Electrochemical, gravimetric and surface studies of Phalaris canariensis oil extract as corrosion inhibitor for 316 L type stainless steel in H2O-LiCl mixtures.

The corrosion inhibition action of Phalaris canariensis extract on 316 L stainless steel in the H2O-35 (wt%) LiCl mixture at different temperatures has been evaluated with the aid of weight loss, potentiodynamic polarization curves, linear polarization resistance and electrochemical impedance spectroscopy tests. These studies were complemented by Fourier Transformed Infrared spectroscopy, FTIR, gas/mass chromatography analytical techniques and detailed scanning electronic microscopy studies. Results have indicated that Phalaris canariensis extract is an efficient inhibitor, with an efficiency that increases with its concentration, but it decreases as the temperature increases. Phalaris canariensis extract is physically adsorbed onto stainless steel according to a Temkin type of adsorption isotherm. Phalaris canariensis extract affected both anodic and cathodic electrochemical reactions with a stronger effect on the anodic ones, acting, thus, as a mixed type of inhibitor. Main compounds contained in the Phalaris canariensis extract were palmitic and oleic acids, responsible for its inhibitory properties.

Hexane extract of Persea schiedeana Ness as green corrosion inhibitor for the brass immersed in 0.5 M HCl.

The hexane extract of Persea schiedeana Ness (PSN) was analyzed as corrosion inhibitor for the brass surface immersed in 0.5 M HCl. Fourier-transform infrared spectroscopy and a gas chromatographic (GC) and mass spectrometric (MS) were used to identify the PSN extract's functional groups and compound constituents. The functional groups identified were CH 3 and CH 2 functional alkyl groups, C=O stretching vibration of aldehydes, ketones, and carbonyl groups. The GC/MS determined the presence of fatty acids in the PSN extract, where palmitic acid, oleic acid, and ethyl oleate were the major constituents. Electrochemical characterizations were conducted to observe the effect of PSN as corrosion inhibitor on the brass surface. The Rp and Rn calculated from EIS and ENA give the same behavior. Based on the OCP behavior, it was determined that the PSN works as a mix inhibitor, affecting both anodic and cathodic reactions. The corrosion current density (Icorr) suggests that the extract of PSN reduces the corrosion rate of the brass with efficiencies above 90% for all concentrations. The efficiency obtained for each PSN concentration was attributed to forming a corrosion scale of CuO and Cu 2 O , which reacted with the carboxyl group to form copper carboxylates on the metal surface.