Broad-class volatile organic compounds (VOCs) detection via polyaniline/zinc oxide (PANI/ZnO) composite materials as gas sensor application.

Metal-oxide doped conductive polymers have been investigated as sensors in the field of gas-sensing. Recent developments have highlighted the role of intrinsically conductive polymers, that have reportedly offered high surface response towards the detection of volatile organic compounds (VOCs). In this work, we optimize the development of gas-sensors made of Polyaniline/Zinc oxide (PANI/ZnO) composite, capable of detecting a varied class of VOCs such as, ammonia, acetone, formaldehyde, methanol, and ethanol. The conductivity of these sensors is evaluated at room temperature and are investigated until saturation. In addition to the final application, this work also focusses on the synthesis strategies to achieve an 'optimal' matrix-to-additive ratio, such that superior chemical response is paralleled with mechanical robustness for PANI based sensors. The PANI/ZnO composites are casted into sensors bearing different additive ratios, via a drop-casting method and the same is evaluated for its formability and mechanical behavior. Physio-chemical characterization was performed using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), and Energy Dispersive X-ray Analysis (EDX) and we report on an exceptional selectivity for ammonia with an average sensor response of 3496.67 mV by all the sensors, when fabricated using different matrix-additive ratios. This result is superior to what is observed for Pure- PANI sensors that were selective only to methanol and ethanol. The addition of ZnO in the smallest fraction, already offers a broader range of selectivity, e.g., PANI/ZnO 90:10 sensor was selective to formaldehyde as assessed using pattern recognition.

Metal Oxide Nanoparticles: Review of Synthesis, Characterization and Biological Effects.

In the last few years, the progress made in the field of nanotechnology has allowed researchers to develop and synthesize nanosized materials with unique physicochemical characteristics, suitable for various biomedical applications. Amongst these nanomaterials, metal oxide nanoparticles (MONPs) have gained increasing interest due to their excellent properties, which to a great extent differ from their bulk counterpart. However, despite such positive advantages, a substantial body of literature reports on their cytotoxic effects, which are directly correlated to the nanoparticles' physicochemical properties, therefore, better control over the synthetic parameters will not only lead to favorable surface characteristics but may also increase biocompatibility and consequently lower cytotoxicity. Taking into consideration the enormous biomedical potential of MONPs, the present review will discuss the most recent developments in this field referring mainly to synthesis methods, physical and chemical characterization and biological effects, including the pro-regenerative and antitumor potentials as well as antibacterial activity. Moreover, the last section of the review will tackle the pressing issue of the toxic effects of MONPs on various tissues/organs and cell lines.

Production of a novel poly(ɛ-caprolactone)-methylcellulose electrospun wound dressing by incorporating bioactive glass and Manuka honey.

Wound dressings produced by electrospinning exhibit a fibrous structure close to the one of the extracellular matrix of the skin. In this article, electrospinning was used to fabricate fiber mats based on the well-known biopolymers poly(ɛ-caprolactone) (PCL) and methylcellulose (MC) using benign solvents. The blend fiber mats were cross-linked using Manuka honey and additionally used as a biodegradable platform to deliver bioactive glass particles. It was hypothesized that a dual therapeutic effect can be achieved by combining Manuka honey and bioactive glass. Morphological and chemical examinations confirmed the successful production of submicrometric PCL-MC fiber mats containing Manuka honey and bioactive glass particles. The multifunctional fiber mats exhibited improved wettability and suitable mechanical properties (ultimate tensile strength of 3-5 MPa). By performing dissolution tests using simulated body fluid, the improved bioactivity of the fiber mats by the addition of bioactive glass was confirmed. Additionally, cell biology tests using human dermal fibroblasts and human keratinocytes-like HaCaT cells showed the potential of the fabricated composite fiber mats to be used as wound dressing, specially due to the ability to support wound closure influenced by the presence of bioactive glass. Moreover, based on the results of the antibacterial tests, it is apparent that an optimization of the electrospun fiber mats is required to develop suitable wound dressing for the treatment of infected wounds.