: Twenty-two patients with scaphocephaly (11), trigonocephaly (6), anterior plagiocephaly (3), and brachycephaly (2) were investigated. SO(2) was improving in all patient subgroups, showing the highest levels in the fronto-temporal region; rHb improved in scaphocephalic, trigonocephalic, and brachycephalic children. Again, the highest values were found not only in the temporal but also in the frontal region and in brachycephalic patients also in the parietal cortex. CONCLUSION: These preliminary results of a new technology for brain tissue oxygenation and blood flow measurements suggest a regional compromise of cortical metabolism and circulation in patients with craniosynostosis.

Fetal MRI of the central nervous system: clinical relevance.

OBJECTIVE: Specific conditions of the mother sometimes reduce the quality of ultrasound. In these cases, fetal magnetic resonance imaging (MRI) can be performed after gestational week (GW) 18. Interpretation of subtle disorders or malformations becomes safe not before GW 23. Clinical development of children with central nervous system (CNS) disorders is not predictable with imaging alone. Statistical evidence and personal experience of the medical team are essential in counseling, but optimized imaging is helpful in being more precise. The value of fetal MRI (fMRI) is evaluated. MATERIALS AND METHODS: Twenty-five pregnant women (30.5 +/- 4.5 years) were investigated by additional fMRI. TECHNIQUE: Breath-hold technique with T2 half-Fourier acquisition single-shot turbo spin-echo and T1 FLASH-2D images in three dimensions with field of view of 350 x 400 mm. All cases have been correlated with postnatal MRI, ultrasound, and clinical follow-up. RESULTS: In all fetuses, diagnostic MRI was performed 3-10 days after ultrasound between GW 22 and 34 (GW 26.1 +/- 3.6). Sedation was not necessary. In eight cases of suspicious ultrasound, fMRI confirmed ultrasound findings. In 13 cases, additional diagnoses or exclusions of suspected findings could be established. Complete revision of diagnosis was realized in four cases. Findings could be confirmed by postnatal MRI in 11 patients. The clinical course was not predictable in cases with ambivalent prognosis. CONCLUSIONS: Prenatal diagnosis of CNS pathologies should result in parental counseling. Sufficient diagnostic information, statistical data, and experience of the involved professionals are essential. These results show that in detecting congenital CNS abnormalities fMRI is superior to ultrasound and should be considered in difficult cases.

[The suicide conference. An instrument for support of involved teams after inpatient suicides]. / Die Suizidkonferenz. Ein Instrument zur Unterstützung betroffener Teams nach Suiziden im stationären Kontext.

This is a report on the authors' experience over two years in developing a new way to deal with patient suicides in a District Psychiatric Hospital. The main aim of the Suicide Counselling Session is to help the involved hospital ward teams to overcome the strain, doubt and psychological burden often caused by the suicide of a patient. The authors describe the institutional conditions and setting in which a Suicide Counselling Session takes place. The method is characterised by a special attitude and the ideas of "Reflecting Team" to bring the involved stress factors into the open.