GWAS for the identification of introgressed candidate genes of Sinapis alba with increased branching numbers in backcross lines of the allohexaploid Brassica.

Plant architecture is a crucial determinant of crop yield. The number of primary (PB) and secondary branches (SB) is particularly significant in shaping the architecture of Indian mustard. In this study, we analyzed a panel of 86 backcross introgression lines (BCILs) derived from the first stable allohexaploid Brassicas with 170 Sinapis alba genome-specific SSR markers to identify associated markers with higher PB and SB through association mapping. The structure analysis revealed three subpopulations, i.e., P1, P2, and P3, in the association panel containing a total of 11, 33, and 42 BCILs, respectively. We identified five novel SSR markers linked to higher PB and SB. Subsequently, we explored the 20 kb up- and downstream regions of these SSR markers to predict candidate genes for improved branching and annotated them through BLASTN. As a result, we predicted 47 complete genes within the 40 kb regions of all trait-linked markers, among which 35 were identified as candidate genes for higher PB and SB numbers in BCILs. These candidate genes were orthologous to ANT, RAMOSUS, RAX, MAX, MP, SEU, REV, etc., branching genes. The remaining 12 genes were annotated for additional roles using BLASTP with protein databases. This study identified five novel S. alba genome-specific SSR markers associated with increased PB and SB, as well as 35 candidate genes contributing to plant architecture through improved branching numbers. To the best of our knowledge, this is the first report of introgressive genes for higher branching numbers in B. juncea from S. alba.

Sensor based precise nitrogen application augmented productivity and profitability of mustard (Brassica juncea L.).

Unremitting decline in crop productivity and nutrient recovery are resulted due to dearth of need based fertilizer recommendation over blanket application apart from nitrogen pollution in several means. An advance nutrient management tactic, GreenSeeker (GS) has developed and used in many field crops following the principle of four "R" (right source, right amount at right time, and place) nutrients stewardship technologies. But no studies have been conducted for evaluation of GS in mustard for improving productivity, profitability and nutrient use efficiency (NUE) while minimizing environmental risks. With this objective, a study was planned to conduct an experiment in rabi season of 2021-22 and 2022-23 to assess optical sensor based nitrogen management in mustard over blanket recommendation. The experiment was comprised of ten N treatments including control in randomized block design in triplicates. Research findings indicated that application of GreenSeeker based N significantly improved all growth traits and yield parameters in Brassica juncea L. Per cent enhancement in seed yield, net monetary returns and benefit-cost ratio was higher as 19.3 and 64.5%, 125.1 & 36.2% and 58.8 & 24.4%, respectively under GS based multi split N application over RDF and control. Further, real time N management with GS acquired higher crop production efficiency (CPE) (19.9 kg/day) with lesser cost/kg production (Rs 15.7/kg). Split application of N using GS increased oil yield by 79.9 and 26% over control and recommended dose of fertilizer (RDF) with maximum oil content (42.3%), and increases soil organic carbon (SOC) content by 16.1% from its initial value. Moreover, GS crop sensor could be the probable solution to minimize the crop nitrogen requirement by 15-20% with a yield enhancement of about 18.7% over RDF.

Rejuvenation of dearomative cycloaddition reactions via visible light energy transfer catalysis.

Dearomative cycloaddition is a powerful technique to access sp3-rich three-dimensional structural motifs from simple flat, aromatic feedstock. The building-up of unprecedentedly diverse polycyclic scaffolds with increased saturation and stereochemical information having various applications ranging from pharmaceutical to material sciences, is an essential goal in organic chemistry. However, the requirement of large energy inputs to disrupt the aromaticity of an arene moiety necessitates harsh reaction conditions for ground state dearomative cycloaddition. The photochemical requirement encompasses use of ultraviolet (UV) light to enable the reaction on an excited potential energy surface. The microscopic reversibility under thermal conditions and the use of high energy harmful UV irradiation in photochemical manoeuvres, however, constrain their widespread use from a synthetic point of view. In this context, the recent renaissance of visible light energy transfer (EnT) catalysis has become a powerful tool to initiate dearomative cycloaddition as a greener and more sustainable approach. The excited triplet state population is achieved by triplet energy transfer from the appropriate photosensitizer to the substrate. While employing mild visible light energy as fuel, the process leverages an enormous potential of excited state reactivity. The discovery of an impressive portfolio of organic and inorganic photosensitizers with a range of triplet energies facilitates visible light photosensitized dearomative cycloaddition of various substrates to form sp3-rich fused polycyclic architectures with diverse applications. The tutorial review comprehensively surveys the reawakening of dearomative cycloadditions via visible light-mediated energy transfer catalysis in the past five years. The progress ranges from intra- and intermolecular [2π + 2π] to [4π + 2π], and ends at intermolecular [2π + 2σ] cycloadditions. Furthermore, the review provides potential possibilities for future growth in the growing field of visible light energy transfer catalysis.

Investigating the transport and colloidal behavior of Fe3O4 nanoparticles in aqueous and porous media under varying solution chemistry parameters.

The possible adverse effects of engineered iron oxide nanoparticles, especially magnetite (Fe3O4 NP), on human health and the environment, have raised concerns about their transport and behavior in soil and water systems. Accumulating these NPs in the environment can substantially affect soil and water quality and the well-being of aquatic and terrestrial organisms. Therefore, it is essential to examine the factors that affect Fe3O4 NP transportation and behavior in soil and water systems to determine their possible environmental fate. In this work, experiments were conducted in aqueous and porous media using an environmentally relevant range of pH (5, 7, 9), ionic strength (IS) (10, 50, 100 mM), and humic acid (HA) (0.1, 1, 10 mg L-1) concentrations. Fe3O4 NPs exhibited severe colloidal instability at pH 7 (⁓ = pHPZC) and showed an improvement in apparent colloidal stability at pH 5 and 9 in aquatic and terrestrial environments. HA in the background solutions promoted the overall transport of Fe3O4 NPs by enhancing the colloidal stability. The increased ionic strength in aqueous media hindered the transport by electron double-layer compression and electrostatic repulsion; however, in porous media, the transport was hindered by ionic compression. Furthermore, the transport behavior of Fe3O4 NPs was investigated in different natural waters such as rivers, lakes, taps, and groundwater. The interaction energy pattern in aquatic systems was estimated using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. This study showed the effects of various physical-chemical conditions on Fe3O4 NP transport in aqueous and porous (sand) media.

Comparative toxicity assessment of individual, binary and ternary mixtures of SiO2, Fe3O4, and ZnO nanoparticles in freshwater microalgae, Scenedesmus obliquus: Exploring the role of dissolved ions.

Metal oxide nanoparticles (NPs) are considered among the most prevalent engineered nanomaterials. To have a deeper understanding of the mode of action of multiple metal oxide nanoparticles in mixtures, we have used a unicellular freshwater microalga Scenedesmus obliquus as a model organism. The toxicity of silicon dioxide (SiO2), iron oxide (Fe3O4), and zinc oxide (ZnO) NPs was studied individually as well as in their binary (SiO2 + Fe3O4, Fe3O4 + ZnO, and ZnO + SiO2) and ternary (SiO2 + Fe3O4 + ZnO) combinations. The effects of metal ions from ZnO and Fe3O4 were investigated as well. The results observed from the study, showed that a significant amount of toxicity was contributed by the dissolved ions in the mixtures of the nanoparticles. Decreases in the cell viability, ROS generation, lipid peroxidation, antioxidant enzyme activity, and photosynthetic efficiency were analyzed. Among all the individual particles, ZnO NPs showed the maximum effects and increased the toxicities of the binary mixtures. The binary and ternary mixtures of the NPs clearly showed increased toxic effects in comparison with the individual entities. However, the ternary combination had lesser toxic effects than the binary combination of Fe3O4 + ZnO. The decline in cell viability and photosynthetic efficiency were strongly correlated with various oxidative stress biomarkers emphasizing the crucial role of reactive oxygen species in inducing the toxic effects. The findings from this study highlight the importance of evaluating the combinatorial effects of various metal oxide NPs as part of a comprehensive ecotoxicity assessment in freshwater microalgae.

Fungal effectors versus defense-related genes of B. juncea and the status of resistant transgenics against fungal pathogens.

Oilseed brassica has become instrumental in securing global food and nutritional security. B. juncea, colloquially known as Indian mustard, is cultivated across tropics and subtropics including Indian subcontinent. The production of Indian mustard is severely hampered by fungal pathogens which necessitates human interventions. Chemicals are often resorted to as they are quick and effective, but due to their economic and ecological unsustainability, there is a need to explore their alternatives. The B. juncea-fungal pathosystem is quite diverse as it covers broad-host range necrotrophs (Sclerotinia sclerotiorum), narrow-host range necrotrophs (Alternaria brassicae and A. brassicicola) and biotrophic oomycetes (Albugo candida and Hyaloperonospora brassica). Plants ward off fungal pathogens through two-step resistance mechanism; PTI which involves recognition of elicitors and ETI where the resistance gene (R gene) interacts with the fungal effectors. The hormonal signalling is also found to play a vital role in defense as the JA/ET pathway is initiated at the time of necrotroph infection and SA pathway is induced when the biotrophs attack plants. The review discuss the prevalence of fungal pathogens of Indian mustard and the studies conducted on effectoromics. It covers both pathogenicity conferring genes and host-specific toxins (HSTs) that can be used for a variety of purposes such as identifying cognate R genes, understanding pathogenicity and virulence mechanisms, and establishing the phylogeny of fungal pathogens. It further encompasses the studies on identifying resistant sources and characterisation of R genes/quantitative trait loci and defense-related genes identified in Brassicaceae and unrelated species which, upon introgression or overexpression, confer resistance. Finally, the studies conducted on developing resistant transgenics in Brassicaceae have been covered in which chitinase and glucanase genes are mostly used. The knowledge gained from this review can further be used for imparting resistance against major fungal pathogens.

Comparative ecotoxicity of graphene, functionalized multi-walled CNTs, and their mixture in freshwater microalgae, Scenedesmus obliquus: analyzing the role of oxidative stress.

Due to their remarkable properties, the applications of carbon-based nanomaterials (CNMs) such as graphene and functionalized multi-walled carbon nanotubes (f-MWCNTs) are increasing. These CNMs can enter the freshwater environment via numerous routes, potentially exposing various organisms. The current study assesses the effects of graphene, f-MWCNTs, and their binary mixture on the freshwater algal species Scenedesmus obliquus. The concentration for the individual materials was kept at 1 mg L-1, while graphene and f-MWCNTs were taken at 0.5 mg L-1 each for the combination. Both the CNMs caused a decrease in cell viability, esterase activity, and photosynthetic efficiency in the cells. The cytotoxic effects were accompanied by increased hydroxyl and superoxide radical generation, lipid peroxidation, antioxidant enzyme activity (catalase and superoxide dismutase), and mitochondrial membrane potential. Graphene was more toxic compared to f-MWCNTs. The binary mixture of the pollutants demonstrated a synergistic enhancement of the toxic potential. Oxidative stress generation played a critical role in toxicity responses, as noted by a strong correlation between the physiological parameters and the biomarkers of oxidative stress. The outcomes from this study emphasize the significance of considering the combined effects of various CNMs as part of a thorough evaluation of ecotoxicity in freshwater organisms.

Draft genome sequencing and secretome profiling of Sclerotinia sclerotiorum revealed effector repertoire diversity and allied broad-host range necrotrophy.

White mold commonly known as Sclerotinia sclerotiorum causes stem rot disease and has emerged as one of the major fungal pathogens of oilseed Brassica across the world. In the present study, consistently virulent S. sclerotiorum isolate "ESR-01" was sequenced and an assembly size of ~ 41 Mb with 328 scaffolds having N50 of 447,128 was obtained. Additionally, 27,450 single nucleotide polymorphisms (SNPs) were identified from 155 scaffolds against S. sclerotiorum 1980 isolate, with an average SNP density of ~ 1.5 per kb genome. 667 repetitive elements were identified and approximately comprised 7% of the total annotated genes. The DDE_1 with 454 in numbers was found to be the most abundant and accounts for 68% of the total predicted repetitive elements. In total, 3844 simple sequence repeats are identified in the 328 scaffolds. A total of 9469 protein-coding genes were predicted from the whole genome assembly with an average gene length of 1587 bp and their distribution as 230.95 genes per Mb in the genome. Out of 9469 predicted protein-coding genes, 529 genes were observed encoding the CAZymes (Carbohydrate-Active enzymes) capable of degradation of the complex polysaccharides. Glycosyltransferase (GT) families were most abundant (49.71%) among the predicted CAZymes and GT2 (23%), GT4 (20%), and glycoside hydrolase (GH) 23% with GH18 (11%) were the prominent cell wall degrading enzyme families in the ESR-01 secretome. Besides this, 156 genes essential for the pathogen-host interactions were also identified. The effector analysis in the whole genome proteomics dataset revealed a total of 57 effector candidates (ECs) and 27 of them were having their analogs whereas the remaining 30 were novel ones. Eleven selected ECs were validated experimentally by analyzing the expression profile of the ESR-01 isolate of S. sclerotiorum. Together, the present investigation offers a better understanding of the S. sclerotiorum genome, secretome, and its effector repertoire which will help in refining the present knowledge on S. sclerotiorum-Brassica interactions and necrotrophic lifestyle of the phytopathogen in general.

Development of genome-specific SSR markers for the identification of introgressed segments of Sinapis alba in the Brassica juncea background.

Sinapis alba L. (white mustard) is recognized for carrying host resistance against several biotic stresses including, Alternaria brassicae, which is responsible for blight disease in cultivated Brassica. However, another cultivated Brassica has a dearth for genetic resistance for these stresses due to its narrow genetic base. Therefore, we performed introgression of the genomic regions of S. alba into backcross progenies of B. juncea + S. alba somatic hybrids. These advanced generations with S. alba chromosomal segments are named B. juncea-S. alba introgression lines (ILs). In the present study, we developed the S. alba genome-specific microsatellites from the draft genome to track the S. alba genome introgressions and responsible regions for resistance to A. brassicae. For developing these SSR markers, the unique contigs of S. alba draft genome were identified through BLASTN with B. juncea, B. rapa, B. nigra, and B. oleracea reference genome assemblies, including mitochondrial and chloroplast genomes, and further used for marker development. Out of 403,423 contigs, we have identified 65,343 non-hit contigs of S. alba that yielded a total of 1231 genome-specific microsatellites, out of which 1107 were expected to produce a single allele upon amplification. Out of the total SSRs, 234 primer pairs were randomly picked from whole-genome and validated between B. juncea and S. alba genomes for their specificity. In the validation experiment, these markers gave a single amplicon into S. alba, while they did not amplify in B. juncea genome. Of these, 59 microsatellites were used to track S. alba introgressions in 80 BC2F3 lines. To the best of our knowledge, this is the first time that these two genetic resources are developed in the form of B. juncea-S. alba ILs and S. alba-specific markers. Therefore, both the resources unlock a new avenue of Brassica breeding for biotic and abiotic stresses along with quality traits. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-022-03402-0.

Intermolecular dearomative [4 + 2] cycloaddition of naphthalenes via visible-light energy-transfer-catalysis.

The dearomative cycloaddition reaction serves as a blueprint for creating sp3-rich three-dimensional molecular topology from flat-aromatic compounds. However, severe reactivity and selectivity issues make this process arduous. Herein, we describe visible-light energy-transfer catalysis for the intermolecular dearomative [4 + 2] cycloaddition reaction of feedstock naphthalene molecules with vinyl benzenes. Tolerating a wide range of functional groups, structurally diverse 2-acyl naphthalenes and styrenes could easily be converted to a diverse range of bicyclo[2.2.2]octa-2,5-diene scaffolds in high yields and moderate endo-selectivities. The late-stage modification of the derivatives of pharmaceutical agents further demonstrated the broad potentiality of this methodology. The efficacy of the introduced methods was further highlighted by the post-synthetic diversification of the products. Furthermore, photoluminescence, electrochemical, kinetic, control experiments, and density-functional theory calculations support energy-transfer catalysis.

Enantioselective C-H bond functionalization of aromatic ketones with 1,6-enynes via photoredox/cobalt dual catalysis.

An enantioselective ortho-C(sp2)-H functionalization of ketones with 1,6-enynes is demonstrated via photoredox/cobalt dual catalysis. The method exhibits high yields, functional group tolerance, and selectivity. Mechanistic studies suggested the operation of visible-light mediated low-valent cobalt complex generation, intramolecular cyclization, ortho-C-H bond insertion, and reductive elimination as the key mechanistic steps.

Dicarbofunctionalizations of an Unactivated Alkene via Photoredox/Nickel Dual Catalysis.

1,2-Dicarbofunctionalization of unactivated olefin has been reported under photoredox/nickel dual catalysis. The mildness of the visible-light-mediated reaction allows the use of various alkyl and aryl electrophiles with several sensitive functional groups. The protocol was equally applied for late-stage diversification of drugs and biologically active molecules. Investigations elucidated the importance of photoredox/nickel dual catalysis and α-amino-radical-mediated halogen atom transfer and provided us with the nickel complexes involved in the reaction.

2,4,6-trinitrotoluene (TNT) degradation by Indiicoccus explosivorum (S5-TSA-19).

2,4,6-trinitrotoluene (TNT), a nitro-aromatic explosive commonly used for defense and several non-violent applications is contributing to serious environmental pollution problems including human health. The current study investigated the remediation potential of a native soil isolate, i.e., Indiicoccus explosivorum (strain S5-TSA-19) isolated from collected samples of an explosive manufacturing site, against TNT. The survivability of I. explosivorum against explosives is indirectly justified through its isolation; thus, it is being chosen for further study. At a TNT concentration of 120 mg/L within an optimized environment (i.e., at 30 °C and 120 rpm), the isolate was continually incubated for 30 days in a minimal salt medium (MSM). The proliferation of the isolate and the concentration of TNT, nitrate, nitrite, and ammonium ion were evaluated at a particular time during the experiment. Within 168 h (i.e., 7 days) of incubation, I. explosivorum co-metabolically degraded 100% TNT. The biodegradation procedure succeeded the first-order kinetics mechanism. Formations of additional metabolites like 2,4-dinitrotoluene (DNT), 2,4-diamino-6-nitrotoluene (2-DANT), and 2-amino-4,6-dinitrotoluene (2-ADNT), were also witnessed. TNT seems to be non-toxic for the isolate, as it reproduced admirably in TNT presence. To date, it is the first report of Indiicoccus explosivorum, efficiently bio-remediating TNT, i.e., a nitro-aromatic compound via different degradation pathways, leading to the production of simpler as well as less harmful end products. Further, at the field-scale application, Indiicoccus explosivorum may be explored for the bioremediation of TNT (i.e., a nitro-aromatic compound)-contaminated effluents.

Nano-SiO2 transport and retention in saturated porous medium: Influence of pH, ionic strength, and natural organics.

Nano silica (nSiO2), induces potential harmful effects on the living environment and human health. It is well established that SiO2 facilitates the co-transport of a variety of other contaminants, including heavy metals and pesticides. The current study focused on the systematic evaluation of the effects of multiple physicochemical parameters such as pH (5, 7, and 9), ionic strength (10, 50, and 100 mM), and humic acid (0.1, 1, and 10 mg/L) on the transport and retention of nSiO2 in saturated porous medium. Additionally, the influent concentration of nSiO2 (10, 50, and 100 mg/L) was also varied. Our experimental findings indicate that the size of nSiO2 aggregates was directly related to the pH, ionic strength, HA, and particle concentration had a significant impact on the breakthrough curves (BTCs). The stability provided by the varying concentrations of pH and humic acid had a significant effect on the size of nSiO2 aggregates and transport (C/C0 > 0.7). The presence of a greater magnitude of negative charge on the surface of both nSiO2 and quartz sand resulted in less aggregation and enhanced flow of nSiO2 through the sand column. The Electrostatic and steric repulsion forces were the primary governing mechanisms in relation to the size of nSiO2 aggregates, affecting the single-collector efficiency and attachment efficiency, which determined the maximal transport of nSiO2. Conversely, a probable increase in Van der Waals force of attraction exacerbated the particle deposition and reduced their mobility for high ionic strength, and particle concentrations (C/C0 < 0.1). The formation of large nSiO2 aggregates, in particular, was principally responsible for the enhancement of nSiO2 retention in sand columns over a broad range of IS and particle concentration. The interaction energy profiles based on the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory were determined to understand the mechanism of nSiO2 deposition. Aditionally, all the experimental BTCs were mathematically simulated and justified by the colloidal filtration theory (CFT). Considering the environmental ramifications, the transport behavior of nSiO2 was further evaluated in various natural matrices such as river, lake, ground, and tap water. The nSiO2 suspended in the river, lake, and tap water had significantly higher mobility (C/C0 > 0.7), whereas groundwater indicated higher retention (C/C0 < 0.3). The study advances our collective knowledge of physicochemical and environmental parameters that can affect particle mobility.

A comprehensive estimate of the aggregation and transport of nSiO2 in static and dynamic aqueous systems.

Silicon dioxide nanoparticles (nSiO2) are extensively used in diverse fields and are inevitably released into the natural environment. Their overall aggregation behaviour in the environmental matrix can determine their fate and ecotoxicological effect on terrestrial and aquatic life. The current study systematically evaluates multiple parameters that can influence the stability of colloidal nSiO2 (47 nm) in the natural aquatic environment. At first, the influence of several hydrochemical parameters such as pH (5, 7, and 9), ionic strength (IS) (10, 50, and 100 mM), and humic acid (HA) (0.1, 1, and 10 mg L-1) was examined to understand the overall aggregation process of nSiO2. Furthermore, the synergistic and antagonistic effects of ionic strength and humic acid on the transport of nSiO2 in the aqueous environment were examined. Our experimental findings indicate that pH, ionic strength, and humic acid all had a profound influence on the sedimentation process of nSiO2. The experimental observations were corroborated by calculating the DLVO interaction energy profile, which was shown to be congruent with the transport patterns. The present study also highlights the influence of high and low shear forces on the sedimentation process of nSiO2 in the aqueous medium. The presence of shear force altered the collision efficiency and other interactive forces between the nanoparticles in the colloidal suspension. Under the experimental stirring conditions, a higher abundance of dispersed nSiO2 in the upper layer of the aqueous medium was noted. Additionally, the transport behaviour of nSiO2 was studied in a variety of natural water systems, including rivers, lakes, ground, and tap water. The study significantly contributes to our understanding of the different physical, chemical, and environmental aspects that can critically impact the sedimentation and spatial distribution of nSiO2 in static and dynamic aquatic ecosystems.

Recent Development of Bis-Cyclometalated Chiral-at-Iridium and Rhodium Complexes for Asymmetric Catalysis.

The field of asymmetric catalysis has been developing to access synthetically efficacious chiral molecules from the last century. Although there are many sustainable ways to produce nonracemic molecules, simplified and unique methodologies are always appreciated. In the recent developments of asymmetric catalysis, chiral-at-metal Lewis acid catalysis has been recognized as an attractive strategy. The catalysts coordinatively activate a substrate while serving the sole source of chirality by virtue of its helical environment. These configurationally stable complexes were utilized in a large number of asymmetric transformations, ranging from asymmetric Lewis acid catalysis to photoredox and electrocatalysis. Here we provide a comprehensive review of the current advancements in asymmetric catalysis utilizing iridium and rhodium-based chiral-at-metal complexes as catalysts. First, the asymmetric transformations via LUMO and HOMO activation assisted by a chiral Lewis acid catalyst are reviewed. In the second part, visible-light-induced asymmetric catalysis is summarized. The asymmetric transformation via the electricity-driven method is discussed in the final section.

Biodegradation of octogen and hexogen by Pelomonas aquatica strain WS2-R2A-65 under aerobic condition.

Biodegradation ability of a native bacterial species Pelomonas aquatica strain WS2-R2A-65, isolated from nitramine explosive-contaminated effluent, for octogen (HMX) and hexogen (RDX) under aerobic condition has been explored in this study. Scanning electron microscopy indicated that the isolate WS2-R2A-65 retained its morphology both in the presence and absence of HMX or RDX. During an incubation period of 20 days, the isolate cometabolically degraded 78 and 86% of HMX and RDX with initial concentrations 6 and 60 mg L-1, respectively. The degradation mechanism followed the first-order kinetics for both the nitramines with a 50% degradation time of 9.9 and 7.7 days for HMX and RDX, respectively. Positive electrospray ionisation mass spectroscopy indicates that biodegradation of nitamines follows multiple degradation pathways with one involving ring cleavage via single-electron transfer to nitramines leading to the elimination of single nitrite ion as evident from the formation of methylenedinitramine (MEDINA) and its methyl derivatives. The other pathways involve the reduction of both the nitramines to their nitroso, hydroxylamino and amino derivatives. These metabolites get further ring cleaved to give secondary metabolites viz. N-hydroxymethylmethylenedintramine, N-nitrosoamino and hydrazinyl derivatives leading to simpler less hazardous end products. Thus, the isolate WS2-R2A-65 proves to be an efficient microbial species for bioremediation of nitramines-contaminated effluent.

Cooperative Lewis Acid Catalysis for the Enantioselective C(sp3)-H Bond Functionalizations of 2-Alkyl Azaarenes.

Herein, we describe the enantioselective C(sp3)-H bond functionalizations of 2-alkyl azaarenes using a cooperative dual Lewis acid catalysis. An achiral Lewis acid activates the unactivated azaarene partner without the need for a strong base. Orthogonally, a chiral-at-metal Lewis acid catalyst enables LUMO lowering and induces chirality. This method tolerates a range of complex molecular scaffolds and exhibits good to excellent yields and selectivity while accepting a wide variety of functional groups.

Discrimination of gallbladder stone employing Laser-Induced Breakdown Spectroscopy (LIBS) and Photoacoustic Spectroscopy (PAS).

Compositional analysis of gallstone samples has been carried out, using Laser-Induced Breakdown Spectroscopy (LIBS) and Photoacoustic Spectroscopy (PAS). Classification of gallstone has been made on the basis of intensities of the inorganic and organic constituents present in the LIBS spectra. A regression plot is drawn between LIBS spectral intensities of organic & inorganic elements and the stoichiometric ratio of Cholesterol, Bilirubin and Calcium Carbonate. Atomic lines of various elements, as well as molecular signatures of CaO Orange band, CN Violet band, and C2 Swan band, are observed in LIBS spectra. The relative hardness of gallstones is estimated from the intensity ratio of ionic to neutral atomic lines of the species observed in LIBS spectra. PAS is used for detecting molecular constituents in the gallstones. Principal Component Analysis (PCA) is performed for the discrimination of gallstones. It is found that PAS data, in combination with LIBS provide a suitable method for the compositional analysis of gallstones.

Current Status of the Disease-Resistant Gene(s)/QTLs, and Strategies for Improvement in Brassica juncea.

Brassica juncea is a major oilseed crop in tropical and subtropical countries, especially in south-east Asia like India, China, Bangladesh, and Pakistan. The widespread cultivation of genetically similar varieties tends to attract fungal pathogens which cause heavy yield losses in the absence of resistant sources. The conventional disease management techniques are often expensive, have limited efficacy, and cause additional harm to the environment. A substantial approach is to identify and use of resistance sources within the Brassica hosts and other non-hosts to ensure sustainable oilseed crop production. In the present review, we discuss six major fungal pathogens of B. juncea: Sclerotinia stem rot (Sclerotinia sclerotiorum), Alternaria blight (Alternaria brassicae), White rust (Albugo candida), Downy mildew (Hyaloperonospora parasitica), Powdery mildew (Erysiphe cruciferarum), and Blackleg (Leptoshaeria maculans). From discussing studies on pathogen prevalence in B. juncea, the review then focuses on highlighting the resistance sources and quantitative trait loci/gene identified so far from Brassicaceae and non-filial sources against these fungal pathogens. The problems in the identification of resistance sources for B. juncea concerning genome complexity in host subpopulation and pathotypes were addressed. Emphasis has been laid on more elaborate and coordinated research to identify and deploy R genes, robust techniques, and research materials. Examples of fully characterized genes conferring resistance have been discussed that can be transformed into B. juncea using advanced genomics tools. Lastly, effective strategies for B. juncea improvement through introgression of novel R genes, development of pre-breeding resistant lines, characterization of pathotypes, and defense-related secondary metabolites have been provided suggesting the plan for the development of resistant B. juncea.