Industrial practitioner's perception on the application of exoskeleton system in automotive assembly industries: A Malaysian case study.

The automotive industry is a key manufacturing industry for the Malaysian economy, where manual jobs and task are still common. Hence, Work-related Musculoskeletal Disorders (WMSD) is a common type of injury among workers. Exoskeleton system has gained global traction as a possible solution to reduce the risk of MSD among workers. Nonetheless, the application of exoskeleton in the automotive industry in Malaysia remains unknown. As such, this study attempts to provide insight into the industry's perception on the potential of exoskeleton application within the context of Malaysian automotive assembly sector. Therefore, a total of 52 management level respondents from various manufacturers participated in this study. It is found that, although the technology seems to be relatively new and disruptive, the respondents have a positive perception towards it with an acceptance rate of 86.5%. Cost of implementation exoskeleton technologies seems to be primary concern from the respondents, other concern such as maintenance cost and ease of application into existing application is also highlighted.

An analysis of the effect of syringe barrel volume on performance and user perception.

In the market, there are many types and shapes of syringes. One of the groupings of syringe types is based on barrel volume. The shape of the product design affects performance and user perception. The aim of this study is to investigate the effect of barrel volume on its performance and user perception. We performed analysis following international organization for standardization 7886 procedures on syringe with 1 mL, 3 mL, 5 mL, and 10 mL volume. In addition, a user perception test was conducted on 29 respondents using a questionnaire with the Likert chart method. This study indicates that the bigger the syringe volume, the larger the dead space and the force to operate the piston are. A larger syringe volume also raises the volume that changes due to the plunger position increase. Meanwhile, the barrel volume does not affect water and water leakage, as we did not observe any leak during the syringe tests in our experiment. In addition, the user perception test shows that the barrel's length influences the ease of device control during the injection. The volume of the barrel negatively correlated with its effect to the environment. The safety features of all syringes are similar except for the 3 mL syringe, which has a value of 0.1 points difference to other syringes.

Vehicle Driving Risk Prediction Model by Reverse Artificial Intelligence Neural Network.

The popularity of private cars has brought great convenience to citizens' travel. However, the number of private cars in society is increasing yearly, and the traffic pressure on the road is also increasing. The number of traffic accidents is increasing yearly, and the vast majority are caused by small private cars. Therefore, it is necessary to improve the traffic safety awareness of drivers and help car manufacturers to design traffic risk prediction systems. The Backpropagation neural network (BPNN) algorithm is used as the technical basis, combined with the MATLAB operation program, to simulate the driving process of the car. Dynamic predictive models are built to predict and analyze vehicle safety risks. Multiple experiments found that: (1) in various simulations, the simulation driving process of MATLAB is more in line with the actual car driving process; (2) the error between BPNN and the actual driving prediction is within 0.4, which can meet the actual needs. Predictive models are optimized to deploy and predict in various traffic situations. The model can effectively prompt risk accidents, reduce the probability of traffic accidents, provide a certain degree of protection for the lives of drivers and passengers, and significantly improve the safety of traffic roads.

The hypodermic syringe performance based on the ISO 7886-1:2017: A narrative review.

A syringe is used to inject fluid or medicine into the patient's soft tissue. The main components of the syringe were the needle, barrel, and plunger. The use of syringes in the medical world is relatively high, and especially since the COVID-19 pandemic, the use of hypodermic syringes increased sharply due to vaccination. The syringe used must be effective and of good quality, so the International Organization for Standardization (ISO) has published test procedures and minimum specifications for hypodermic syringes. The performance of the syringe can be observed from the dead space, force piston operation, water and air leakage, and fitting position of the plunger in the barrel. This review shows that most researchers use the weighing method to measure the dead space, although some use other methods. The researchers found that most of the products met the minimum specifications of the ISO, and that the dimensions and shape of the syringe affected the dead space. Researchers have not examined other performance measures recommended by the ISO. Researchers have focused more on force injection than force piston operation, leakage after injection or back spray than air and water leakage, and reduction the friction of the plunger without considering the fitting position of the plunger in the barrel.

Physical ergonomics awareness in an offshore processing platform among Malaysian oil and gas workers.

Introduction. The reliability of offshore oil and gas (O&G) facilities depends on the operation and maintenance activities, where human physical intervention is involved. Workers are often exposed to ergonomics hazards due to inefficient workplace design. Ergonomics awareness among workers is a crucial factor in mitigating such hazards. Objectives. This study intends to evaluate the state of physical ergonomics awareness among Malaysian O&G workers and to assess their perception toward the criticality of physical ergonomics issues within an offshore processing facility. Methods. Data were collected through online questionnaire distribution. The respondents were required to evaluate three sections of the questionnaire to reflect their state of physical ergonomics awareness: design criteria in an offshore workplace that are related to physical ergonomics; effects of physical ergonomics implementation in design; criticality of physical ergonomics issues. Results. The results showed a good level of physical ergonomics awareness among respondents without them being influenced by dissimilar experiences (engineering design and operation/maintenance) and the range of experience in an offshore workplace. Conclusion. This study provides an overview of Malaysian O&G workers' outlook toward the physical ergonomics issues in an offshore workplace. These data could be further analyzed in future as relevant aspects of designing an offshore facility.

Sustainable supply chain design: a configurational approach.

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.