Ion Mobility Separations Using Cocentric Architecture.

Ion mobility separations, especially using drift tube ion mobility spectrometers, are usually performed in linear channels, which can have a large footprint when extended to achieve higher resolving powers. In this work, we explored the performance of an ion mobility device with a curved architecture, which can have a more compact form. The cocentric ion mobility spectrometer (CoCIMS) manipulates ions between two cocentric surfaces containing a serpentine track. The mobility separation inside the CoCIMS is achieved using traveling waveforms (TWs). We initially evaluated the device using ion trajectory simulations using SIMION, which indicated that when ions traveled circularly inside the CoCIMS they resulted in similar resolving powers and transmitted m/z range as traveling in a straight path. We then performed experimental validation of the CoCIMS in conjunction with a TOF MS. The CoCIMS was made of two flexible printed circuit board materials folded into cocentric cylinders separated by a gap of 2.8 mm. The device was about 50 mm diameter ×152 mm long and provided 1.846 m of serpentine path length. Three sets of mixtures (Agilent tune mixture, tetraalkylammonium salts, and an eight-peptide mixture) and four traveling waveform profiles (square, sine, triangle, and sawtooth) were used. The sawtooth TW profile produced a slightly higher resolving power for the Agilent tuning mixture and tetraalkylammonium ions. The average resolving power for Agilent tune mixture ions ranged from 37 (using sawtooth TW) to 27 (using square TW). The average resolving powers ranged from 45 (sawtooth TW) to 31 (square TW) for tetraalkylammonium ions. The resolving power of the peptide mixture ions was similar among the four TW profiles and ranged from 51 to 56. The average percent error in TWCCS for the peptide mixture ions was about 0.4%. The new device showed promising results, but improvements are needed to further increase the resolving power.

Cyclable Variable Path Length Multilevel Structures for Lossless Ion Manipulations (SLIM) Platform for Enhanced Ion Mobility Separations.

Ion mobility-mass spectrometry (IMS-MS) is used to analyze complex samples and provide structural information on unknown compounds. As the complexity of samples increases, there is a need to improve the resolution of IMS-MS instruments to increase the rate of molecular identification. This work evaluated a cyclable and variable path length (and hence resolving power) multilevel Structures for Lossless Ion Manipulations (SLIM) platform to achieve a higher resolving power than what was previously possible. This new multilevel SLIM platform has eight separation levels connected by ion escalators, yielding a total path length of ∼88 m (∼11 m per level). Our new multilevel SLIM can also be operated in an "ion cycling" mode by utilizing a set of return ion escalators that transport ions from the eighth level back to the first, allowing even extendable path lengths (and higher IMS resolution). The platform has been improved to enhance ion transmission and IMS separation quality by reducing the spacing between SLIM boards. The board thickness was reduced to minimize the ions' escalator residence time. Compared to the previous generation, the new multilevel SLIM demonstrated better transmission for a set of phosphazene ions, especially for the low-mobility ions. For example, the transmission of m/z 2834 ions was improved by a factor of ∼3 in the new multilevel SLIM. The new multilevel SLIM achieved 49% better resolving powers for GRGDS1+ ions in 4 levels than our previous 4-level SLIM. The collision cross-section-based resolving power of the SLIM platform was tested using a pair of reverse sequence peptides (SDGRG1+, GRGDS1+). We achieved 1100 resolving power using 88 m of path length (i.e., 8 levels) and 1400 following an additional pass through the eight levels. Further evaluation of the multilevel SLIM demonstrated enhanced separation for positively and negatively charged brain total lipid extract samples. The new multilevel SLIM enables a tunable high resolving power for a wide range of ion mobilities and improved transmission for low-mobility ions.

A Dual-Gated Structures for Lossless Ion Manipulations-Ion Mobility Orbitrap Mass Spectrometry Platform for Combined Ultra-High-Resolution Molecular Analysis.

High-resolution ion mobility spectrometry-mass spectrometry (HR-IMS-MS) instruments have enormously advanced the ability to characterize complex biological mixtures. Unfortunately, HR-IMS and HR-MS measurements are typically performed independently due to mismatches in analysis time scales. Here, we overcome this limitation by using a dual-gated ion injection approach to couple an 11 m path length structures for lossless ion manipulations (SLIM) module to a Q-Exactive Plus Orbitrap MS platform. The dual-gate setup was implemented by placing one ion gate before the SLIM module and a second ion gate after the module. The dual-gated ion injection approach allowed the new SLIM-Orbitrap platform to simultaneously perform an 11 m SLIM separation, Orbitrap mass analysis using the highest selectable mass resolution setting (up to 140 k), and high-energy collision-induced dissociation (HCD) in ∼25 min over an m/z range of ∼1500 amu. The SLIM-Orbitrap platform was initially characterized using a mixture of standard phosphazene cations and demonstrated an average SLIM CCS resolving power (RpCCS) of ∼218 and an SLIM peak capacity of ∼156, while simultaneously obtaining high mass resolutions. SLIM-Orbitrap analysis with fragmentation was then performed on mixtures of standard peptides and two reverse peptides (SDGRG1+, GRGDS1+, and RpCCS = 305) to demonstrate the utility of combined HR-IMS-MS/MS measurements for peptide identification. Our new HR-IMS-MS/MS capability was further demonstrated by analyzing a complex lipid mixture and showcasing SLIM separations on isobaric lipids. This new SLIM-Orbitrap platform demonstrates a critical new capability for proteomics and lipidomics applications, and the high-resolution multimodal data obtained using this system establish the foundation for reference-free identification of unknown ion structures.

Development of a Structure for Lossless Ion Manipulations (SLIM) High Charge Capacity Array of Traps.

Enhancing the sensitivity of low-abundance ions in a complex mixture without sacrificing measurement throughput is highly desirable. This work demonstrates a way to greatly improve the sensitivity of ion mobility (IM)-selected ions by accumulating them in an array of high-capacity ion traps located inside a novel structures for lossless ion manipulations ion mobility spectrometer (SLIM-IMS) module. The array of ion traps used in this work consisted of seven independently controllable traps. Each trap was 386 mm long and possessed a charge capacity of ∼4.5 × 108 charges, with a linear range extending to ∼2.5 × 108 charges. Each ion trap could be used to extract a peak (or ions over a mobility range) from an ion mobility separation based on arrival time. Ions could be stored without losses for long times (>100 s) and then released all at once or one trap at a time. It was possible to accumulate large ion populations by extracting and storing ions over repeated IM separations. Enrichment of up to seven individual ion distributions could be performed using the seven independently controllable ion traps. Additionally, the ion trapping process effectively compressed ion populations into narrow peaks, which provides a greatly improved basis for subsequent ion manipulations. The array of high charge capacity ion traps provides a flexible addition to SLIM and a powerful tool for IMS-MS applications requiring high sensitivity.

Mitochondrial transplant after ischemia reperfusion promotes cellular salvage and improves lung function during ex-vivo lung perfusion.

BACKGROUND: In lung transplantation, ischemia-reperfusion injury associated with mitochondrial damage can lead to graft rejection. Intact, exogenous mitochondria provide a unique treatment option to salvage damaged cells within lung tissue. METHODS: We developed a novel method to freeze and store allogeneic mitochondria isolated from porcine heart tissue. Stored mitochondria were injected into a model of induced ischemia-reperfusion injury using porcine ex-vivo lung perfusion. Treatment benefits to immune modulation, antioxidant defense, and cellular salvage were evaluated. These findings were corroborated in human lungs undergoing ex-vivo lung perfusion. Lung tissue homogenate and primary lung endothelial cells were then used to address underlying mechanisms. RESULTS: Following cold ischemia, mitochondrial transplant reduced lung pulmonary vascular resistance and tissue pro-inflammatory signaling and cytokine secretion. Further, exogenous mitochondria reduced reactive oxygen species by-products and promoted glutathione synthesis, thereby salvaging cell viability. These results were confirmed in a human model of ex-vivo lung perfusion wherein transplanted mitochondria decreased tissue oxidative and inflammatory signaling, improving lung function. We demonstrate that transplanted mitochondria induce autophagy and suggest that bolstered autophagy may act upstream of the anti-inflammatory and antioxidant benefits. Importantly, chemical inhibitors of the MEK autophagy pathway blunted the favorable effects of mitochondrial transplant. CONCLUSIONS: These data provide direct evidence that mitochondrial transplant improves cellular health and lung function when administered during ex-vivo lung perfusion and suggest the mechanism of action may be through promotion of cellular autophagy. Data herein contribute new insights into the therapeutic potential of mitochondrial transplant to abate ischemia-reperfusion injury during lung transplant, and thus reduce graft rejection.

Procalcitonin for sepsis management: Implementation within an antimicrobial stewardship program.

PURPOSE: Clinical trials of procalcitonin (PCT)-based algorithms for antibacterial therapy have shown a reduction in antimicrobial use and improved survival. Translation of PCT algorithms to clinical settings has often been unsuccessful. We hypothesized that appropriate utilization of PCT could be improved by implementing an antimicrobial stewardship team (AST) approach to PCT testing. METHODS: We completed a pre-post intervention evaluation of adult patients admitted to the intensive care unit with a diagnosis of sepsis. The standard PCT algorithm period (SPAP) cohort included patients enrolled before dedicated AST involvement. During the AST-supported PCT algorithm period (ASPAP), the AST reviewed and provided feedback for all appropriate patients. The primary outcome was adherence to the PCT algorithm. RESULTS: Thirty-five and 57 patients were evaluated in the SPAP and ASPAP cohorts, respectively. There were no differences in demographics or infection site between the groups. Baseline PCT assessment was ordered in a larger proportion of patients in the ASPAP cohort (90% vs 57%; P = 0.0006). Follow-up PCT measurement was performed in more patients in the ASPAP cohort (76% vs 23%; P < 0.0001). Antibiotics were discontinued per algorithm in more patients in the ASPAP cohort (25/57 [44%] vs 2/35 [7%]; P < 0.0001). Patients in the ASPAP cohort experienced a shorter total duration of antibiotics (5 vs 7 days; P = 0.02), with no significant difference in length of stay or 30-day readmission or mortality between the cohorts. CONCLUSION: A PCT algorithm successfully implemented by an AST was associated with a significant decrease in total antibiotic days with no differences in mortality or length of stay.

Scalable purification of recombinant structural proteins, hagfish intermediate filament α and É£, from inclusion bodies for fiber formation.

The purpose of this study was to determine a method to purify recombinant hagfish intermediate filament proteins, alpha and gamma, in a scalable manner. The study succeeded by having an increase in protein recovery of up to 35% when comparing centrifuge purification and the developed tangential flow purification. The proteins were approximately the same purity of 70% pure but further purification increased the purity of the proteins by 16%, based on ImageJ analysis. The developed tangential flow filtration purification and final purification methods could be easily scaled up to meet industry scale purification needs. The scaled-up processes described in this study did not interfere with fiber production or formation, indicating the methods can produce usable proteins for material development.

Enoxaparin augments alpha-1-antitrypsin inhibition of TMPRSS2, a promising drug combination against COVID-19.

The cell surface serine protease Transmembrane Protease 2 (TMPRSS2) is required to cleave the spike protein of SARS-CoV-2 for viral entry into cells. We determined whether negatively-charged heparin enhanced TMPRSS2 inhibition by alpha-1-antitrypsin (AAT). TMPRSS2 activity was determined in HEK293T cells overexpressing TMPRSS2. We quantified infection of primary human airway epithelial cells (hAEc) with human coronavirus 229E (HCoV-229E) by immunostaining for the nucleocapsid protein and by the plaque assay. Detailed molecular modeling was undertaken with the heparin-TMPRSS2-AAT ternary complex. Enoxaparin enhanced AAT inhibition of both TMPRSS2 activity and infection of hAEc with HCoV-229E. Underlying these findings, detailed molecular modeling revealed that: (i) the reactive center loop of AAT adopts an inhibitory-competent conformation compared with the crystal structure of TMPRSS2 bound to an exogenous (nafamostat) or endogenous (HAI-2) TMPRSS2 inhibitor and (ii) negatively-charged heparin bridges adjacent electropositive patches at the TMPRSS2-AAT interface, neutralizing otherwise repulsive forces. In conclusion, enoxaparin enhances AAT inhibition of both TMPRSS2 and coronavirus infection. Such host-directed therapy is less likely to be affected by SARS-CoV-2 mutations. Furthermore, given the known anti-inflammatory activities of both AAT and heparin, this form of treatment may target both the virus and the excessive inflammatory consequences of severe COVID-19.

A Miniature Multilevel Structures for Lossless Ion Manipulations Ion Mobility Spectrometer with Wide Mobility Range Separation Capabilities.

Ion mobility spectrometry employing structures for lossless ion manipulations (SLIM-IMS) is an attractive gas-phase separation technique due to its ability to achieve unprecedented effective ion path lengths (>1 km) and IMS resolving powers in a small footprint. The emergence of multilevel SLIM technology, where ions are transferred between vertically stacked SLIM electrode surfaces, has subsequently allowed for ultralong single-pass path lengths (>40 m) to be achieved, enabling ultrahigh resolution IMS measurements to be performed over the entire mobility range in a single experiment. Here, we report on the development of a 1 m path length miniature SLIM module (miniSLIM) based on multilevel SLIM technology. Ion trajectory simulations were used to optimize SLIM board spacings and SLIM board thicknesses, and a new method of efficiently transferring ions between SLIM levels using asymmetric traveling waves (TWs) was demonstrated. We experimentally characterized the performance of the miniSLIM IMS-MS relative to a drift tube IMS-MS using Agilent tuning mixture cations and tetraalkylammonium cations. The miniSLIM achieved a resolving power of up to 131 (CCS/ΔCCS), which is ∼1.5× higher than achievable with a 78 cm path length drift tube IMS. Additionally, the entire ion mobility range was successfully transmitted in a single separation. We also demonstrated the miniSLIM's performance as a standalone IMS system (i.e., without MS), which showed baseline separation between all AgTM cations and a clear differentiation between different charge states of a standard peptide mixture. Overall, the miniSLIM provides a compact alternative to high performance IMS instruments possessing similar path lengths.

Molecular Dynamics of Synthetic Flagelliform Silk Fiber Assembly.

In order to better understand the relationship between Flagelliform (Flag) spider silk molecular structural organization and the mechanisms of fiber assembly, it was designed and produced the Nephilengys cruentata Flag spidroin analogue rNcFlag2222. The recombinant proteins are composed by the elastic repetitive glycine-rich motifs (GPGGX/GGX) and the spacer region, rich in hydrophilic charged amino acids, present at the native silk spidroin. Using different approaches for nanomolecular protein analysis, the structural data of rNcFlag2222 recombinant proteins were compared in its fibrillar and in its fully solvated states. Based on the results was possible to identify the molecular structural dynamics of NcFlag2222 prior to and after fiber formation. Overal rNcFlag2222 shows a mixture of semiflexible and rigid conformations, characterized mostly by the presence of PPII, ß-turn and ß-sheet. These results agree with previous studies and bring insights about the molecular mechanisms that might driven Flag silk fibers assembly and elastomeric behavior.

The next generation of protein super-fibres: robust recombinant production and recovery of hagfish intermediate filament proteins with fibre spinning and mechanical-structural characterizations.

Native hagfish intermediate filament proteins have impressive mechanical properties. However, using these native fibres for any application is impractical, necessitating their recombinant production. In the only literature report on the proteins (denoted α and É£), heterologous expression levels, using E. coli, were low and no attempts were made to optimize expression, explore wet-spinning, or spin the two proteins individually into fibres. Reported here is the high production (~8 g l-1 of dry protein) of the hagfish intermediate filament proteins, with yields orders of magnitude higher (325-1000×) than previous reports. The proteins were spun into fibres individually and in their native-like 1:1 ratio. For all fibres, the hallmark α-helix to ß-sheet conversion occurred after draw-processing. The native-like 1:1 ratio fibres achieved the highest average tensile strength in this study at nearly 200 MPa with an elastic modulus of 5.7 GPa, representing the highest tensile strength reported for these proteins without chemical cross-linking. Interestingly, the recombinant α protein achieved nearly the same mechanical properties when spun as a homopolymeric fibre. These results suggest that varying the two protein ratios beyond the natural 1:1 ratio will allow a high degree of tunability. With robust heterologous expression and purification established, optimizing fibre spinning will be accelerated compared to difficult to produce proteins such as spider silks.

Large scale production of synthetic spider silk proteins in Escherichia coli.

Spider silk, which has remarkable mechanical properties, is a natural protein fiber produced by spiders. Spiders cannot be farmed because of their cannibalistic and territorial nature. Hence, large amounts of spider silk cannot be produced from spiders. Genetic engineering is an alternative approach to produce large quantities of spider silk. Our group has produced synthetic spider silk proteins in E. coli to study structure/function and to produce biomaterials comparable to the silks produced by orb-weaving spiders. Here we give a detailed description of our cloning, expression, and purification methods of synthetic spider silk proteins ranging from ~30 to ~200 kDa. We have cloned the relevant genes of the spider Nephila clavipes and introduced them into bacteria to produce synthetic spider silk proteins using small and large-scale bioreactors. We have optimized the fermentation process, and we have developed protein purification methods as well. The purified proteins are spun into fibers and are used to make alternative materials like films and adhesives with various possible commercial applications.

Ion Mobility Spectrometry with High Ion Utilization Efficiency Using Traveling Wave-Based Structures for Lossless Ion Manipulations.

Ion packets introduced from gates, ion funnel traps, and other conventional ion injection mechanisms produce ion pulse widths typically around a few microseconds or less for ion mobility spectrometry (IMS)-based separations on the order of 100 milliseconds. When such ion injection techniques are coupled with ultralong path length traveling wave (TW)-based IMS separations (i.e., on the order of seconds) using structures for lossless ion manipulations (SLIMs), typically very low ion utilization efficiency is achieved for continuous ion sources [e.g., electrospray ionization (ESI)]. Even with the ability to trap and accumulate much larger populations of ions than being conventionally feasible over longer time periods in SLIM devices, the subsequent long separations lead to overall low ion utilization. Here, we report the use of a highly flexible SLIM arrangement, enabling concurrent ion accumulation and separation and achieving near-complete ion utilization with ESI. We characterize the ion accumulation process in SLIM, demonstrate >98% ion utilization, and show both increased signal intensities and measurement throughput. This approach is envisioned to have broad utility to applications, for example, involving the fast detection of trace chemical species.

Ultra-High-Resolution Ion Mobility Separations Over Extended Path Lengths and Mobility Ranges Achieved using a Multilevel Structures for Lossless Ion Manipulations Module.

Over the past few years, structures for lossless ion manipulations (SLIM) have used traveling waves (TWs) to move ions over long serpentine paths that can be further lengthened by routing the ions through multiple passages of the same path. Such SLIM "multipass" separations provide unprecedentedly high ion mobility resolving powers but are ultimately limited in their ion mobility range because of the range of mobilities spanned in a single pass; that is, higher mobility ions ultimately "overtake" and "lap" lower mobility ions that have experienced fewer passes, convoluting their arrival time distribution at the detector. To achieve ultrahigh resolution separations over broader mobility ranges, we have developed a new multilevel SLIM possessing multiple stacked serpentine paths. Ions are transferred between SLIM levels through apertures (or ion escalators) in the SLIM surfaces. The initial multilevel SLIM module incorporates four levels and three interlevel ion escalator passages, providing a total path length of 43.2 m. Using the full path length and helium buffer gas, high resolution separations were achieved for Agilent tuning mixture phosphazene ions over a broad mobility range (K0 ≈ 3.0 to 1.2 cm2/(V*s)). High sensitivity was achieved using "in-SLIM" ion accumulation over an extended trapping region of the first SLIM level. High transmission efficiency of ions over a broad mobility range (e.g., K0 ≈ 3.0 to 1.67 cm2/(V*s)) was achieved, with transmission efficiency rolling off for the lower mobility ions (e.g., K0 ≈ 1.2 cm2/(V*s)). Resolving powers of up to ∼560 were achieved using all four ion levels to separate reverse peptides (SDGRG1+ and GRGDS1+). A complex mixture of phosphopeptides showed similar coverage could be achieved using one or all four SLIM levels, and doubly charged phosphosite isomers not significantly separated using one SLIM level were well resolved when four levels were used. The new multilevel SLIM technology thus enables wider mobility range ultrahigh-resolution ion mobility separations and expands on the ability of SLIM to obtain improved separations of complex mixtures with high sensitivity.

Effectiveness of Shorter Versus Longer Durations of Therapy for Common Inpatient Infections Associated With Bacteremia: A Multicenter, Propensity-Weighted Cohort Study.

BACKGROUND: National guidelines for pneumonia (PNA), urinary tract infection (UTI), and acute bacterial skin and skin structure infection (ABSSSI) do not address treatment duration for infections associated with bacteremia. We evaluated clinical outcomes of patients receiving shorter (5-9 days) versus longer (10-15 days) duration of antibiotics. METHODS: This was a multicenter retrospective cohort study of inpatients with uncomplicated PNA, UTI, or ABSSSI and associated bacteremia. The primary outcome was clinical failure, a composite of rehospitalization, reinitiation of antibiotics, or all-cause mortality within 30 days of antibiotic completion. Secondary outcomes included individual components of the primary outcome, Clostridioides difficile infection, and antibiotic-related adverse effects necessitating change in therapy. A propensity score-weighted logistic regression model was used to mitigate potential bias associated with nonrandom assignment of treatment duration. RESULTS: Of 408 patients included, 123 received a shorter treatment duration (median 8 days) and 285 received a longer duration (median 13 days). In the propensity-weighted analysis, the probability of the primary outcome was 13.5% in the shorter group and 11.1% in the longer group (average treatment effect, 2.4%; odds ratio [OR], 1.25; 95% confidence interval [CI], .65-2.40; P = .505). However, shorter courses were associated with higher probability of restarting antibiotics (OR, 1.62; 95% CI, 1.01-2.61; P = .046) and C. difficile infection (OR, 4.01; 95% CI, 2.21-7.59; P < .0001). CONCLUSIONS: Shorter courses of antibiotic treatment for PNA, UTI, and ABSSSI with bacteremia were not associated with increased overall risk of clinical failure; however, prospective studies are needed to further evaluate the effectiveness of shorter treatment durations.

Traveling-Wave-Based Electrodynamic Switch for Concurrent Dual-Polarity Ion Manipulations in Structures for Lossless Ion Manipulations.

We describe the development of a dual-polarity traveling-wave (TW) structures for lossless ion manipulations (SLIM) ion mobility spectrometry (IMS) device capable of switching both positive and negative ions that are traveling simultaneously along the same path to different regions of the SLIM. Through simulations, the routing efficiency of the SLIM TW switch was compared to a SLIM direct-current-based (DC) switch developed previously for IMS-MS. We also report on the initial experimental evaluation of a dual-polarity SLIM platform, which uses the TW-based ion switch to achieve higher resolution multipass serpentine ultralong path with extended routing (SUPER) IMS separations. Overall, these results show that the dual-polarity TW switch is not only as effective as DC switching in terms of routing efficiency but also is agnostic to the polarity of the ions being routed.

Silkworms with Spider Silklike Fibers Using Synthetic Silkworm Chow Containing Calcium Lignosulfonate, Carbon Nanotubes, and Graphene.

Silkworm silk has become increasingly relevant for material applications. However, the industry as a whole is retracting because of problems with mass production. One of the key problems is the inconsistent properties of the silk. A means by which to improve the silk material properties is through enhanced sericulture techniques. One possible technique is altering the feed of the silkworms to include single-wall carbon nanotubes (SWNTs) or graphene (GR). Recently published results have demonstrated substantial improvement in fiber mechanical properties. However, the effect of the surfactant used to incorporate those materials into the feed on the fiber mechanical properties in comparison to normal silkworm silk has not been studied or reported. Thus, the total effect of feeding the SWNT and GR in the presence of surfactants on silkworms is not understood. Our study focuses on the surfactant [calcium lignosulfonate (LGS)] and demonstrates that it alone results in appreciable improvement of mechanical properties in comparison to nontreated silkworm silk. Furthermore, our study demonstrates that mixing the LGS, SWNT, and GR directly into the artificial diet of silkworms yields improved mechanical properties without decline below the control silk at high doses of SWNT or GR. Combined, we present evidence that mixing surfactants, in this case LGS, directly with the diet of silkworms creates a high-quality fiber product that can exceed 1 GPa in tensile strength. With the addition of nanocarbons, either SWNT or GR, the improvement is even greater and consistently surpasses control fibers. However, feeding LGS alone is a more economical and practical choice to consistently improve the mechanical properties of silkworm fiber.

SLIM Ultrahigh Resolution Ion Mobility Spectrometry Separations of Isotopologues and Isotopomers Reveal Mobility Shifts due to Mass Distribution Changes.

We report on separations of ion isotopologues and isotopomers using ultrahigh-resolution traveling wave-based Structures for Lossless Ion Manipulations with serpentine ultralong path and extended routing ion mobility spectrometry coupled to mass spectrometry (SLIM SUPER IMS-MS). Mobility separations of ions from the naturally occurring ion isotopic envelopes (e.g., [M], [M+1], [M+2], ... ions) showed the first and second isotopic peaks (i.e., [M+1] and [M+2]) for various tetraalkylammonium ions could be resolved from their respective monoisotopic ion peak ([M]) after SLIM SUPER IMS with resolving powers of ∼400-600. Similar separations were obtained for other compounds (e.g., tetrapeptide ions). Greater separation was obtained using argon versus helium drift gas, as expected from the greater reduced mass contribution to ion mobility described by the Mason-Schamp relationship. To more directly explore the role of isotopic substitutions, we studied a mixture of specific isotopically substituted (15N, 13C, and 2H) protonated arginine isotopologues. While the separations in nitrogen were primarily due to their reduced mass differences, similar to the naturally occurring isotopologues, their separations in helium, where higher resolving powers could also be achieved, revealed distinct additional relative mobility shifts. These shifts appeared correlated, after correction for the reduced mass contribution, with changes in the ion center of mass due to the different locations of heavy atom substitutions. The origin of these apparent mass distribution-induced mobility shifts was then further explored using a mixture of Iodoacetyl Tandem Mass Tag (iodoTMT) isotopomers (i.e., each having the same exact mass, but with different isotopic substitution sites). Again, the observed mobility shifts appeared correlated with changes in the ion center of mass leading to multiple monoisotopic mobilities being observed for some isotopomers (up to a ∼0.04% difference in mobility). These mobility shifts thus appear to reflect details of the ion structure, derived from the changes due to ion rotation impacting collision frequency or momentum transfer, and highlight the potential for new approaches for ion structural characterization.

CRISPR/Cas9 Initiated Transgenic Silkworms as a Natural Spinner of Spider Silk.

Using transgenic silkworms with their natural spinning apparatus has proven to be a promising way to spin spider silk-like fibers. The challenges are incorporating native-size spider silk proteins and achieving an inheritable transgenic silkworm strain. In this study, a CRISPR/Cas9 initiated fixed-point strategy was used to successfully incorporate spider silk protein genes into the Bombyx mori genome. Native-size spider silk genes (up to 10 kb) were inserted into an intron of the fibroin heavy or light chain (FibH or FibL) ensuring that any sequence changes induced by the CRISPR/Cas9 would not impact protein production. The resulting fibers are as strong as native spider silks (1.2 GPa tensile strength). The transgenic silkworms have been tracked for several generations with normal inheritance of the transgenes. This strategy demonstrates the feasibility of using silkworms as a natural spider silk spinner for industrial production of high-performance fibers.