Influence of water hardness on zinc toxicity in Daphnia magna.

Zinc is an essential trace metal required for the maintenance of multiple physiological functions. Due to this, organisms can experience both zinc deficiency and toxicity. Hardness is recognized as one of the main modifying physiochemical factors regulating zinc bioavailability. Therefore, the present study analyzed the effect of hardness on zinc toxicity using Daphnia magna. Endpoint parameters were acute-toxicity, development, reproduction, and expression data for genes involved in metal regulation and oxidative stress. In addition, the temporal expression profiles of genes during the initiation of reproduction and molting were investigated. Water hardness influenced the survival in response to exposures to zinc. A zinc concentration of 50 µg/l in soft water (50 mg CaCO3 /L) caused 73% mortality after 96 h exposure, whereas the same zinc concentration in the hardest water did not cause any significant mortality. Moreover, increasing water hardness from 100 to 200 mg CaCO3 /L resulted in a reduced number of offspring. Fecundity was higher at first brood for groups exposed to higher Zn concentrations. The survival data were used to assess the precision of the bioavailability models (Bio-met) and the geochemical model (Visual MINTEQ). As the Bio-met risk predictions overestimated the Zn toxicity, a competition-based model to describe the effects of hardness on zinc toxicity is proposed. This approach can be used to minimize differences in setting environmental quality standards. Moreover, gene expression data showed that using the toxicogenomic approach was more sensitive than the physiological endpoints. Therefore, data presented in the study can be used to improve risk assessment for zinc toxicity.

Transcriptional responses of zebrafish to complex metal mixtures in laboratory studies overestimates the responses observed with environmental water.

Metals released into the environment continue to be of concern for human health. However, risk assessment of metal exposure is often based on total metal levels and usually does not take bioavailability data, metal speciation or matrix effects into consideration. The continued development of biological endpoint analyses are therefore of high importance for improved eco-toxicological risk analyses. While there is an on-going debate concerning synergistic or additive effects of low-level mixed exposures there is little environmental data confirming the observations obtained from laboratory experiments. In the present study we utilized qRT-PCR analysis to identify key metal response genes to develop a method for biomonitoring and risk-assessment of metal pollution. The gene expression patterns were determined for juvenile zebrafish exposed to waters from sites down-stream of a closed mining operation. Genes representing different physiological processes including stress response, inflammation, apoptosis, drug metabolism, ion channels and receptors, and genotoxicity were analyzed. The gene expression patterns of zebrafish exposed to laboratory prepared metal mixes were compared to the patterns obtained with fish exposed to the environmental samples with the same metal composition and concentrations. Exposure to environmental samples resulted in fewer alterations in gene expression compared to laboratory mixes. A biotic ligand model (BLM) was used to approximate the bioavailability of the metals in the environmental setting. However, the BLM results were not in agreement with the experimental data, suggesting that the BLM may be overestimating the risk in the environment. The present study therefore supports the inclusion of site-specific biological analyses to complement the present chemical based assays used for environmental risk-assessment.

Comparative Analysis of Stress Induced Gene Expression in Caenorhabditis elegans following Exposure to Environmental and Lab Reconstituted Complex Metal Mixture.

Metals are essential for many physiological processes and are ubiquitously present in the environment. However, high metal concentrations can be harmful to organisms and lead to physiological stress and diseases. The accumulation of transition metals in the environment due to either natural processes or anthropogenic activities such as mining results in the contamination of water and soil environments. The present study used Caenorhabditis elegans to evaluate gene expression as an indicator of physiological response, following exposure to water collected from three different locations downstream of a Swedish mining site and a lab reconstituted metal mixture. Our results indicated that the reconstituted metal mixture exerted a direct stress response in C. elegans whereas the environmental waters elicited either a diminished or abrogated response. This suggests that it is not sufficient to use the biological effects observed from laboratory mixtures to extrapolate the effects observed in complex aquatic environments and apply this to risk assessment and intervention.

Toxicity and accumulation of trinitrotoluene (TNT) and its metabolites in Atlantic salmon alevins exposed to an industrially polluted water.

A pond in an industrial area in Sweden was selected to study adverse effects on salmon alevins from 2,4,6-trinitrotoluene (TNT)-contaminated water. Chemical screening revealed heavy contamination of TNT and its degradation products, 2-amino-4,6-dinitrotoluene (2-ADNT) and 4-amino-2,6-dinitrotoluene (4-ADNT), ranging from 0.05 to 230 g/kg in the sediment (dry weight) within the water system. Pond water contained 3 mg/L TNT. A dilution series of pond water mixed with tap water revealed increased death frequency in alevins down to fivefold dilution (approximate 0.4 mg TNT/L). Uptake was concentration dependent, reaching 7, 9, and 22 µg/g tissue for TNT, 2-ADNT, and 4-ADNT at the highest test concentration. A time-dependent uptake of TNT and its degradation products was found at a water concentration of 0.08 mg TNT/L. Degradation products of TNT showed a more efficient uptake compared to native TNT, and accumulation of 4-ADNT was more pronounced during the late phase of the 40-d exposure study. Bioconcentration factors (BCF) (0.34, 52, and 134 ml/g for TNT, 2-ADNT, and 4-ADNT, respectively) demonstrated a significant uptake of the metabolite 4-ADNT in alevin tissue. Disturbed physiological conditions and delayed development in alevins were not studied, but may not be excluded even at 125-fold diluted pond water (0.016 mg TNT/L). BCF data indicated that bioaccumulation of TNT metabolites need to be considered in TNT chronic toxicity. Fish species and age differences in the accumulation of TNT metabolites need to be further studied.

Arsenic chemical species-dependent genotoxic potential in water extracts from two CCA-contaminated soils measured by DNA-repair deficient CHO-cells.

Two soils with similar contamination levels from wood preservatives containing Chromium (Cr), Copper (Cu) and Arsenic (As) (CCA), were assessed for their general toxicity and genotoxicity. A set of water-based extraction methods, including pressurized liquid extraction (PLE), and batch leaching in milli-Q water and a weak CaCl(2)-solution, was used to produce soil extracts containing available fractions of contaminants. In addition, to obtain indications of the contaminants' bioavailability and toxic potential the genotoxicity of the extracts was estimated by testing their ability to inhibit the growth of wildtype Chinese hamster ovary cells (CHO-cells) and three genetically modified phenotypes that are deficient in different DNA-repair mechanisms. Total extractable arsenic concentrations in the extracts were comparable between the sites. However, the genotoxic potential was clearly higher in soil R extracts. The differences in genotoxic responses were related to differences in inorganic arsenic speciation. The ratio of trivalent arsenic (As(III)) to pentavalent arsenic (As(V)) was higher in all soil extracts from soil R, regardless of the leaching method used. The results of the various combinations of soil extraction techniques and assays using the CHO-cell lines reflected important differences in arsenic speciation in the two soils and possible synergistic effects in CCA-related exposure. They also indicate that speciation and combinatory effects are factors that should be taken into account when assessing risks at former wood impregnation sites contaminated by CCA-agents.

Impact of water saturation level on arsenic and metal mobility in the Fe-amended soil.

The impact of water saturation level (oxidizing-reducing environment) on As and metal solubility in chromium, copper, arsenic (CCA)-contaminated soil amended with Fe-containing materials was studied. The soil was mixed with 0.1 and 1 wt% of iron grit (Fe(0)) and 1, 7 and 15 wt% of oxygen scarfing granulate (OSG, a by-product of steel processing). Solubility of As and metals was evaluated by a batch leaching test and analysis of soil pore water. Soil saturation with water greatly increased As solubility in the untreated as well as in the Fe-amended soil. This was related to the reductive dissolution of Fe oxides and increased concentration of As(III) species. Fe amendments showed As reducing capacity under both oxic and anoxic conditions. The cytotoxicity of the soil pore water correlated with the concentration of As(III). The Fe-treatments as well as water saturation of soil were less significant for the solubility of Cu, Cr and Zn than for As. The batch leaching test used for waste characterization substantially underestimated As solubility that could occur under water-saturated (anaerobic) conditions. In the case of soil landfilling, other techniques than Fe-stabilization of As containing soil should be considered.

Techniques for the stabilization and assessment of treated copper-, chromium-, and arsenic-contaminated soil.

Remediation mainly based on excavation and burial of the contaminated soil is impractical with regard to the large numbers of sites identified as being in need of remediation. Therefore, alternative methods are needed for brownfield remediation. This study was conducted to assess a chemical stabilization procedure of CCA-contaminated soil using iron (Fe)-containing blaster sand (BS) or oxygen-scarfing granulate (OSG). The stabilization technique was assessed with regard to the feasibility of mixing ameliorants at an industrial scale and the efficiency of the stabilization under different redox conditions. The stability was investigated under natural conditions in 1-m3 lysimeters in a field experiment, and the effect of redox conditions was assessed in a laboratory experiment (10 L). The treatments with high additions of ameliorant (8% and 17%) were more successful in both the laboratory and field experiments, even though there was enough Fe on a stochiometric basis even at the lowest addition rates (0.1% and 1%). The particle size of the Fe and the mixing influenced the stabilization efficiency. The development of anaerobic conditions, simulated by water saturation, increases the fraction of arsenic (AsIII) and, consequently, As mobility. The use of high concentrations of OSG under aerobic conditions increased the concentrations of nickel (Ni) and copper (Cu) in the pore water. However, under anaerobic conditions, it decreased the As leaching compared with the untreated soil, and Ni and Cu leaching was not critical. The final destination of the treated soil should govern the amendment choice, that is, an OSG concentration of approximately 10% may be suitable if the soil is to be landfilled under anaerobic conditions. Alternatively, the soil mixed with 1% BS could be kept under aerobic conditions in a landfill cover or in situ at a brownfield site. In addition, the treatment with BS appeared to produce better effects in the long term than treatment with OSG.

Environmental hazard screening of a metal-polluted site using pressurized liquid extraction and two in vitro bioassays.

Rapid screening methods can improve the cost effectiveness, throughput, and quality of risk assessments of contaminated sites. In the present case study, the objective was to evaluate a combination of pressurized liquid extraction and 2 in vitro bioassays for the hazard assessment of surface soil sampled from 46 points across a pyrotechnical industrial site. Pressurized liquid extraction was used to rapidly produce soil-water extracts compatible with 2 high-capacity bioassays. Hazard assessment using combined toxicological and chemical screening revealed zones with relatively high potential risks of metal pollution. Multivariate data analysis provided indications that significant inhibition in the bioassays was correlated with levels of metals in the extracts, suggesting an elevated toxic potential from certain metals. Low pH and high concentrations of dissolved organic carbon were associated with increased cytotoxicity of extracts, indicating that these factors influence metal bioavailability. The cytotoxicity observed was more strongly correlated to metal concentrations in the extracts than in the soil, suggesting that measurements of total metal concentrations in soils do not provide good indications of the soil's potential toxicity.

Improving soil investigations at brownfield sites using a flexible work strategy and screening methods inspired by the US Environmental Protection Agency's triad approach.

Investigations of polluted brownfield sites and sample analyses are expensive, and the resulting data are often of poor quality. Efforts are needed, therefore, to improve the methods used in investigations of brownfield sites to both reduce costs and improve the quality of the results. One approach that could be useful for both of these purposes is the triad strategy, developed by the US Environmental Protection Agency, in which managing uncertainty is a central feature. In the investigations reported here, a field study was conducted to identify possible ways in which uncertainties could be managed in practice. One example considered involves optimizing the uncertainty by adjusting the sizes of samples and the efforts expended in analytical work according to the specific aims of the project. In addition, the potential utility of several toxicity assessment methods for screening sites was evaluated. As well as presenting the results of these assessments, in this contribution we discuss ways in which a flexible work strategy and screening methods inspired of the triad philosophy could be incorporated into the Swedish approach to remediate brownfield sites. A tiered approach taking advantage of field and screening methods is proposed to assess brownfield sites focusing on the response and acceptable uncertainty that are required for the task.

Field trials to assess the use of iron-bearing industrial by-products for stabilisation of chromated copper arsenate-contaminated soil.

Two industrial by-products with high iron contents were tested for their effectiveness in the stabilisation of arsenic and trace metals in chromated copper arsenate (CCA)-contaminated soil. Steel abrasive (SA; 97% Fe(0)) and oxygen scarfing granulate (OSG; 69% Fe(3)O(4)) were applied at levels of 1% and 8% (w/w) respectively to two soils with different organic matter contents. Field lysimeter measurements indicated that SA and OSG treatments decreased the arsenic concentration in pore water by 68% and 92%, respectively, for the soil with low organic matter content, and by about 30% in pore water of soil with high organic matter content. At pH < or =6, the amended soil with low organic content contained elevated levels of manganese and nickel in their pore water, which were sufficient to induce cytotoxic effects in L-929 mouse fibroblast cells. The industrial by-products have significant potential for soil amendment at field-scale, but caution is required because of the potential release of their chemical contaminants and their reduced capacity for sorption of arsenic in organic-rich soils.