Metallic Wood through Deep-Cell-Wall Metallization: Synthesis and Applications.

Metallic wood combines the unique structural benefits of wood and the properties of metals and is thus promising for applications ranging from heat transfer to electromagnetic shielding to energy conversion. However, achieving metallic wood with full use of wood structural benefits such as anisotropy and multiscale porosity is challenging. A key reason is the limited mass transfer in bulk wood where fibers have closed ends. In this work, programmed removal of cell-wall components (delignification and hemicellulose extraction) was introduced to improve the accessibility of cell walls and mass diffusion in wood. Subsequent low-temperature electroless Cu plating resulted in a uniform continuous Cu coating on the cell wall, and, furthermore, Cu nanoparticles (NPs) insertion into the wood cell wall. A novel Cu NPs-embedded multilayered cell-wall structure was created. The unique structure benefits compressible metal-composite foam, appealing for stress sensors, where the multilayered cell wall contributes to the compressibility and stability. The technology developed for wood metallization here could be transferred to other functionalizations aimed at reaching fine structure in bulk wood.

Gradience Free Nanoinsertion of Fe3O4 into Wood for Enhanced Hydrovoltaic Energy Harvesting.

Hydrovoltaic energy harvesting offers the potential to utilize enormous water energy for sustainable energy systems. Here, we report the utilization and tailoring of an intrinsic anisotropic 3D continuous microchannel structure from native wood for efficient hydrovoltaic energy harvesting by Fe3O4 nanoparticle insertion. Acetone-assisted precursor infiltration ensures the homogenous distribution of Fe ions for gradience-free Fe3O4 nanoparticle formation in wood. The Fe3O4/wood nanocomposites result in an open-circuit voltage of 63 mV and a power density of ∼52 µW/m2 (∼165 times higher than the original wood) under ambient conditions. The output voltage and power density are further increased to 1 V and ∼743 µW/m2 under 3 suns solar irradiation. The enhancement could be attributed to the increase of surface charge, nanoporosity, and photothermal effect from Fe3O4. The device exhibits a stable voltage of ∼1 V for 30 h (3 cycles of 10 h) showing good long-term stability. The methodology offers the potential for hierarchical organic-inorganic nanocomposite design for scalable and efficient ambient energy harvesting.

Ultrastrong Ionotronic Films Showing Electrochemical Osmotic Actuation.

A multifunctional soft material with high ionic and electrical conductivity, combined with high mechanical properties and the ability to change shape can enable bioinspired responsive devices and systems. The incorporation of all these characteristics in a single material is very challenging, as the improvement of one property tends to reduce other properties. Here, a nanocomposite film based on charged, high-aspect-ratio 1D flexible nanocellulose fibrils, and 2D Ti3 C2 Tx MXene is presented. The self-assembly process results in a stratified structure with the nanoparticles aligned in-plane, providing high ionotronic conductivity and mechanical strength, as well as large water uptake. In hydrogel form with 20 wt% liquid, the electrical conductivity is over 200 S cm-1 and the in-plane tensile strength is close to 100 MPa. This multifunctional performance results from the uniquely layered composite structure at nano- and mesoscales. A new type of electrical soft actuator is assembled where voltage as low as ±1 V resulted in osmotic effects and giant reversible out-of-plane swelling, reaching 85% strain.

ZnO microrods sandwiched between layered CNF matrix: Fabrication, stress transfer, and mechanical properties.

Functional metal oxide particles are often added to the polymers to prepare flexible functional polymer composites with adequate mechanical properties. ZnO and cellulose nanofibrils (CNF) outstand among these metal oxides and the polymer matrices respectively due to their various advantages. Herein, we in situ prepare ZnO microrods in the presence of CNF, which resultes in a layered composite structure. The ZnO microrods are sandwiched between the CNF layers and strongly bind to highly charged CNF, which provides a better stress transfer during mechanical activity. Digital image correction (DIC) and finite element analysis-based computational homogenization methods are used to investigate the relationship between mechanical properties and composite structure, and the stress transfer to the ZnO microrods. Full-field strain measurements in DIC reveal that the in situ ZnO microrods preparation leads to their homogenous distribution in the CNF matrix unlike other methods, which require external means such as ultrasonication. The computational homogenization technique provides a fairly good insight into the stress transfer between constituents in microstructure as well as a good prediction of macroscopic mechanical properties, which otherwise, would be challenging to be assessed by any ordinary mechanical testing in the layered composites. Finally, we also demonstrate that these composites could be used as physiological motion sensors for human health monitoring.

Aqueous synthesis of highly functional, hydrophobic, and chemically recyclable cellulose nanomaterials through oxime ligation.

Cellulose nanofibril (CNF) materials are candidates for the sustainable development of high mechanical performance nanomaterials. Due to inherent hydrophilicity and limited functionality range, most applications require chemical modification of CNF. However, targeted transformations directly on CNF are cumbersome due to the propensity of CNF to aggregate in non-aqueous solvents at high concentrations, complicating the choice of suitable reagents and requiring tedious separations of the final product. This work addresses this challenge by developing a general, entirely water-based, and experimentally simple methodology for functionalizing CNF, providing aliphatic, allylic, propargylic, azobenzylic, and substituted benzylic functional groups. The first step is NaIO4 oxidation to dialdehyde-CNF in the wet cake state, followed by oxime ligation with O-substituted hydroxylamines. The increased hydrolytic stability of oximes removes the need for reductive stabilization as often required for the analogous imines where aldehyde groups react with amines in water. Overall, the process provides a tailored degree of nanofibril functionalization (2-4.5 mmol/g) with the possible reversible detachment of the functionality under mildly acidic conditions, resulting in the reformation of dialdehyde CNF. The modified CNF materials were assessed for potential applications in green electronics and triboelectric nanogenerators.

Functionalized Wood Veneers as Vibration Sensors: Exploring Wood Piezoelectricity and Hierarchical Structure Effects.

Functional wood materials often rely on active additives due to the weak piezoelectric response of wood itself. Here, we chemically modify wood to form functionalized, eco-friendly wood veneer for self-powered vibration sensors. Only the piezoelectricity of the cellulose microfibrils is used, where the drastic improvement comes only from molecular and nanoscale wood structure tuning. Sequential wood modifications (delignification, oxidation, and model fluorination) are performed, and effects on vibration sensing abilities are investigated. Wood veneer piezoelectricity is characterized by the piezoresponse force microscopy mode in atomic force microscopy. Delignification, oxidation, and model fluorination of wood-based sensors provide output voltages of 11.4, 23.2, and 60 mV by facilitating cellulose microfibril deformation. The vibration sensing ability correlates with improved piezoelectricity and increased cellulose deformation, most likely by large, local cell wall bending. This shows that nanostructural wood materials design can tailor the functional properties of wood devices with potential in sustainable nanotechnology.

Phosphorous-Doped Graphitic Material as a Solid Acid Catalyst for Microwave-Assisted Synthesis of ß-Ketoenamines and Baeyer-Villiger Oxidation.

Synthesis of phosphorous-doped graphitic materials (P-Gc) using phytic acid as a precursor was done in a microwave oven in a cost- and time-effective green way. The material was used as a solid acid catalyst for microwave (MW)-assisted synthesis of ß-ketoenamines and Baeyer-Villiger (BV) oxidation. In the case of BV oxidation, hydrogen peroxide (H2O2) was used as a green oxidant. For ß-ketoenamines, in most cases, 100% conversion with an ∼95% yield was achieved in ethyl acetate medium. In solvent-free conditions, the yield of ß-ketoenamines was ∼75%. A kinetic study suggested that the resonance stabilization of the positive reaction center happens in the transition state for ß-ketoenamine synthesis. In BV oxidation, cyclic ketones were converted to their corresponding cyclic esters in good to high yields (∼80% yield) in a shorter reaction time (6-20 min). As per our knowledge, this is the first report of BV oxidation catalyzed by a heteroatom-doped graphitic material. For BV oxidation, the phosphoric acid functional groups present in P-Gc might increase the electrophilicity of the carbonyl group of the ketones to compensate for the weakness of H2O2 as a nucleophile and a spiro-bisperoxide intermediate has been identified in high-resolution mass spectrometry.

Piezoelectric Energy Harvesting from a Ferroelectric Hybrid Salt [Ph3 MeP]4 [Ni(NCS)6 ] Embedded in a Polymer Matrix.

Organic-inorganic hybrid ferroelectrics are an exciting class of molecular materials with promising applications in the area of energy and electronics. The synthesis, ferroelectric and piezoelectric energy harvesting behavior of a 3d metal ion-containing A4 BX6 type organic-inorganic hybrid salt [Ph3 MeP]4 [Ni(NCS)6 ] (1) is now presented. P-E hysteresis loop studies on 1 show a remnant ferroelectric polarization value of 18.71 µC cm-2 , at room temperature. Composite thermoplastic polyurethane (TPU) devices with 5, 10, 15 and 20 wt % compositions of 1 were prepared and employed for piezoelectric energy harvesting studies. A maximum output voltage of 19.29 V and a calculated power density value of 2.51 mW cm-3 were observed for the 15 wt % 1-TPU device. The capacitor charging experiments on the 15 wt % 1-TPU composite device shows an excellent energy storage performance with the highest stored energies and measured charges of 198.8 µJ and 600 µC, respectively.

Influence of nanocellulose on mechanics and morphology of polyvinyl alcohol xerogels.

Xerogels are porous networks of crosslinked polymers that are useful for biomedical applications such as drug delivery, scaffold engineering, tissue regeneration, cell culture and wound dressing. However, inferior mechanical properties curtail their applications to a considerable extent. Nanocellulose fibers and crystals are often added into the polymer matrix to improve their mechanical strength. Here, nanocellulose in the mass ratios of 7%, 13% and 18% are loaded into polyvinyl alcohol (PVA) matrix followed by thermo-morpho-mechanical characterization. With increase in nanocellulose content, thermal degradation occurs at a lower temperature. It is observed that addition of higher quantity of nanocellulose crystals leads to the formation of weak cellulose-rich regions causing xerogel rupture. This is predominantly observed for xerogel loaded with 18% nanocellulose crystals. Similarly, addition of higher quantity of nanocellulose fibers increase brittleness of the xerogels causing fracture. This is predominantly observed for xerogel loaded with 18% nanocellulose fibers. Creep strain and stress relaxation is observed to decrease with addition of nanocellulose loading owing to molecular chain restriction and polymer chain immobility.

A Flexible Composite Mechanical Energy Harvester from a Ferroelectric Organoamino Phosphonium Salt.

A new binary organic salt diphenyl diisopropylamino phosphonium hexaflurophosphate (DPDP⋅PF6 ) was shown to exhibit a good ferroelectric response and employed for mechanical energy harvesting application. The phosphonium salt crystallizes in the monoclinic noncentrosymmetric space group Cc and exhibits an H-bonded 1D chain structure due to N-H⋅⋅⋅F interactions. Ferroelectric measurements on the single crystals of DPDP⋅PF6 gave a well-saturated rectangular hysteresis loop with a remnant (Pr ) polarization value of 6 µC cm-2 . Further, composite devices based on polydimethylsiloxane (PDMS) films for various weight percentages (3, 5, 7, 10 and 20 wt %) of DPDP⋅PF6 were prepared and examined for power generation by using an impact test setup. A maximum output peak-to-peak voltage (VPP ) of 8.5 V and an output peak-to-peak current (IPP ) of 0.5 µA was obtained for the non-poled composite film with 10 wt % of DPDP⋅PF6 . These results show the efficacy of organic ferroelectric substances as potential micropower generators.