RESUMO
Broadband data acquired during the Modal Mapping Experiment (MOMAX) V experiment are used to invert simultaneously for the three-dimensional (3D) water column sound speed profiles and the compressional wave speed and density profiles of the seabed in shallow waters off the coast of New Jersey. Linear Frequency Modulation sweep signals in the band 50-300 Hz are transmitted from a nearly stationary source at several discrete positions to a set of freely drifting receivers. Mode travel times are estimated from the signals acquired by the drifting buoys, and these are then used as input data in an inversion algorithm that estimates the acoustic properties of the water column and sediments. The resulting 3D compressional wave speed profiles in the seabed are generally consistent with the one-dimensional profile obtained during the narrowband component of MOMAX V, as well as the results from other experiments in the same area. The validity of the inversion results has also been assessed by the ability of the inverted model to predict the fields measured during the narrowband experiments.
RESUMO
OBJECTIVE: Brain tissue undergoes dramatic molecular and cellular remodeling at the implant-tissue interface that evolves over a period of weeks after implantation. The biomechanical impact of such remodeling on the interface remains unknown. In this study, we aim to assess the changes in the mechanical properties of the brain-electrode interface after chronic implantation of a microelectrode. APPROACH: Microelectrodes were implanted in the rodent cortex at a depth of 1 mm for different durations-1 day (n = 4), 10-14 days (n = 4), 4 weeks (n = 4) and 6-8 weeks (n = 7). After the initial duration of implantation, the microelectrodes were moved an additional 1 mm downward at a constant speed of 10 µm s(-1). Forces experienced by the microelectrode were measured during movement and after termination of movement. The biomechanical properties of the interfacial brain tissue were assessed from measured force-displacement curves using two separate models-a two-parameter Mooney-Rivlin hyperelastic model and a viscoelastic model with a second-order Prony series. MAIN RESULTS: Estimated shear moduli using a second-order viscoelastic model increased from 0.5-2.6 kPa (day 1 of implantation) to 25.7-59.3 kPa (after 4 weeks of implantation) and subsequently decreased to 0.8-7.9 kPa after 6-8 weeks of implantation in 6 of the 7 animals. The estimated elastic modulus increased from 4.1-7.8 kPa on the day of implantation to 24-44.9 kPa after 4 weeks. The elastic modulus was estimated to be 6.8-33.3 kPa in 6 of the 7 animals after 6-8 weeks of implantation. The above estimates suggest that the brain tissue surrounding the microelectrode evolves from a stiff matrix with maximal shear and elastic modulus after 4 weeks of implantation into a composite of two different layers with different mechanical properties-a stiff compact inner layer surrounded by softer brain tissue that is biomechanically similar to brain tissue-during the first week of implantation. Tissue micromotion-induced stresses on the microelectrode constituted 12-55% of the steady-state stresses on the microelectrode on the day of implantation (n = 4), 2-21% of the steady-state stresses after 4 weeks of implantation (n = 4), and 4-10% of the steady-state stresses after 6-8 weeks of implantation (n = 7). SIGNIFICANCE: Understanding biomechanical behavior at the brain-microelectrode interface is necessary for the long-term success of implantable neuroprosthetics and microelectrode arrays. Such quantitative physical characterization of the dynamic changes in the electrode-tissue interface will (a) drive the design and development of more mechanically optimal, chronic brain implants, and (b) lead to new insights into key cellular and molecular events such as neuronal adhesion, migration and function in the immediate vicinity of the brain implant.
