Derivatization of Hyaluronan to Target Neuroblastoma and Neuroglioma Expressing CD44.

Therapeutics for actively targeting over-expressed receptors are of great interest because the majority of diseased tissues originate from normal cells and do not possess a unique receptor from which they can be differentiated. One such receptor is CD44, which has been shown to be highly overexpressed in many breast cancers and other types of cancer cells. While CD44 has been documented to express low levels in normal adult neurons, astrocytes, and microglia, this receptor may be overexpressed by neuroblastoma and neuroglioma. If differential expression exists between normal and cancerous cells, hyaluronan (HA) could be a useful carrier that targets carcinomas. Thus, HA was conjugated with resveratrol (HA-R), and its efficacy was tested on cortical-neuroblastoma hybrid, neuroblastoma, and neuroglioma cells. Confocal and flow cytometry showed these cells express CD44 and are able to bind and uptake HA-R. The toxicity of HA-R correlated well with CD44 expression in this study. Therefore, conjugating resveratrol and other chemotherapeutics to HA could minimize the side effects for normal cells within the brain and nervous system and could be a viable strategy for developing targeted therapies.

Tissue Adhesive, Biocompatible, Antioxidant, and Antibacterial Hydrogels Based on Tannic Acid and Fungal-Derived Carboxymethyl Chitosan for Wound-Dressing Applications.

This study aimed to develop hydrogels for tissue adhesion that are biocompatible, antioxidant, and antibacterial. We achieved this by using tannic acid (TA) and fungal-derived carboxymethyl chitosan (FCMCS) incorporated in a polyacrylamide (PAM) network using free-radical polymerization. The concentration of TA greatly influenced the physicochemical and biological properties of the hydrogels. Scanning electron microscopy showed that the nanoporous structure of the FCMCS hydrogel was retained with the addition of TA, resulting in a nanoporous surface structure. Equilibrium-swelling experiments revealed that increasing the concentration of TA significantly improved water uptake capacity. Antioxidant radical-scavenging assays and porcine skin adhesion tests confirmed the excellent adhesive properties of the hydrogels, with adhesion strengths of up to 39.8 ± 1.2 kPa for 1.0TA-FCMCS due to the presence of abundant phenolic groups on TA. The hydrogels were also found to be biocompatible with skin fibroblast cells. Furthermore, the presence of TA significantly enhanced the antibacterial properties of the hydrogels against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. Therefore, the developed drug-free antibacterial and tissue-adhesive hydrogels can potentially be used as wound dressings for infected wounds.

Hyaluronic acid-quercetin pendant drug conjugate for wound healing applications.

In this study, a simple approach was used for the synthesis of a water-soluble hyaluronic acid-quercetin (HA-Q) pendant drug conjugate to evaluate its potential wound-healing properties. The HA-Q conjugation was confirmed by Fourier-transform infrared spectroscopy (FTIR), ultraviolet-visible spectrophotometry (UV-Vis), and nuclear magnetic resonance (NMR) spectroscopy techniques. To produce the HA-Q, quercetin was conjugated on the HA backbone to the extent of 44.7 %. The HA-Q conjugate was soluble in water and a solution with a concentration of 20 mg/ml was prepared. The conjugate exhibited good biocompatibility and supported the growth and cell migration of skin fibroblast cells. HA-Q presented improved radical scavenging capacity compared to quercetin (Q) alone. The overall results confirmed the potential role of HA-Q in wound healing applications.

A review on directional muscle cell growth in scaffolding biomaterials with aligned porous structures for cultivated meat production.

Scaffolds suitable for use in food products are essential in cultured meat production. Simultaneously, efforts are being undertaken to strengthen the scaffolding to improve cell proliferation, differentiation, and tissue formation. Muscle cells proliferate and differentiate according to the directional patterns of the scaffold, similar to natural tissue and native muscle tissue. Therefore, establishing an aligned pattern in the scaffolding architecture is vital for cultured meat applications. Recent studies on the fabrication of scaffolds with aligned porosity structures and their utility in manufacturing cultured meat are highlighted in this review. In addition, the directional growth of muscle cells in terms of proliferation and differentiation has also been explored, along with the aligned scaffolding architectures. The aligned porosity architecture of the scaffolds supports the texture and quality of meat-like structures. Although it is difficult to build adequate scaffolds for culturing meat manufactured from diverse biopolymers, it is necessary to develop novel methods to create aligned scaffolding structures. Furthermore, to avoid animal slaughter in the future, it will be imperative to adopt non-animal-based biomaterials, growth factors, and serum-free media conditions for quality meat production.

pH Sensitive Drug Delivery Behavior of Palmyra Palm Kernel Hydrogel of Chemotherapeutic Agent.

This study examined the gel behavior of naturally-occurring palmyra palm kernel (PPK). Due to the presence of polysaccharide in PPK hydrogels, they exhibit excellent swelling behavior in response to pH. Chemotherapeutic drug 5-fluorouracil (5-FU) was encapsulated in these gels using an equilibrium swelling technique. It was found that 5-FU had an encapsulation efficiency of up to 62%. To demonstrate the drug stability in the gels, the PPK hydrogels were characterized using fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction. The results showed that the PPK hydrogel matrix contained molecularly dispersed 5-FU drug. The PPK hydrogel exhibited a denser structure and a rough surface, according to images obtained by scanning electron microscopy. In vitro release tests were carried out at pH 1.2 (gastric fluid) and 7.4 (intestinal fluid). The efficacy of the encapsulation and the release patterns were influenced by the network topology of the PPK hydrogel. The release patterns showed that 5-FU was released gradually over a time internal of more than 12 h. The findings suggest that naturally-occurring PPK hydrogels loaded with chemotherapeutic drugs could be employed to treat colon cancer.

Effect of Grape Seed Extract on Gelatin-Based Edible 3D-Hydrogels for Cultured Meat Application.

Cell-cultured meat, which is artificial meat made by in vitro cultivation of animal-derived cells, has attracted a lot of interest as a potential source of protein in the future. Porous hydrogels are crucial components that can be used as an artificial extracellular matrix (ECM) to provide cell growth for generating cultured meat. In this study, we highlight the effects of grape seed extract (proanthocyanidins, PC) on the physicochemical and biological functions (bovine satellite muscle cell (BSC) growth and adhesion) of an edible gelatin (GL)-based hydrogel. The freeze-dried hydrogels had good compressive characteristics with pore sizes ranging from 100 to 300 µm. BSCs were able to grow and attach to porous GL-PC hydrogels. These studies suggested that the developed hydrogels using edible materials and made by employing a low-cost method may serve in the cell growth of muscle cells for cultured meat applications.

Tissue Adhesive, Self-Healing, Biocompatible, Hemostasis, and Antibacterial Properties of Fungal-Derived Carboxymethyl Chitosan-Polydopamine Hydrogels.

In this work, fungal mushroom-derived carboxymethyl chitosan-polydopamine hydrogels (FCMCS-PDA) with multifunctionality (tissue adhesive, hemostasis, self-healing, and antibacterial properties) were developed for wound dressing applications. The hydrogel is obtained through dynamic Schiff base cross-linking and hydrogen bonds between FCMCS-PDA and covalently cross-linked polyacrylamide (PAM) networks. The FCMCS-PDA-PAM hydrogels have a good swelling ratio, biodegradable properties, excellent mechanical properties, and a highly interconnected porous structure with PDA microfibrils. Interestingly, the PDA microfibrils were formed along with FCMCS fibers in the hydrogel networks, which has a high impact on the biological performance of hydrogels. The maximum adhesion strength of the hydrogel to porcine skin was achieved at about 29.6 ± 2.9 kPa. The hydrogel had good self-healing and recoverable properties. The PDA-containing hydrogels show good antibacterial properties on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria. Moreover, the adhesive hydrogels depicted good viability and attachment of skin fibroblasts and keratinocyte cells. Importantly, FCMCS and PDA combined resulted in fast blood coagulation within 60 s. Hence, the adhesive hydrogel with multifunctionality has excellent potential as a wound dressing material for infected wounds.

Strychnos Potatorum L. Seed Polysaccharide-Based Stimuli-Responsive Hydrogels and Their Silver Nanocomposites for the Controlled Release of Chemotherapeutics and Antimicrobial Applications.

Natural Strychnos potatorum L. (SPL) polysaccharide-based dual-responsive semi-IPN-type (SPL-DMA) hydrogels have been fabricated using dimethylaminoethyl methacrylate by simple free radical polymerization. Furthermore, a facial and eco-friendly method has been developed for the green synthesis of silver nanoparticles on SPL-DMA hydrogel templates (SPL-DMA-Ag) using an aqueous leaf extract of Carissa spinarum (as a bioreducing agent). SPL-DMA and SPL-DMA-Ag were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetry analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and evaluated network parameters. 5-Fluorouracil and doxorubicin were successfully encapsulated, and in vitro drug release studies were performed at pH values of 1.2 and 7.4 and at 25 and 37 °C. To understand the drug release mechanism of SPL-DMA hydrogels, various kinetic parameters were calculated. Biocompatibility and anticancer activities of SPL-DMA hydrogels were proved by an antioxidant activity study and in vitro cell viability studies against HeLa and 3T3-L1 cell lines. SPL-DMA-Ag hydrogels were used for antibacterial application.

Dual Responsive poly(vinyl caprolactam)-Based Nanogels for Tunable Intracellular Doxorubicin Delivery in Cancer Cells.

In this work, doxorubicin (Dox)-encapsulated poly(vinyl caprolactam) (PVCL)-based three-dimensional nanogel networks were developed and were crosslinked with disulfide linkages. The nanogels degrade rapidly to low molecular weight chains in the presence of the typical intracellular concentration of glutathione. Doxorubicin (Dox) was successfully encapsulated into these nanogels. The nanogels have a high drug loading of 49% and can be tailored to 182 nm to deliver themselves to the targeted cells and release Dox under dual stimuli conditions, such as redox and temperature. By evaluating cell viability in the HepG2 cell line, we observed that Dox-loaded nanogels effectively killed the cancer cell. Fluorescence microscopy results show that the nanogels could easily be internalized with HepG2 cells. The results confirm that the nanogels destabilized in intracellular cytosol via degradation of disulfide bonds in nanogels networks and release of the Dox nearby the nucleus. These carriers could be promising for cancer drug delivery.

Bacterial Cellulose and Its Applications.

The sharp increase in the use of cellulose seems to be in increasing demand in wood; much more research related to sustainable or alternative materials is necessary as a lot of the arable land and natural resources use is unsustainable. In accordance, attention has focused on bacterial cellulose as a new functional material. It possesses a three-dimensional, gelatinous structure consisting of cellulose with mechanical and thermal properties. Moreover, while a plant-originated cellulose is composed of cellulose, hemi-cellulose, and lignin, bacterial cellulose attributable to the composition of a pure cellulose nanofiber mesh spun is not necessary in the elimination of other components. Moreover, due to its hydrophilic nature caused by binding water, consequently being a hydrogel as well as biocompatibility, it has only not only used in medical fields including artificial skin, cartilage, vessel, and wound dressing, but also in delivery; some products have even been commercialized. In addition, it is widely used in various technologies including food, paper, textile, electronic and electrical applications, and is being considered as a highly versatile green material with tremendous potential. However, many efforts have been conducted for the evolution of novel and sophisticated materials with environmental affinity, which accompany the empowerment and enhancement of specific properties. In this review article, we summarized only industry and research status regarding BC and contemplated its potential in the use of BC.

Revised Manuscript with Corrections: Polyurethane-Based Conductive Composites: From Synthesis to Applications.

The purpose of this review article is to outline the extended applications of polyurethane (PU)-based nanocomposites incorporated with conductive polymeric particles as well as to condense an outline on the chemistry and fabrication of polyurethanes (PUs). Additionally, we discuss related research trends of PU-based conducting materials for EMI shielding, sensors, coating, films, and foams, in particular those from the past 10 years. PU is generally an electrical insulator and behaves as a dielectric material. The electrical conductivity of PU is imparted by the addition of metal nanoparticles, and increases with the enhancing aspect ratio and ordering in structure, as happens in the case of conducting polymer fibrils or reduced graphene oxide (rGO). Nanocomposites with good electrical conductivity exhibit noticeable changes based on the remarkable electric properties of nanomaterials such as graphene, RGO, and multi-walled carbon nanotubes (MWCNTs). Recently, conducting polymers, including PANI, PPY, PTh, and their derivatives, have been popularly engaged as incorporated fillers into PU substrates. This review also discusses additional challenges and future-oriented perspectives combined with here-and-now practicableness.

Recent biotechnological developments in reshaping the microalgal genome: A signal for green recovery in biorefinery practices.

The use of renewable energy sources as a substitute for nonrenewable fossil fuels is urgently required. Algae biorefinery platform provides an excellent alternate to overcome future energy problems. However, to let this viable biomass be competent with existing feedstocks, it is necessary to exploit genetic manipulation and improvement in upstream and downstream platforms for optimal bio-product recovery. Furthermore, the techno-economic strategies further maximize metabolites production for biofuel, biohydrogen, and other industrial applications. The experimental methodologies in algal photobioreactor promote high biomass production, enriched in lipid and starch content in limited environmental conditions. This review presents an optimization framework combining genetic manipulation methods to simulate microalgal growth dynamics, understand the complexity of algal biorefinery to scale up, and identify green strategies for techno-economic feasibility of algae for biomass conversion. Overall, the algal biorefinery opens up new possibilities for the valorization of algae biomass and the synthesis of various novel products.

Fabrication of Eco-Friendly Polyelectrolyte Membranes Based on Sulfonate Grafted Sodium Alginate for Drug Delivery, Toxic Metal Ion Removal and Fuel Cell Applications.

Polyelectrolyte membranes (PEMs) are a novel type of material that is in high demand in health, energy and environmental sectors. If environmentally benign materials are created with biodegradable ones, PEMs can evolve into practical technology. In this work, we have fabricated environmentally safe and economic PEMs based on sulfonate grafted sodium alginate (SA) and poly(vinyl alcohol) (PVA). In the first step, 2-acrylamido-2-methyl-1-propanesulphonic acid (AMPS) and sodium 4-vinylbenzene sulfonate (SVBS) are grafted on to SA by utilizing the simple free radical polymerization technique. Graft copolymers (SA-g-AMPS and SA-g-SVBS) were characterized by 1H NMR, FTIR, XRD and DSC. In the second step, sulfonated SA was successfully blended with PVA to fabricate PEMs for the in vitro controlled release of 5-fluorouracil (anti-cancer drug) at pH 1.2 and 7.4 and to remove copper (II) ions from aqueous media. Moreover, phosphomolybdic acids (PMAs) incorporated with composite PEMs were developed to evaluate fuel cell characteristics, i.e., ion exchange capacity, oxidative stability, proton conductivity and methanol permeability. Fabricated PEMs are characterized by the FTIR, ATR-FTIR, XRD, SEM and EDAX. PMA was incorporated. PEMs demonstrated maximum encapsulation efficiency of 5FU, i.e., 78 ± 2.3%, and released the drug maximum in pH 7.4 buffer. The maximum Cu(II) removal was observed at 188.91 and 181.22 mg.g-1. PMA incorporated with PEMs exhibited significant proton conductivity (59.23 and 45.66 mS/cm) and low methanol permeability (2.19 and 2.04 × 10-6 cm2/s).

Fungal-derived carboxymethyl chitosan blended with polyvinyl alcohol as membranes for wound dressings.

Multifunctional blend membranes composed of poly (vinyl alcohol) (PVA) and fungal mushroom-derived carboxymethyl chitosan (F-CMCS) were produced using a simple solution casting technique for wound dressing applications. The structural interactions between PVA and F-CMCS were confirmed by Fourier infrared spectroscopy. The crystallinity of the membranes was examined by X-ray diffraction. Field emission scanning electron microscopy confirmed the homogeneity and coarser texture with a porous-like network in the internal structure of the membranes. The hydrophilicity, swelling, and degradation of the fabricated membranes were examined according to the F-CMCS content. The PVA/F-CMCS membrane displayed potential antibacterial activity against Escherichia coli (gram-negative) and Staphylococcus (gram-positive) bacteria. An in vitro cell study of skin fibroblasts and keratinocytes on the PVA/F-CMCS membranes confirmed the biocompatibility. The hemolysis assay demonstrated the hemocompatibility of the developed membranes. The antibacterial, biocompatibility, and good hemolysis in the PVA membrane were influenced by the F-CMCS composition ratio up to 40%. The all-inclusive properties of the PVA/F-CMCS membranes highlight its potential use in wound dressing applications.

Physicochemical characterization, drug release, and biocompatibility evaluation of carboxymethyl cellulose-based hydrogels reinforced with sepiolite nanoclay.

Polymer-clay nanocomposite hydrogel films (PCNCHFs) were prepared from caboxymethyl cellulose, polyvinylpyrrolidone, agar and nanosepiolite clay (0, 0.3, 0.5, 0.7, 0.9 and 1.5% reinforcement) by treating thermally in a simple, rapid, and inexpensive route. The PCNCHFs and its 5-fluorouracil (FU)-loaded composites (PCNCHFs@FU) were tested for FU release and characterized by FTIR, XRD, FE-SEM, EDX, DSC, and TGA analyses to investigate their structural, morphological, and thermal properties. The nanosepiolite-loaded polymer composites (PCNCHF1 to PCNCHF5) exhibited higher tensile strength than the pristine polymer hydrogel (PCNCHF0); consequently, the thermal properties (glass- and melting-transition) were improved. The PCNCHFs@FU demonstrated prolonged FU release at pH 7.4 for 32 h. The biocompatibility of PCNCHFs was tested against human skin fibroblast (CCDK) cells. The viability of cells exposed to all PCNCHFs was >95% after 72 h of culture. The live/dead assay show the proliferation of fibroblast cells, confirming the biocompatibility of the hydrogels. The pH-sensitive PCNCHFs@FU release could be suitable for drug release in cancer therapy, and the developed PCNCHFs may also be useful for tissue engineering, food packaging, and other biological applications.

Tragacanth gum-based multifunctional hydrogels and green synthesis of their silver nanocomposites for drug delivery and inactivation of multidrug resistant bacteria.

This study investigated natural polymer-based stimuli-responsive hydrogels (TGIAVE) and their silver nanocomposites (TGIAVE-Ag). The hydrogels were composed of tragacanth gum, N-isopropyl acrylamide, and 2-(vinlyoxy) ethanol and were prepared via simple redox polymerization using N,N'-methylene-bis-acrylamide as a crosslinker and potassium persulfate as an initiator. The TGIAVE-Ag were synthesized via a green method involving an aqueous extract of Terminalia bellirica seeds. Structural, thermal, crystallinity, morphology, and size characteristics of the TGIAVE and TGIAVE-Ag were investigated by FTIR, UV-Vis, XRD, DSC, SEM, EDS, DLS, and TEM. To understand the physicochemical interaction and diffusion characteristics of TGIAVEs, network parameters such as zero-order, first-order, Hixson-Crowell, Higuchi, and Korsmeyer-Peppas values were calculated by assessing swelling data. TGIAVE hydrogels at pH 1.2 and 7.4 and temperatures of 25 and 37 °C may be used for time-dependent controlled release of 5-fluorouracil, an anticancer drug, TGIAVE-Ag may be applied for the inactivation of multidrug resistant (MDR) bacteria.

Targeting integrins for cancer management using nanotherapeutic approaches: Recent advances and challenges.

Integrins are the main cell surface receptors and execute multifaceted functions such as the bidirectional transmission of signals (i.e., inside-out and outside-in) and provide communication between cells and their microenvironments. Integrins are the key regulators of critical biological functions and contribute significantly to the promotion of cancer at almost every stage of disease progression from initial tumor formation to metastasis. Integrin expressions are frequently altered in different cancers, and consequently, several therapeutic strategies targeting integrins have been developed. Furthermore, nanotechnology-based approaches have been devised to overcome the intrinsic limitations of conventional therapies for cancer management, and have been shown to more precise, safer, and highly effective therapeutic tools. Although nanotechnology-based approaches have achieved substantial success for the management of cancer, certain obstacles remain such as inadequate knowledge of nano-bio interactions and the challenges associated with the three stages of clinical trials. This review highlights the different roles of integrins and of integrin-dependent signaling in various cancers and describes the applications of nanotherapeutics targeting integrins. In addition, we discuss RGD-based approaches and challenges posed to cancer management.

Hemostatic, biocompatible, and antibacterial non-animal fungal mushroom-based carboxymethyl chitosan-ZnO nanocomposite for wound-healing applications.

In this study, non-animal mushroom carboxymethyl chitosan (NAM-CMCS) was used as a natural polymer stabilizing agent in the ultrasonic preparation of a ZnO nanocomposite at ambient laboratory temperatures. The formation and morphology of the ZnO nanoparticles were investigated by applying FTIR, XRD, XPS, FE-SEM, and DLS techniques. The FTIR and XPS spectra confirmed the presence of NAM-CMCS functional groups and ZnO in the nanoparticles. The prepared NAM-CMCS-ZnO nanoparticles were shown by FE-SEM to have a spherical shape and an average diameter of 18 ± 3.6 nm. The DLS-determined size distribution showed the NAM-CMCS-ZnO nanoparticle size averaged 21 ± 2.9 nm. Finally, cytocompatibility, hemostasis, and antibacterial performance were assessed in vitro to evaluate the biological performance of NAM-CMCS-ZnO nanoparticles. In vitro Prestoblue® assay and live/dead test results from skin fibroblast and keratinocytes confirmed the developed NAM-CMCS-ZnO nanoparticles were biocompatible over a wide range of concentrations (0-500 µg/well). The NAM-CMCS-ZnO nanoparticles exhibited synergetic antibacterial properties against Gram-positive (Staphylococcus aureus) bacteria. Moreover, the nanoparticles showed hemostatic properties with good hemocompatibility. The overall excellent biological properties of NAM-CMCS-ZnO nanoparticles indicate its suitability for use in wound dressing applications.

Mechanically improved porous hydrogels with polysaccharides via polyelectrolyte complexation for bone tissue engineering.

Bone tissue engineering aims to design mechanically improved macroporous hydrogels with fibrous topologies using polysaccharides that can provide an appropriate microenvironment in bone defects in order to enhance bone regeneration similar to the native bone extracellular matrix. Herein, we developed hydrogels by intercalation of chitosan (CS) and sodium alginate (SA)-based polyelectrolyte complexes (PECs) (in situ formation using glucuronic acid delta-galactone as an acidifying agent (GDL)) within the poly(acrylamide) (PAM)-crosslinked network (PEC-PAM) during free radical polymerization. The structure and interactions of PEC-PAM were confirmed by FTIR and XRD experiments. The PEC greatly influenced the porosity, pore size, and mechanical properties of hydrogels. Importantly, the PEC within the hydrogels possessed a macroporous structure with a ladder-like fibrous topology, which may provide better cell growth and adhesion. Moreover, the hydrogels showed good bio-mineralization capacity in simulated body fluid solutions as confirmed by FTIR, XRD, FE-SEM, and SEM-EDX. The in vitro performance of the PEC-PAM hydrogels was assessed towards human bone osteoblasts cells in terms of cell proliferation, biocompatibility, and cell adhesion. All of the results suggest that PEC-PAM hydrogels have good potential in bone tissue engineering.

Mussel-Inspired Cell/Tissue-Adhesive, Hemostatic Hydrogels for Tissue Engineering Applications.

The combination of multiple physiological (swelling, porosity, mechanical, and biodegradation) and biological (cell/tissue-adhesive, cell proliferation, and hemostatic) properties on a single hydrogel has great potential for skin tissue engineering. Adhesive hydrogels based on polydopamine (PDA) have become the most popular in the biomedical field; however, integrating multiple properties on a single adhesive hydrogel remains a challenge. Here, inspired by the chemistry of mussels, we developed PDA-sodium alginate-polyacrylamide (PDA-SA-PAM)-based hydrogels with multiple physiological and biological properties for skin tissue engineering applications. The hydrogels were prepared by alkali-induced polymerization of DA followed by complexation with SA in PAM networks. The chemical composition of the hydrogels was characterized by X-ray photoelectron spectroscopy. PDA-SA complexed chains were homogeneously dispersed in the PAM network and exhibited good elasticity and excellent mechanical properties, such as a compressive stress of 0.24 MPa at a compression strain of 70% for 0.4PDA-SA-PAM. The adhesive hydrogel also maintained a highly interconnected porous structure (∼94% porosity) along with PDA microfibrils. The hydrogel possesses outstanding swelling and biodegradability properties. Owing to the presence of the PDA-SA complex in the PAM network, the hydrogels show good adhesion to various substrates (plastic, skin, glass, computer screens, and leaves); for example, the adhesive strength of the 0.4PDA-SA-PAM to porcine skin was 24.5 kPa. The adhesive component of the PDA-SA chains in the PAM network significantly improves the cell proliferation, cell attachment, cell spreading, and functional expression of human skin fibroblasts (CCD-986sk) and keratinocytes. Moreover, the PDA chains exhibited good hemostatic properties, resulting in rapid blood coagulation. Considering their excellent cell affinity, and rapid blood coagulation ability, these mussel-inspired hydrogels have substantial potential for skin tissue engineering applications.