Development of a Near-Infrared Spectroscopy (NIRS)-Based Characterization Approach for Inherent Powder Blend Heterogeneity in Direct Compression Formulations.

With the advent of continuous direct compression (CDC) process, it becomes increasingly desirable to characterize inherent powder blend heterogeneity at a small batch scale for a robust and CDC-amenable formulation. To accomplish this goal, a near infrared spectroscopy (NIRS)-based characterization approach was developed and implemented on multiple direct compression (DC) blends in this study, with the intended purpose of complementing existing formulation development tools and enabling to build an early CMC data package for late-phased process analytical technology (PAT) method development. Three fumaric acid DC blends, designed to harbor varied degrees of inherent blend heterogeneity, were employed. Near infrared spectral data were collected on a kg-scale batch blender via both time- and angle-based triggering modes. The time-triggered data were used to investigate the blending heterogeneity with respect to rotation angles, while the angle-triggered data were used to provide blending variability characterization and compare against off-line HPLC-based results. The time-triggered data revealed that the greatest blend variability was observed between revolutions, while the blending variability within a single revolution stayed relatively low with respect to rotation angles. This confirmed earlier literature findings that the bottom layer of powder blends tends to move with the blender within each revolution, and the most intense powder mixing takes place across revolutions. This also indicates the use of blending speed and the number of co-adds are not able to increase sampling volume to improve signal-to-noise ratio under a tumble-bin blender as what were typically done in a feedframe application. The angle-triggered data showed that there is a consistent trend between NIRS and HPLC-based methods on characterizing blend heterogeneity across the blends at a given sample size. This study contributes to establishing NIRS as a potential characterization approach for inherent powder blend heterogeneity for early R&D. It also highlights the promise of continuous characterization of inherent powder blend heterogeneity from gram scale to mini-batch CDC scale.

A comprehensive analysis and optimization of continuous twin-screw granulation processes via sequential experimentation strategy.

Nowadays twin-screw granulation has been emerging as an attractive continuous wet granulation technique. This study was geared towards better process design and understanding with emphasis on bridging the knowledge gap between input and output variables by employing sequential experimentation strategy. A low-dose formulation for granulation experiments contained anhydrous caffeine as the model drug. In the first phase of parameter screening, D-optimal design and stepwise regression were leveraged to develop interaction models following the examination of various quantitative and qualitative factors of potential importance. To maximize the design space dictated by predefined quality target values, several variables were fixed at optimum levels: 700 rpm screw speed, 60° kneading element staggering angle, 5 kneading elements and distributive feed screw in the screw configuration. In the second phase of characterization, response surface design was utilized to investigate the dependence of critical quality attributes of granules and tablets on selected critical process parameters (L/S ratio, throughput and barrel temperature). The results indicated that the influence of throughput and barrel temperature was relatively inferior to L/S ratio. Higher degree of liquid saturation led to granules with narrower size distribution, smaller porosity and enhanced flowability and tablets with declining tensile strength yet slackened drug release.