Cytotoxicity and genotoxicity of bioceramic root canal sealers compared to conventional resin-based sealer.

The aim of this study was to evaluate cytotoxicity and genotoxicity of calcium-silicate based sealers and comparing them with a gold standard-an epoxy-based sealant. Two experimental cell lines were used, gingival fibroblasts (hGF) and monocyte/macrophage peripheral blood cell line (SC). The cytotoxicity (XTT assay) and genotoxicity (comet assay) were evaluated both after 24-h and 48-h incubation. Additionally, after 48-h incubation, the cell apoptosis and cell cycle progression was detected. BioRoot Flow induced a significant decrease in hGF cells viability compared to the negative control groups both after 24-h (p < 0.001) and 48-h incubation (p < 0.01). In group with SC cells, after 24-h incubation significant increase in cells viability was detected for AH Plus Bioceramic Sealer in comparison to negative control (p < 0.05). BioRoot Flow and BioRoot RCS can be considered potentially genotoxic for the hGF cells after 48-h incubation (> 20% DNA damage). BioRoot Flow and BioRoot RCS, may have potential genotoxic effects and induce apoptosis in hGF cells which may irritate periapical tissues, resulting in a delayed healing. The findings of the study would be useful in selection of an appropriate sealant for root canal filling without causing cytotoxicity and genotoxicity.

Corrosion Resistance of Titanium Dental Implant Abutments: Comparative Analysis and Surface Characterization.

Metals subjected to the oral environment are prone to corrosion over time and this can be harmful. Metallic restoration components such as dental subgingival implant abutments are exposed to pH changes and different ions while in contact with saliva. The aim of the study was to evaluate the corrosion resistance of titanium dental implant abutments and to compare and contrast the surface characteristics of these alloys before and after corrosion. The corrosion examination (Ecorr, jcorr, OCP, polarization curve) of two implant abutments (TiDesign EV, Astra Tech, Dentsply, York, PA, USA; Individual Titanium Abutment, Apollo Implants Components, Pabianice, Poland) was performed in 0.9% NaCl and 5% HCl. Moreover, specimens were investigated using SEM-EDS before and after the corrosion test. The value of jcorr in NaCl was higher for Astra (34.2 × 10-8 ± 2.5 × 10-8 A/cm2) than for Apollo (8.8 × 10-8 ± 2.5 × 10-8 A/cm2). Whereas, in HCl, the opposite relationship was observed (Astra 2.9 × 10-4 ± 0.8 × 10-4 A/cm2 and Apollo 62.7 × 10-4 ± 9.3 × 10-4 A/cm2). An average reactive anodic current density in NaCl for Astra amounted up to ~0.2 × 10-5-1.5 × 10-5 A/cm2, while for Apollo-up to ~3.3-9.7 × 10-7 A/cm2. The composition of both alloys after corrosion in NaCl demonstrated some changes: a decrease in the Ti, and Al and an increase in oxygen content. Hence, both alloys after corrosion in HCl demonstrated some minor changes in the elemental composition. Based on the results it can be concluded that: 1. Astra and Apollo abutments revealed good corrosion resistance and a passivation layer on the surface. 2. Apollo abutments exhibited better corrosion resistance in a neutral environment, suggesting that Astra abutments were found to be more resistant to corrosion in an acidic medium.

Evaluation of Physical-Chemical Properties of Contemporary CAD/CAM Materials with Chromatic Transition "Multicolor".

The use of materials for computer-aided design/computer-aided manufacturing (CAD/CAM) has been rapidly increasing in daily practice. However, one of the main issues regarding modern CAD/CAM materials is their aging in the oral environment, which may lead to significant changes in their overall properties. The aim of this study was to compare the flexural strength, water sorption, cross-link density (softening ratio%), surface roughness, and SEM analysis of three modern CAD/CAM "multicolor" composites. Grandio (Grandio disc multicolor-VOCO GmbH, Cuxhaven, Germany), Shofu (Shofu Block HC-Shofu Inc., Kyoto, Japan), and Vita (Vita Enamic multiColor-Vita Zahnfabrik, Bad Sackingen, Germany) were tested in this study. They were prepared in stick-shaped specimens and submitted to different tests after several aging protocols, such as thermocycling and mechanical cycle loading challenge. Further disc-shaped specimens were also created and tested for water sorption, cross-link density, surface roughness, and SEM ultramorphology, before and after storage in an ethanol-based solution. For flexural strength and ultimate tensile strength, Grandio showed the greatest values both at baseline and after aging (p < 0.05). Grandio and Vita Enamic presented the highest modulus of elasticity and the lowest water sorption (p < 0.05). A significant reduction (p < 0.05) in microhardness after ethanol storage (softening ratio%) was observed especially in Shofu. Grandio had the lowest roughness parameters compared to the other tested CAD/CAM materials, while ethanol storage significantly increased the Ra and RSm values in Shofu (p < 0.05). Despite the comparable modulus of elasticity of Vita and Grandio, this latter showed greater flexural strength and ultimate tensile strength both at baseline and after aging. Hence, Grandio and Vita Enamic may be employed for the anterior teeth and for those restorations requiring load-bearing capacity. Conversely, aging seems to affect several properties of Shofu, so its use for permanent restorations should be well-pondered based on the clinical situation.

Micro-CT Evaluation of Microgaps at Implant-Abutment Connection.

The assessment of microgaps at the implant-abutment interface is an important factor that may influence clinical success. Thus, the aim of this study was to evaluate the size of microgaps between prefabricated and customised abutments (Astra Tech, Dentsply, York, PA, USA; Apollo Implants Components, Pabianice, Poland) mounted on a standard implant. The measurement of the microgap was performed using micro-computed tomography (MCT). Due to 15-degree rotation of samples, 24 microsections were obtained. Scans were performed at four levels established at the interface between the abutment and the implant neck. Moreover, the volume of the microgap was evaluated. The size of the microgap at all measured levels varied from 0.1 to 3.7 µm for Astra and from 0.1 to 4.9 µm for Apollo (p > 0.05). Moreover, 90% of the Astra specimens and 70% of the Apollo specimens did not exhibit any microgaps. The highest mean values of microgap size for both groups were detected at the lowest portion of the abutment (p > 0.05). Additionally, the average microgap volume was greater for Apollo than for Astra (p > 0.05). It can be concluded that most samples did not exhibit any microgaps. Furthermore, the linear and volumetric dimensions of microgaps observed at the interface between Apollo or Astra abutments and Astra implants were comparable. Additionally, all tested components presented microgaps (if any) that were clinically acceptable. However, the microgap size of the Apollo abutment was higher and more variable than that of the Astra one.

A Micro-CT Analysis of Initial and Long-Term Pores Volume and Porosity of Bioactive Endodontic Sealers.

The evaluation of the porosities within the interface of root canals obturated with endodontics materials is extremely important for the long-term success of endodontic treatments. The aim of this study was to compare initial and long-term volume of pores (total, open, closed) and porosity (total, regional) of three bioactive endodontic sealers: GuttaFlow Bioseal, Total Fill BC Sealer, and BioRoot RCS. Root canals were obturated with three "bioactive" sealers using the single-cone technique. The volume of open and closed pores and porosity were calculated using a micro-computed tomography (MCT) method. The measurements were performed after 7 days (initial) and after 6 months (long-term) of incubation. Statistical significance was considered at p < 0.05. The total volume of pores remained unchanged after the 6-month storage. GuttaFlow Bioseal exhibited significantly higher long-term volume in open pores than Total Fill BC Sealer. The total porosity in all the tested sealers presented no statistically significant change after the 6-month storage, except for BioRoot RCS. The total porosity values of this latter material significantly increased after long-term incubation, especially in the apical region. In conclusion, the use of bioactive sealers with excessive tendency to create porosities both in shorth- and long-term periods of storage may compromise the long-term success of endodontic treatments.

The Assessment of Quality of the Root Canal Filling and the Number of Visits Needed for Completing Primary Root Canal Treatment by Operators with Different Experience.

The main goal of root canal treatment (RCT) is to eradicate or essentially diminish the microbial population within the root canal system and to prevent reinfection by a proper chemo-mechanical preparation and hermetic final obturation of the root canal space. The aim of this study was to assess the quality of the root canal filling and the number of visits needed for completing RCT by operators with different experience, including dentistry students (4th and 5th year), general dental practitioners (GDPs), and endodontists. Data from medical records of 798 patients were analyzed, obtaining 900 teeth and 1773 obturated canals according to the inclusion and exclusion criteria. A similar number of teeth was assessed in each group in terms of density and length of root canal filling and number of visits. The larger number of visits and the lower quality of treatment was observed for 4th year students than for other groups (p < 0.05); in contrast, the endodontists needed the lowest number of visits to complete RCT and more often overfilled teeth than other operator groups (p < 0.05). Interestingly, no statistical difference in quality of root canal filling was noted between 5th year students, GPDs and endodontists. The treatment of lower teeth demanded statistically more visits than that of upper teeth (p < 0.05). The results of the study emphasize that most of the root canal filling performed by operators was considered adequate, regardless of tooth type, files used and number of visits.

Complicated Crown Fracture of Permanent Incisors: A Conservative Treatment Case Report and a Narrative Review.

Dental trauma may have a severe impact on the social and psychological wellbeing of a patient. Most cases of dental injuries involve anterior teeth, especially the maxillary upper incisors. Crown fractures, with or without pulp exposure, are the most common trauma in permanent dentition. There are many methods of management, in which the initial state of the pulp, the time since the injury, and the presence of an accompanying injury play a key role. This case report aimed at showing a possible conservative treatment after complicated tooth fracture that consisted of partial pulpotomy followed by adhesive reattachment of the tooth fragment using a technique based on heated resin composite. Such a specific procedure represents a conservative approach to traumatic coronal lesions, providing a suitable opportunity to maintain the tooth vitality, aesthetics, and function. Indeed, reattachment of tooth fragment using a composite/adhesive is a simple technique to achieve excellent results in terms of aesthetic and function.

Effect of Collagen Crosslinkers on Dentin Bond Strength of Adhesive Systems: A Systematic Review and Meta-Analysis.

This study aimed to identify the role of crosslinking agents in the resin-dentin bond strength (BS) when used as modifiers in adhesives or pretreatments to the dentin surface through a systematic review and meta-analysis. This paper was conducted according to the directions of the PRISMA 2020 statement. The research question of this review was: "Would the use of crosslinkers agents improve the BS of resin-based materials to dentin?" The literature search was conducted in the following databases: Embase, PubMed, Scielo, Scopus, and Web of Science. Manuscripts that reported the effect on the BS after the use of crosslinking agents were included. The meta-analyses were performed using Review Manager v5.4.1. The comparisons were performed by comparing the standardized mean difference between the BS values obtained using the crosslinker agent or the control group. The subgroup comparisons were performed based on the adhesive strategy used (total-etch or self-etch). The immediate and long-term data were analyzed separately. A total of 50 articles were included in the qualitative analysis, while 45 articles were considered for the quantitative analysis. The meta-analysis suggested that pretreatment with epigallocatechin-3-gallate (EGCG), carbodiimide, ethylenediaminetetraacetic acid (EDTA), glutaraldehyde, and riboflavin crosslinking agents improved the long-term BS of resin composites to dentin (p ≤ 0.02). On the other hand, the use of proanthocyanidins as a pretreatment improved both the immediate and long-term BS values (p ≤ 0.02). When incorporated within the adhesive formulation, only glutaraldehyde, riboflavin, and EGCG improved the long-term BS to dentin. It could be concluded that the application of different crosslinking agents such as carbodiimide, EDTA, glutaraldehyde, riboflavin, and EGCG improved the long-term BS of adhesive systems to dentin. This effect was observed when these crosslinkers were used as a separate step and when incorporated within the formulation of the adhesive system.

Shaping Ability of ProTaper Next, Hyflex CM, and V-Taper 2H Nickel-Titanium Files in Mandibular Molars: A Micro-computed Tomographic Study.

Introduction: Although micro-computed tomography (MCT) evaluation of the shaping ability of ProTaper Next (PTN) and Hyflex CM (HCM) files has been reported, to our knowledge, no study has assessed the performance of V-Taper 2H (VT) files. The aim of this study was to evaluate and compare the shaping ability of PTN, HCM, and VT systems in the mesial canals of mandibular molars using MCT. Methods and Materials: Thirty extracted first and second mandibular molars were scanned using MCT and randomly assigned to HCM, PTN, and VT groups. Images obtained before and after preparation were evaluated for the increase in the root canal volume, untouched surface area, and amount of accumulated hard tissue debris. One-way analysis of variance (ANOVA) and Kruskal-Wallis test were used to compare the variables in the groups (α=5%). Results: There were no statistically significant between-group differences in the postoperative measurements (P>0.05). The canal volume increased in all three groups: PTN (73.84%), VT (73.48%), and HCM (49.29%). The largest and smallest untouched areas were observed in the PTN (41.37%) and VT (30.85%) groups, respectively (P>0.05). The debris formed during canal preparation was 1.84%, 2.16%, and 2.42% in the VT, PTN, and HCM groups, respectively (P>0.05). Conclusions: Based on our in vitro study, the PTN, HCM, and VT systems showed similar shaping abilities. None of the tested canals were completely free from debris, while the untouched surface area was considerably large. The VT system had the most favorable results with the smallest untouched surface area and least debris were. We would recommend further trials to endorse these findings.

Evaluation of Size and Location of a Mental Foramen in the Polish Population Using Cone-Beam Computed Tomography.

INTRODUCTION: The mental foramen (MF) is a bilateral opening localized on an anterior surface of the mandible. A precise location as well as well-defined shape, size, and number of the MF is crucial for different clinical dental procedures. The aim of this study was to determine a size and location of the MF in relation to the lower teeth using the cone-beam computed tomography (CBCT) study. MATERIAL AND METHODS: In a group of 201 patients (106 males and 95 females) the CBCT images were performed using the GX CB-500 device (Gendex, USA). RESULTS: No significant differences in values of the horizontal (H) and vertical (V) diameters as well as the H:V ratio on both sides in relation to the age of participants were found. In males both average values of a horizontal diameter (p=0.031) and vertical diameter (p=0.001) were significantly higher on the right side than in the female subgroup, whereas on the left side only an average value of a vertical diameter was significantly higher in men (p=0.006) in comparison to women. Moreover, the H:V ratio was significantly lower in males on the left side (p=0.032). There were no significant relationships between age and gender of the patients (p>0.05) and the type of mental foramen on the right and left sides. CONCLUSIONS: The application of the CBCT study enabled a precise determination of the shape, size, and position of the mental foramen in relation to the neighboring anatomical structures on a representative group of the Polish patients. The results obtained may contribute to guidelines for dental procedures including anesthesia of the mental nerve and endodontic, implantology, and dental surgery with regard to the location of mental foramen depending on the sex and age of patients.

The influence of the manufacturing process of rotary files on the shaping of L-shaped canals.

BACKGROUND: The nickel-titanium alloy used in the production of nickel-titanium files contains approx. 56% nickel and 44% titanium by weight. To improve the properties of nickel-titanium files, the manufacturers introduce some innovations in the production process. Their purpose is primarily to decrease the stiffness of the instruments while increasing the resistance to cyclic fatigue, which reduces the risk of file separation. One of the most popular processes is the heat treatment of the nickel-titanium alloy. OBJECTIVES: The aim of the research was to determine the influence of the manufacturing process of rotary files on the shaping of L-shaped canals. MATERIAL AND METHODS: Fifty L-shaped resin canals were instrumented (10/group) with ProTaper Universal ®, ProTaper Next®, Hyflex CM®, Hyflex EDM®, or WaveOne Gold® files, with the same apical size of 25. Each L-shaped resin canal was photographed both before and after instrumentation. Differences between the change of the working length and apical transportation were analyzed statistically. RESULTS: The smallest mean loss of the working length was observed after instrumentation with Hyflex CM files. Statistically significant differences in the working length were found between ProTaper Universal and Hyflex CM (p = 0.0032), ProTaper Universal and Hyflex EDM (p = 0.021), and ProTaper Universal and WaveOne Gold (p = 0.0112) files. The lowest apical transportation was noted in the case of WaveOne Gold files. In terms of apical transportation, statistically significant differences were observed between ProTaper Universal and WaveOne Gold files (p = 0.0254). Shaping Lshaped canals with the ProTaper Universal file system resulted in the greatest changes in the working length (x = 0.35 mm) and apical transportation (x = 0.034 mm). CONCLUSIONS: The study, with its limitations, shows that in the files whose nickel-titanium alloy was subjected to a thermal treatment process, a smaller loss of the working length and lower values of apical transportation were observed.

The assessment of accessory mental foramen in a selected polish population: a CBCT study.

BACKGROUND: Accessory mental foramen (AMF) is a rare anatomical variation. When accessory mental foramen is present, the nerves and vessels that go through the mental foramen (MF) must follow alternative courses and special care must be taken during dental treatment planning. The purpose of this study was to evaluate the occurrence and the location of AMF in a selected Polish population using cone-beam computed tomography (CBCT). METHODS: Two hundred CBCT (105 males and 95 females) examinations were evaluated for the presence of AMFs. The location and side of AMFs were reported. The mean distance between MF and AMF was also calculated. The vertical size of MF on the side with and without AMF was measured. The obtained variables were statistically analyzed. RESULTS: AMFs were observed in 7% of the patients. There was no statistically significant difference between the appearance of AMF and sex (p > 0.05). We found no significant difference in the vertical size of MF between individuals with and without AMFs (p < 0.05). CONCLUSION: Twenty-eight AMFs (7%) were observed from 400 sides of 200 patients. AMFs occurred more often in males (18 AMFs) than in females (10 AMFs). Twenty AMFs (71.4%) were located anteriorly, and eight (28.6%) - posteriorly. Fifteen AMFs (53.6%) were on the right side and thirteen (46.4%) - on the left.