Two-Dimensional Correlation Spectroscopy (2D-COS) Studies of Solution Mixtures in the Low Frequency Raman Region.

Raman spectra of a series of binary solution mixtures, including chloroform (CHCl3), ethanol (EtOH), and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), were analyzed using the two-dimensional correlation spectroscopic (2D-COS) technique in the low frequency region. Numerous asynchronous cross-peaks ubiquitously appeared in the concentration-dependent Raman spectra of these organic solvent mixtures. The result clearly demonstrated a deviation from ideal solution behavior, reflecting the presence of specific molecular interactions causing a subtle nonlinear spectral intensity response of Raman bands to the concentration changes. Furthermore, the combination of 2D-COS and low frequency Raman spectroscopy was extended to poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] (PHBHx) copolymer solutions in CHCl3-HFIP co-solvents. The results suggest the existence of hydrogen bonding interaction between the PHBHx and HFIP, which is consistent with the previous infrared spectroscopic study of PHBHx solutions.

Unique Surface Enhanced Raman Scattering Substrate for the Study of Arsenic Speciation and Detection.

In this study, a three-dimensional surface enhanced Raman scattering (SERS) substrate comprised of silver coated gold nanorods (Ag/AuNRs) decorated on electrospun polycaprolactone (PCL) fibers has been applied,  for the first time, to quantitative analytical measurements on various arsenic species: p-arsanilic acid ( pAsA), roxarsone (Rox), and arsenate (AsV), with a demonstrated sensitivity below 5 ppb. AsV detection in a solution of common salt ions has been demonstrated, showing the tolerance of the substrate to more complex environments. pAsA adsorption behavior on the substrate surface has been investigated in detail using these unique SERS substrates. Calculations based on density functional theory (DFT) support the spectral observation for pAsA. This substrate also has been shown to serve as a platform for in situ studies of arsenic desorption and reduction. This SERS substrate is potentially an excellent environmental sensor for both fundamental studies and practical applications.

Two-Dimensional Raman Correlation Spectroscopy Study of Poly[(R)-3-hydroxybutyrate- co-(R)-3-hydroxyhexanoate] Copolymers.

Two-dimensional correlation analysis was applied to the time-dependent evolution of Raman spectra during the isothermal crystallization of bioplastic, poly[(R)-3-hydroxybutyrate- co-(R)-3-hydroxyhexanoate] or PHBHx copolymer. Simultaneous Raman measurement of both carbonyl stretching and low-frequency crystalline lattice mode regions made it possible to carry out the highly informative hetero-mode correlation analysis. The crystallization process of PHBHx involves: (1) the early nucleation stage; (2) the primary growth of well-ordered crystals of PHBHx; and (3) the secondary crystal growth phase. The latter stage probably occurs in the inter-lamellar region, with an accompanying reduction of the amorphous component, which occurs most dominantly during the primary crystal growth. The development of a fully formed lamellar structure comprising the 21 helices occurs after the primary growth of crystals. In the later stage, secondary inter lamellar space crystallization occurs after the full formation of packed helices comprising the lamellae.

Observation of Intermolecular Hydrogen Bonding Interactions in Biosynthesized and Biodegradable Poly [(R)-3-hydroxybutyrate- co-(R)-3-hydroxyhexanoate] in Chloroform and 1,1,1,3,3,3-Hexafluoro-2-propanol (HFIP).

In this work, we describe polymer-solvent interactions in biosynthesized and biodegradable poly[(R)-3-hydroxybutyrate- co-(R)-3-hydroxyhexanoate] (PHBHx) and the atactic homopolymer, poly(3-hydroxybutyrate) (a-PHB), which were studied both as neat polymers and in solutions of chloroform and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). Specifically, infrared frequency shifts of the carbonyl band were observed in semi-crystalline PHBHx, but not in a-PHB, because it cannot form the helical conformation required for crystallization. The carbonyl band of PHBHx exhibited the high frequency associated with amorphous structure in chloroform and the lower frequency traditionally attributed to the helical crystalline structure in HFIP. The same results were obtained for a-PHB, demonstrating that the helical structure is not required for a lower frequency carbonyl-stretching mode. It is proposed that the band shift is due to hydrogen bonding between the carbonyl and hydroxyl hydrogen in HFIP. Therefore, the carbonyl frequency observed upon crystallization is most likely due to hydrogen bonding between the carbonyl and methyl hydrogen of the neighboring polymer chain in the crystal lattice as previously suggested.

Artifact Correction in Temperature-Dependent Attenuated Total Reflection Infrared (ATR-IR) Spectra.

A spectral processing method was developed and tested for analyzing temperature-dependent attenuated total reflection infrared (ATR-IR) spectra of aliphatic polyesters. Spectra of a bio-based, biodegradable polymer, 3.9 mol% 3HHx poly[(R)-3-hydroxybutyrate- co-(R)-3-hydroxyhexanoate] (PHBHx), were analyzed and corrected prior to analysis using two-dimensional correlation spectroscopy (2D-COS). Removal of the temperature variation of diamond absorbance, correction of the baseline, ATR correction, and appropriate normalization were key to generating more reliable data. Both the processing steps and order were important. A comparison to differential scanning calorimetry (DSC) analysis indicated that the normalization method should be chosen with caution to avoid unintentional trends and distortions of the crystalline sensitive bands.

Selective and Quantitative Detection of Trace Amounts of Mercury(II) Ion (Hg²âº) and Copper(II) Ion (Cu²âº) Using Surface-Enhanced Raman Scattering (SERS).

We report the development of a surface-enhanced Raman scattering (SERS)-based heavy metal ion sensor targeting the detection of mercury(II) ion (Hg(2+)) and copper(II) ion (Cu(2+)) with high sensitivity and selectivity. To achieve the detection of vibrational-spectroscopically silent heavy metal ions, the SERS substrate composed of gold nanorod (AuNR)-polycaprolactone (PCL) nanocomposite fibers was first functionalized using metal ion-binding ligands. Specifically, 2,5-dimercapto-1,3,4-thiadiazole dimer (di-DMT) and trimercaptotriazine (TMT) were attached to the SERS substrates serving as bridging molecules to capture Hg(2+) and Cu(2+), respectively, from solution. Upon heavy metal ion coordination, changes in the vibrational spectra of the bridging molecules, including variations in the peak-intensity ratios and peak shifts were observed and taken as indicators of the capture of the target ions. With rigorous spectral analysis, the coordination mechanism between the heavy metal ion and the corresponding bridging molecule was investigated. Mercury(II) ion primarily interacts with di-DMT through the cleavage of the disulfide bond, whereas Cu(2+) preferentially interacts with the heterocyclic N atoms in TMT. The specificity of the coordination chemistry provided both di-DMT and TMT with excellent selectivity for the detection of Hg(2+) and Cu(2+) in the presence of other interfering metal ion species. In addition, quantitative analysis of the concentration of the heavy metal ions was achieved through the construction of internal calibration curves using the peak-intensity ratios of 287/387 cm(-1) for Hg(2+) and 1234/973 cm(-1) for Cu(2+).

Immobilization of gold nanorods onto electrospun polycaprolactone fibers via polyelectrolyte decoration--a 3D SERS substrate.

We report the fabrication of a homogeneous and highly dense gold nanorod (AuNR) assembly on electrospun polycaprolactone (PCL) fibers using electrostatic interaction as the driving force. Specifically, decoration of a poly(sodium 4-styrenesulfonate) (PSS) layer onto the AuNRs imposed negative charges on the nanorod surface, and the interactions between PSS and the AuNRs were investigated using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Positive charges on the PCL fibrous substrate were established via polyelectrolyte layer-by-layer deposition, which was investigated using multiple characterization techniques. Driven by the attractive electrostatic interaction, immobilization of AuNRs on the PCL fibers was initiated upon substrate immersion, and the kinetics of the immobilization process were studied using UV-vis spectroscopy. Electron microscopy characterization of the AuNR/PCL nanocomposite fibers reveals a uniform AuNR coating on the fiber surface with the immobilized AuNR density being high enough to provide full surface coverage. By using both 4-mercaptopyridine and Rhodamine 6G as probe molecules, the performance of the AuNR/PCL fibrous mesh as a three-dimensional (3D) surface-enhanced Raman scattering (SERS) substrate was investigated. The nanocomposite fibers allowed detection at concentrations as low as 10(-7) M of the probe molecule in solution and exhibited excellent reproducibility in the SERS measurements. In addition, a comparison between the 3D AuNR/PCL fibrous mesh and a 2D AuNR/PCL film reveals that the enhanced surface area in the 3D substrate effectively improved the SERS performance with a 6-fold increase in the Raman intensity.

Preparation of Multilayer Biodegradable Nanofibers by Triaxial Electrospinning.

A biodegradable, multilayer nanofiber structure has been successfully developed by using a self-designed and fabricated triaxial electrospinning system using gelatin as the sheath and core layers and poly(ε-caprolactone) (PCL) as the middle layer. The triaxial structure was investigated by confocal fluorescence microscopy (CFM) and focused ion beam and field-emission scanning electron microscopy (FIB-FESEM). The ability to fabricate the multilayered nanofibers efficiently with different biodegradable polymers will enable this triaxial electrospinning technique to have wider applications in biotechnology.

AFM-IR: combining atomic force microscopy and infrared spectroscopy for nanoscale chemical characterization.

Polymer and life science applications of a technique that combines atomic force microscopy (AFM) and infrared (IR) spectroscopy to obtain nanoscale IR spectra and images are reviewed. The AFM-IR spectra generated from this technique contain the same information with respect to molecular structure as conventional IR spectroscopy measurements, allowing significant leverage of existing expertise in IR spectroscopy. The AFM-IR technique can be used to acquire IR absorption spectra and absorption images with spatial resolution on the 50 to 100 nm scale, versus the scale of many micrometers or more for conventional IR spectroscopy. In the life sciences, experiments have demonstrated the capacity to perform chemical spectroscopy at the sub-cellular level. Specifically, the AFM-IR technique provides a label-free method for mapping IR-absorbing species in biological materials. On the polymer side, AFM-IR was used to map the IR absorption properties of polymer blends, multilayer films, thin films for active devices such as organic photovoltaics, microdomains in a semicrystalline polyhydroxyalkanoate copolymer, as well as model pharmaceutical blend systems. The ability to obtain spatially resolved IR spectra as well as high-resolution chemical images collected at specific IR wavenumbers was demonstrated. Complementary measurements mapping variations in sample stiffness were also obtained by tracking changes in the cantilever contact resonance frequency. Finally, it was shown that by taking advantage of the ability to arbitrarily control the polarization direction of the IR excitation laser, it is possible to obtain important information regarding molecular orientation in electrospun nanofibers.

Molecular Orientation in Electrospun Poly(vinylidene fluoride) Fibers.

Electrospun poly(vinylidene fluoride) (PVDF) nanofibers were collected on aluminum foil across a 10 mm gap. Scanning electron microscopy (SEM) images showed that fibers in the gap were macroscopically aligned and those off the gap were macroscopically randomly aligned. Polarized Fourier transform infrared (FTIR) spectra and single fiber selected area electron diffraction (SAED) patterns demonstrated that fibers deposited in the gap were highly aligned at the molecular level with the polymer backbones oriented along the fiber axis. SAED patterns of fibers deposited off the gap were also oriented at the molecular level, but the degree of orientation was lower.

Molecular orientation evolution and solvent evaporation during electrospinning of atactic polystyrene using real-time Raman spectroscopy.

Real-time Raman spectroscopy was successfully utilized to monitor solvent evaporation and molecular orientation during electrospinning of atactic polystyrene (a-PS). The use of a binary solvent system of N,N-dimethyl formamide (DMF) and tetrahydrofuran (THF) provided a stable, straight jet during the experiment. The prominent Raman bands centered at 866 cm(-1), 914 cm(-1), and 1004 cm(-1), unique to DMF, THF, and a-PS, respectively, were used to monitor solvent concentration changes along the electrospinning jet for two different a-PS solutions. In addition, the changes in relative intensity for the radial skeletal ring vibration of the aromatic group of a-PS at 623 cm(-1) in two different polarization geometries, ZZ and YY, were monitored for orientation information. This study reports the first quantitative vibrational spectroscopic measurement during the electrospinning process. A significant change in concentration and orientation was observed during the process. The changes are explained in relation to the electrospinning process.

Fiber diameters control osteoblastic cell migration and differentiation in electrospun gelatin.

Defined electrospinning conditions were used to create scaffolds with different fiber diameters to investigate their interactions with osteoblastic MG63 cells. Nonwoven gelatin scaffolds were electrospun with varied fiber diameters to investigate the effect of fiber size and resultant porosity on cell proliferation, viability, migration, and differentiation. The low toxicity solvent acetic acid:ethyl acetate:water ratio and gelatin concentrations were optimized to create small and large diameter fibers. The fiber diameters obtained by this procedure were 110 +/- 40 nm for the small and 600 +/- 110 nm for the large fibers. Cell viability assays showed that MG63 cells grew similarly on both fibers at the early time point (day 3) but preferred the scaffold with large diameter fibers by the later time points (day 5 and day 7). Confocal microscopic imaging showed that MG63 cells migrated poorly (maximum depth of 18 microm) into the scaffold of small diameter fibers, but readily penetrated (maximum depth of 50 microm) into the scaffold of large diameter fibers. Alkaline phosphatase (ALP) assays showed that MG63 cells differentiated on scaffolds made from both diameter fibers. In longer term experiments, MG63 cells differentiated to a greater extent on scaffolds made from small diameter fibers compared to large diameter fibers at days 3 and 7, but the ALP levels were the same for both diameter fibers by day 14. These results indicate that cells can perceive differences in the diameter and resultant pore size of electrospun gelatin fibers and that they process this information to alter their behavior.

Biofunctionalization of electrospun PCL-based scaffolds with perlecan domain IV peptide to create a 3-D pharmacokinetic cancer model.

Because prostate cancer cells metastasize to bone and exhibit osteoblastic features (osteomimicry), the interrelationships between bone-specific microenvironment and prostate cancer cells at sites of bone metastasis are critical to disease progression. In this work the bone marrow microenvironment in vitro was recreated both by tailoring scaffolds physical properties and by functionalizing electrospun polymer fibers with a bioactive peptide derived from domain IV of perlecan heparan sulfate proteoglycan. Electrospun poly (epsilon-caprolactone) (PCL) fibers and PCL/gelatin composite scaffolds were modified covalently with perlecan domain IV (PlnDIV) peptide. The expression of tight junction protein (E-cadherin) and focal adhesion kinase (FAK) phosphorylation on tyrosine 397 also were investigated. The described bioactive motif significantly enhanced adherence and infiltration of the metastatic prostate cancer cells on all modified electrospun substrates by day 5 post-seeding. Cells cultured on PlnDIV-modified matrices organized stress fibers and increased proliferation at statistically significant rates. Additional findings suggest that presence of PlnDIV peptide in the matrix reduced expression of tight junction protein and binding to PlnDIV peptide was accompanied by increased focal adhesion kinase (FAK) phosphorylation on tyrosine 397. We conclude that PlnDIV peptide supports key signaling events leading to proliferation, survival, and migration of C4-2B cancer cells; hence its incorporation into electrospun matrix is a key improvement to create a successful three-dimensional (3-D) pharmacokinetic cancer model.

Three-dimensional culture alters primary cardiac cell phenotype.

The directed formation of complex three-dimensional (3D) tissue architecture is a fundamental goal in tissue engineering and regenerative medicine. The growth of cells in 3D structures is expected to influence cellular phenotype and function, especially relative cell distribution, expression profiles, and responsiveness to exogenous signals; however, relatively few studies have been carried out to examine the effects of 3D reaggregation on cells from critical target organs, like the heart. Accordingly, we cultured primary cardiac ventricular cells in a 3D model system using a serum-free medium to test the hypothesis that expression profiles, multicellular organizational pathways, tissue maturation markers, and responsiveness to hormone stimulation were significantly altered in stable cell populations grown in 3D versus 2D culture. We found that distinct multi-cellular structures formed in 3D in conjunction with changes in mRNA expression profile, up-regulation of endothelial cell migratory pathways, decreases in the expression of fetal genes (Nppa and Ankrd1), and increased sensitivity to tri-iodothyronine stimulation when compared to parallel 2D cultures comprising the same cell populations. These results indicate that the culture of primary cardiac cells in 3D aggregates leads to physiologically relevant alterations in component cell phenotype consistent with cardiac ventricular tissue formation and maturation.

Molecular rearrangement of metal-chelating lipid monolayers upon protein adsorption.

The controlled adsorption of proteins to well-defined monolayers is critical to advances in sensor and nanotechnology applications where selective adsorption of targeted species is of interest. In the studies reported here, we developed vibrational spectroscopic methods to gain molecular insight into the effect of single-site versus multiple-site binding of proteins to metal-chelating monolayers at an air-water interface. Analysis of real-time planar array infrared reflection-absorption spectra revealed that a Cu(II)-chelated DSIDA lipid monolayer (Cu(2+)-DSIDA) was readily disrupted by adsorption of myoglobin as demonstrated by a blue shift of 1.7 cm(-1) in the v(as)(CH(2)) stretching mode and a reduced peak intensity over a period of 5 h. However, a Zn(II)-chelated monolayer was not affected by the adsorption of either protein, suggesting that multisite binding of protein on the Cu(2+)-DSIDA results in monolayer disruption. Further studies demonstrated that in film form, adsorption of myoglobin to the Cu(2+)-DSIDA perturbed the secondary structures of myoglobin, especially the alpha-helical, random structure, and extended structures. However, no distinct change was observed during adsorption of lysozyme. These results demonstrate the utility of these methods for monitoring the molecular rearrangement of both metal-charged lipid monolayers and proteins that occur during adsorption of a protein with a strong affinity for the monolayer.

Microfabricated electrospun collagen membranes for 3-D cancer models and drug screening applications.

Invasive epithelial tumors form from cells that are released from their natural basement membrane and form 3-D structures that interact with each other and with the microenvironment of the stromal tissues around the tumor, which often contains collagen. Cancer cells, growing as monolayers on tissue culture plastic, do not reflect many of the properties of whole tumors. This shortcoming limits their ability to serve as models for testing of pharmacologically active compounds, including those that are being tested as antineoplastics. This work seeks to create new 3-D cellular materials possessing properties similar to those in native tissues surrounding cancers, specifically electrospun micro- and nanofibrous collagen scaffolds that support tumor growth in 3-D. We hypothesize that a 3-D culture system will provide a better replica of tumor growth in a native environment and, thus, better report the bioactivity of antineoplastic agents. In addition, we optimized conditions and identified physical characteristics that support growth of the highly invasive, prostate cancer bone metastatic cell line C4-2B on these matrices for use in anticancer drug studies. The effects of matrix porosity, fiber diameter, elasticity, and surface roughness on growth of cancer cells were evaluated. Data indicates that while cells attach and grow well on both nano- and microfibrous electrospun membranes, the microfibrous membrane represented a better approximation of the tumor microenvironment. It was also observed that C4-2B nonadherent cells migrated through the depth of two electrospun membranes and formed colonies resembling tumors on day 3. An apoptosis study revealed that cells on electrospun substrates were more resistant to both antineoplastic agents, docetaxel (DOC), and camptothecin (CAM) compared to the cells grown on standard collagen-coated tissue culture polystyrene (TCP). Growth, survival, and apoptosis were measured, as well as the differences in the apoptotic capabilities, of the two above-mentioned compounds compared to known clinical performance. We conclude that 3-D electrospun membranes are amenable to high throughput screening for cancer cell susceptibility and combination killing (Banerjee, S.; Hussain, M.; Wang, Z.; Saliganan, A.; Che, M.; Bonfil, D.; Cher, M.; Sarkar, F.H. Cancer Research, 2007, 67 (8), 3818-26).

Evaluation of cross-linking methods for electrospun gelatin on cell growth and viability.

The creation of a tissue engineering scaffold via electrospinning that has minimal toxicity and uses a solvent system composed of solvents with low toxicity and different cross-linking agents was investigated. First, a solvent system of acetic acid/ethyl acetate/water (50:30:20) with gelatin as a solute was evaluated. The optimum system for electrospinning a scaffold with the desired properties resulted from a gelatin concentration of 10 wt %. Several different methods were used to cross-link the electrospun gelatin fibers, including vapor-phase glutaraldehyde, aqueous phase genipin, and glyceraldehyde, as well as reactive oxygen species from a plasma cleaner. Because glutaraldehyde at high concentrations has been shown to be toxic, we explored other cross-linking methods. Using reactive oxygen species from a plasma cleaner is an easy alternative; however, the degradation reaction dominated the cross-linking reaction and the scaffolds degraded after only a few hours in aqueous medium at 37 °C. Glyceraldehyde and genipin were established as good options for cross-linking agents because of the low toxicity of these cross-linkers and the resistance to dissolution of the cross-linked fibers in cell culture medium at 37 °C. MG63 osteoblastic cells were grown on each of the cross-linked scaffolds. A proliferation assay showed that the cells proliferated as well or better on the cross-linked scaffolds than on traditional two-dimensional polystyrene culture plates.

Parallel spectroscopic method for examining dynamic phenomena on the millisecond time scale.

An infrared spectroscopic technique based on planar array infrared (PAIR) spectroscopy has been developed that allows the acquisition of spectra from multiple samples simultaneously. Using this technique, it is possible to acquire spectra over a spectral range of 950-1900 cm(-1) with a temporal resolution of 2.2 ms. The performance of this system was demonstrated by determining the shear-induced orientational response of several low molecular weight liquid crystals. Five different liquid crystals were examined in combination with five different alignment layers, and both primary and secondary screens were demonstrated. Implementation of this high-throughput PAIR technique resulted in a reduction in acquisition time as compared to both step-scan and ultra-rapid-scanning FTIR spectroscopy.

Dynamic infrared study of polyphenylene sulfide using planar array infrared spectroscopy.

Planar array infrared (PA-IR) spectroscopy was used to study polyphenylene sulfide (PPS) at room temperature during the application of a sinusoidal elastic deformation. All of the intensity in the dynamic spectra was contained within the in-phase spectrum, which was expected since the measurements were carried out at room temperature, far below the glass transition temperature. The contributions of chain orientation, sample thinning, and stress-induced band shifts were separated in the dynamic spectra. It was found that the effects of chain orientation and sample thinning canceled each other out. Stress-induced band shifts far below the spectral resolution, on the order of 0.01 cm(-1), were quantified and used to calculate the stress optical coefficients and mode Gruneisen parameters for PPS.

Culture on electrospun polyurethane scaffolds decreases atrial natriuretic peptide expression by cardiomyocytes in vitro.

The function of the mammalian heart depends on the functional alignment of cardiomyocytes, and controlling cell alignment is an important consideration in biomaterial design for cardiac tissue engineering and research. The physical cues that guide functional cell alignment in vitro and the impact of substrate-imposed alignment on cell phenotype, however, are only partially understood. In this report, primary cardiac ventricular cells were grown on electrospun, biodegradable polyurethane (ES-PU) with either aligned or unaligned microfibers. ES-PU scaffolds supported high-density cultures and cell subpopulations remained intact over two weeks in culture. ES-PU cultures contained electrically-coupled cardiomyocytes with connexin-43 localized to points of cell:cell contact. Multi-cellular organization correlated with microfiber orientation and aligned materials yielded highly oriented cardiomyocyte groupings. Atrial natriuretic peptide, a molecular marker that shows decreasing expression during ventricular cell maturation, was significantly lower in cultures grown on ES-PU scaffolds than in those grown on tissue culture polystyrene. Cells grown on aligned ES-PU had significantly lower steady state levels of ANP and constitutively released less ANP over time indicating that scaffold-imposed cell organization resulted in a shift in cell phenotype to a more mature state. We conclude that the physical organization of microfibers in ES-PU scaffolds impacts both multi-cellular architecture and cardiac cell phenotype in vitro.