State-of-the-art progress on locust bean gum polysaccharide for sustainable food packaging and drug delivery applications: A review with prospectives.

Locust bean gum (LBG), a polysaccharide-based natural polymer, is being widely researched as an appropriate additive for various products, including food, gluten-free formulations, medicines, paper, textiles, oil well drilling, cosmetics, and medical uses. Drug delivery vehicles, packaging, batteries, and catalytic supports are all popular applications for biopolymer-based materials. This review discusses sustainable food packaging and drug delivery applications for LBG. Given the benefits of LBG polysaccharide as a source of dietary fiber, it is also being investigated as a potential treatment for many health disorders, including colorectal cancer, diabetes, and gastrointestinal difficulties. The flexibility of LBG polysaccharide allows it to form hydrogen bonds with water molecules, a crucial characteristic of biomaterials, and the film-forming properties of LBG are critical for food packaging applications. The extraction process of LBG plays an important role in properties such as viscosity and gel-forming properties. Moreover, there are multiple factors such as temperature, pressure, pH, etc. The LBG-based functional composite film is effective in improving the shelf life as well as monitoring the freshness of fruits, meat and other processed food. The LBG-based hydrogel is excellent carrier of drugs and can be used for slow and sustainable release of active components present in drugs. Thus, the primary goal of this review was to conduct a comprehensive evaluation of the literature with a focus on the composition, properties, processing, food packaging, and medicine delivery applications of LBG polysaccharides. Thus, we investigated the chemical composition, extraction, and characteristics of LBG polysaccharides that underlie their applications in the food packaging and medicine delivery fields.

Electron Beam-Supported Fabrication of Biocompatible Silver/iota-Carrageenan for Wound Healing Application.

Silver nanoparticles (AgNPs) are a potent antibacterial agent, especially when used to treat bacteria that are multidrug resistant. However, it is challenging to eliminate the hazardous reducing agents that remain in AgNPs produced by the conventional chemical reduction process. To overcome these challenges, the presented research demonstrates the fabrication of AgNPs using iota-carrageenan (ι-carra) as a carbohydrate polymer using electron beam (EB) irradiation. Well-characterized ι-carra@AgNPs have a face-centered cubic (FCC) structure with spherical morphology and an average size of 26 nm. Herein we explored the approach for fabricating ι-carra@AgNPs that is suitable for scaling up the production of nanoparticles that exhibit excellent water stability. Further, the optimized ι-carra@AgNPs exhibited considerable antibacterial activity of 40% and 30% inhibition when tested with Gram-negative Escherichia coli ATCC 43895 and Gram-positive Staphylococcus aureus (S. aureus) (ATCC 6538), respectively, and low cytotoxicity at 10-50 µg/mL. To establish the potential biomedical application, as proof of the concept, the ι-carra@AgNPs showed significant antibiofilm activity at 20 µg/mL and also showed 95% wound healing abilities at 50 µg/mL compared to the nontreated control groups. Electron beam assisted ι-carra@AgNPs showed significant beneficial effects against specific bacterial strains and may provide a guide for the development of new antibacterial materials for wound dressing for large-scale production for biomedical applications.

Surface adsorption and corrosion resistance performance of modified chitosan: Gravimetric, electrochemical, and computational studies.

Two novel chitosan derivatives (water soluble and acid soluble) modified with thiocarbohydrazide were produced by a quick and easy technique using formaldehyde as links. The novel compounds were synthesized and then characterized by thermogravimetric analysis, elemental analysis, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and differential scanning calorimetry. Their surface morphologies were examined using scanning electron microscopy. These chitosan derivatives could produce pH-dependent gels. The behavior of mild steel in 5 % acetic acid, including both inhibitors at various concentrations, was investigated using gravimetric and electrochemical experiments. According to the early findings, both compounds (TCFACN and TCFWCN) functioned as mixed-type metal corrosion inhibitors. Both inhibitors showed their best corrosion inhibition efficiency at 80 mg L-1. TCFACN and TCFWCN, showed approximately 92 % and 94 % corrosion inhibition, respectively, at an optimal concentration of 80 mg L-1, according to electrochemical analysis. In the corrosion test, the water contact angle of the polished MS sample at 87.90 °C was reduced to 51 °C. The water contact angles for MS inhibited by TCFACN and TCFWCN in the same electrolyte were greater, measuring 78.10 °C and 93.10 °C, respectively. The theoretical results also support the experimental findings.

Engineering a self-healing grafted chitosan-sodium alginate based hydrogel with potential keratinocyte cell migration property and inhibitory effect against fluconazole resistance Candida albicans biofilm.

Biofilms developed by microorganisms cause an extremely severe clinical problem that leads to drug failure. Bioactive polymeric hydrogels display potential for controlling the formation of microorganism-based biofilms, but their rapid biodegradability in these biofilm sites is still a major challenge. To overcome this, chitosan (CS), a natural functional biomaterial, has been used because of its effective penetrability in the cell wall of microorganisms; however, its fast biodegradability has restricted its further use. Hence, in this study, to improve the stability of CS and increase its penetration retention inside a biofilm, grafted CS was prepared and then crosslinked with sodium alginate (SA) to synthesize CS-poly(MA-co-AA)SA hydrogel via a free radical grafting method, therefore enhancing its antibiofilm efficiency against biofilms. The prepared hydrogel demonstrated excellent effectiveness against (≥90 % inhibition) biofilms of Candida albicans. Additionally, in vitro and in vivo safety assays established that the prepared hydrogel can be used in a biofilm microenvironment and might reduce drug resistance burden owing to its long-term antibiofilm effect and improved CS stability at the biofilm site. Furthermore, in vitro wound healing outcomes of hydrogel indicated its potential application for chronic wound treatment. This research opens a new advanced strategy for biofilm-associated infection treatment, including wound treatment.

Salbutamol ameliorates skeletal muscle wasting and inflammatory markers in streptozotocin (STZ)-induced diabetic rats.

Diabetes accelerates muscle atrophy, leading to the deterioration of skeletal muscles. This study aimed to assess the potential of the ß2-adrenoceptor agonist, salbutamol (SLB), to alleviate muscle atrophy in streptozotocin (STZ)-induced diabetic rats. Male Sprague Dawley rats were randomized into four groups (n=6): control, SLB, STZ (55 mg/kg, single i.p.), and STZ + SLB (6 mg/kg, orally for 4 weeks). After the final SLB dose, animals underwent tests to evaluate muscle strength and coordination, including forelimb grip strength, wire-hanging, actophotometer, rotarod, and footprint assessments. Rats were then sacrificed, and serum and gastrocnemius (GN) muscles were collected for further analysis. Serum evaluations included proinflammatory markers (tumor necrosis factor α, interleukin-1ß, interleukin-6), muscle markers (creatine kinase, myostatin), testosterone, and lipidemic markers. Muscle oxidative stress (malonaldehyde, protein carbonyl), antioxidants (glutathione, catalase, superoxide dismutase), and histology were also performed. Additionally, 1H nuclear magnetic resonance serum profiling was conducted. SLB notably enhanced muscle grip strength, coordination, and antioxidant levels, while reduced proinflammatory markers and oxidative stress in STZ-induced diabetic rats. Reduced serum muscle biomarkers, increased testosterone, restored lipidemic levels, and improved muscle cellular architecture indicated SLB's positive effect on muscle condition in diabetic rats. Metabolomics profiling revealed that the STZ group significantly increased the phenylalanine-to-tyrosine ratio (PTR), lactate-to-pyruvate ratio (LPR), acetate, succinate, isobutyrate, and histidine. SLB administration restored these perturbed serum metabolites in the STZ-induced diabetic group. In conclusion, salbutamol significantly protected against skeletal muscle wasting in STZ-induced diabetic rats.

Salbutamol Attenuates Diabetic Skeletal Muscle Atrophy by Reducing Oxidative Stress, Myostatin/GDF-8, and Pro-Inflammatory Cytokines in Rats.

Type 2 diabetes is a metabolic disorder that leads to accelerated skeletal muscle atrophy. In this study, we aimed to evaluate the effect of salbutamol (SLB) on skeletal muscle atrophy in high-fat diet (HFD)/streptozotocin (STZ)-induced diabetic rats. Male Sprague Dawley rats were divided into four groups (n = 6): control, SLB, HFD/STZ, and HFD/STZ + SLB (6 mg/kg orally for four weeks). After the last dose of SLB, rats were assessed for muscle grip strength and muscle coordination (wire-hanging, rotarod, footprint, and actophotometer tests). Body composition was analyzed in live rats. After that, animals were sacrificed, and serum and gastrocnemius (GN) muscles were collected. Endpoints include myofibrillar protein content, muscle oxidative stress and antioxidants, serum pro-inflammatory cytokines (interleukin-1ß, interleukin-2, and interleukin-6), serum muscle markers (myostatin, creatine kinase, and testosterone), histopathology, and muscle 1H NMR metabolomics. Findings showed that SLB treatment significantly improved muscle strength and muscle coordination, as well as increased lean muscle mass in diabetic rats. Increased pro-inflammatory cytokines and muscle markers (myostatin, creatine kinase) indicate muscle deterioration in diabetic rats, while SLB intervention restored the same. Also, Feret's diameter and cross-sectional area of GN muscle were increased by SLB treatment, indicating the amelioration in diabetic rat muscle. Results of muscle metabolomics exhibit that SLB treatment resulted in the restoration of perturbed metabolites, including histidine-to-tyrosine, phenylalanine-to-tyrosine, and glutamate-to-glutamine ratios and succinate, sarcosine, and 3-hydroxybutyrate (3HB) in diabetic rats. These metabolites showed a pertinent role in muscle inflammation and oxidative stress in diabetic rats. In conclusion, findings showed that salbutamol could be explored as an intervention in diabetic-associated skeletal muscle atrophy.

Gum Arabic polysaccharide embedded L-cysteine capped copper oxide nanocarriers selectively inhibit fluconazole-resistant C. albicans biofilm and remove the toxic dye from wastewater.

Copper oxide nanocarriers have attracted increasing interest in the scientific community, including antimicrobial applications. Candida biofilm developed causes serious clinical problems, leading to drug failure caused by its inherent drug tolerance. Nanocarriers are a good alternative approach to solving this challenge because of their excellent penetration power inside biofilms. Hence, main objectives of this research were to prepare gum arabic-embedded L-cysteine-capped copper oxide nanocarriers (GCCuO NCs) and tested against C. albicans and explore another application. To achieve the main research objectives, GCCuO NCs were synthesized and investigated for antibiofilm potency against C. albicans. Various methods were employed to measure antibiofilm potency such as biofilm assay etc., of NCs. The nano size of GCCuO NCs is advantageous for augmenting penetration power and retention into biofilms. GCCuO NCs at 100 µg/mL exhibited significant antibiofilm activity against the C. albicans DAY185 by switching of yeast-to-hyphae and gene perturbation. The level of CR dye adsorption was 58.96 % using 30 µg/mL of NCs. Based on effective C. albicans biofilm inhibition and CR dye adsorption capacity of NCs, it can be suggested that present research work opens an innovative path to treat biofilm-associated fungal infections, and these NCs can be used for environmental remedies.

Atenolol Ameliorates Skeletal Muscle Atrophy and Oxidative Stress Induced by Cast Immobilization in Rats.

(1) Background: Skeletal muscle atrophy is a common and debilitating condition associated with disease, bed rest, and inactivity. We aimed to investigate the effect of atenolol (ATN) on cast immobilization (IM)-induced skeletal muscle loss. (2) Methods: Eighteen male albino Wistar rats were divided into three groups: a control group, an IM group (14 days), and an IM+ATN group (10 mg/kg, orally for 14 days). After the last dose of atenolol, forced swimming test, rotarod test, and footprint analysis were performed, and skeletal muscle loss was determined. Animals were then sacrificed. Serum and gastrocnemius (GN) muscles were then collected, serum creatinine, GN muscle antioxidant, and oxidative stress levels were determined, and histopathology and 1H NMR profiling of serum metabolites were performed. (3) Results: Atenolol significantly prevented immobilization-induced changes in creatinine, antioxidant, and oxidative stress levels. Furthermore, GN muscle histology results showed that atenolol significantly increased cross-sectional muscle area and Feret's diameter. Metabolomics profiling showed that glutamine-to-glucose ratio and pyruvate, succinate, valine, citrate, leucine, isoleucine, phenylalanine, acetone, serine, and 3-hydroxybutyrate levels were significantly higher, that alanine and proline levels were significantly lower in the IM group than in the control group, and that atenolol administration suppressed these metabolite changes. (4) Conclusions: Atenolol reduced immobilization-induced skeletal muscle wasting and might protect against the deleterious effects of prolonged bed rest.

Supramolecular ß-Cyclodextrin-Quercetin Based Metal-Organic Frameworks as an Efficient Antibiofilm and Antifungal Agent.

The loading of drugs or medicinally active compounds has recently been performed using metal-organic frameworks (MOFs), which are thought to be a new type of porous material in which organic ligands and metal ions can self-assemble to form a network structure. The quercetin (QRC) loading and biofilm application on a cyclodextrin-based metal-organic framework via a solvent diffusion approach is successfully accomplished in the current study. The antibacterial plant flavonoid QRC is loaded onto ß-CD-K MOFs to create the composite containing inclusion complexes (ICs) and denoted as QRC:ß-CD-K MOFs. The shifting in the chemical shift values of QRC in the MOFs may be the reason for the interaction of QRC with the ß-CD-K MOFs. The binding energies and relative contents of MOFs are considerably changed after the formation of QRC:ß-CD-K MOFs, suggesting that the interactions took place during the loading of QRC. Confocal laser scanning microscopy (CLSM) showed a reduction in the formation of biofilm. The results of the cell aggregation and hyphal growth are consistent with the antibiofilm activity that is found in the treatment group. Therefore, QRC:ß-CD-K MOFs had no effect on the growth of planktonic cells while inhibiting the development of hyphae and biofilm in C. albicans DAY185. This study creates new opportunities for supramolecular ß-CD-based MOF development for use in biological research and pharmaceutical production.

Encapsulation of tannic acid in polyvinylidene fluoride mediated electrospun nanofibers and its antibiofilm and antibacterial activities.

In the past 15 years or more, interest in polymer-mediated nanofibers (NFs), a significant class of nanomaterials, has grown. Although fibers with a diameter of less than 1 mm are frequently commonly referred to as NFs, and are typically defined as having a diameter of less than several hundreds of nanometers. Due to the increased antibiotic resistance of many diseases nowadays, NFs with antibacterial activity are quite important. A flexible technique for creating NFs with the desired characteristics is called electrospinning. This research article describes how to make electrospun NFs of tannic acid (TA) with polyvinylidene fluoride (PVDF) as the template. As a result, the absorbance of the obtained NFs has been raised without forming any additional peaks in the spectral ranges. The obtained NF has a gradual increase in intensity, and the FT-IR data show that the TA is present in the NFs. FE-SEM images show that the NFs are discovered to be completely bead-free. Since TA reduced the viscosity of the spinning solution while marginally increasing solution conductivity, PVDF NFs have a greater average fiber diameter (AFD) than NFs of TA with PVDF, which is likely a result of the TA solutions in it. The findings showed that TA greatly decreased S. aureus and E. coli's ability to attach. The acquired NFs created in this work may have significant potential for reducing the pathogenicity of S. aureus and E. coli as well as their ability to build biofilms.

Synthesis of Bio-Based Polybenzoxazine and Its Antibiofilm and Anticorrosive Activities.

Candida albicans are highly widespread pathogenic fungi in humans. Moreover, its developed biofilm causes serious clinical problems, leading to drug failure caused by its inherent drug tolerance. Hence, the inhibition of biofilm formation and virulence characteristics provide other means of addressing infections. Polymer composites (PCs) derived from natural products have attracted increasing interest in the scientific community, including antimicrobial applications. PCs are a good alternative approach to solving this challenge because of their excellent penetration power inside biofilms. The main objectives of this study were to synthesize a novel curcumin-based polybenzoxazine polymer composite (poly(Cu-A) PC) using Mannich condensation reaction and evaluate their potency as an antibiofilm and anticorrosive candidate against C. albicans. In addition, their anticorrosive efficacy was also explored. PC exhibited significant antibiofilm efficacy versus C. albicans DAY185 by the morphologic changing of yeast to hyphae, and>90% anticorrosive efficacy was observed at a higher dose of PC. These prepared PC were safe in vivo against Caenorhabditis elegans and Raphanus raphanistrum. The study shows that a polybenzoxazine polymer composite has the potential for controlling biofilm-associated fungal infections and virulence by C. albicans, and opens a new avenue for designing PCs as antifungal, anticorrosive agents for biofilm-associated fungal infections and industrial remediation.

Novel Microwave Synthesis of Copper Oxide Nanoparticles and Appraisal of the Antibacterial Application.

The exceptional characteristics of bio-synthesized copper oxide nanoparticles (CuO NPs), including high surface-to-volume ratio and high-profit strength, are of tremendous interest. CuO NPs have cytotoxic, catalytic, antibacterial, and antioxidant properties. Fruit peel extract has been recommended as a valuable alternative method due to the advantages of economic prospects, environment-friendliness, improved biocompatibility, and high biological activities, such as antioxidant and antimicrobial activities, as many physical and chemical methods have been applied to synthesize metal oxide NPs. In the presence of apple peel extract and microwave (MW) irradiation, CuO NPs are produced from the precursor CuCl2. 2H2O. With the help of TEM analysis, and BET surface area, the average sizes of the obtained NPs are found to be 25-40 nm. For use in antimicrobial applications, CuO NPs are appropriate. Disk diffusion tests were used to study the bactericidal impact in relation to the diameter of the inhibition zone, and an intriguing antibacterial activity was confirmed on both the Gram-positive bacterial pathogen Staphylococcus aureus and Gram-negative bacterial pathogen Escherichia coli. Moreover, CuO NPs did not have any toxic effect on seed germination. Thus, this study provides an environmentally friendly material and provides a variety of advantages for biomedical applications and environmental applications.

Sustainable Chitosan/Polybenzoxazine Films: Synergistically Improved Thermal, Mechanical, and Antimicrobial Properties.

Polybenzoxazines (Pbzs) are considered as an advanced class of thermosetting phenolic resins as they overcome the shortcomings associated with novolac and resole type phenolic resins. Several advantages of these materials include curing without the use of catalysts, release of non-toxic by-products during curing, molecular design flexibility, near-zero shrinkage of the cured materials, low water absorption and so on. In spite of all these advantages, the brittleness of Pbz is a knotty problem that could be solved by blending with other polymers. Chitosan (Ch), has been extensively investigated in this context, but its thermal and mechanical properties rule out its practical applications. The purpose of this work is to fabricate an entirely bio-based Pbz films by blending chitosan with benzoxazine (Bzo), which is synthesized from curcumin and furfuryl amine (curcumin-furfurylamine-based Bzo, C-fu), by making use of a benign Schiff base chemistry. FT-IR and 1H-NMR spectroscopy were used to confirm the structure of C-fu. The impact of chitosan on benzoxazine polymerization was examined using FT-IR and DSC analyses. Further evidence for synergistic interactions was provided by DSC, SEM, TGA, and tensile testing. By incorporating C-fu into Ch, Ch-grafted-poly(C-fu) films were obtained with enhanced chemical resistance and tensile strength. The bio-based polymer films produced inhibited the growth of Staphylococcus aureus and Escherichia coli, by reversible labile linkages, expanding Ch galleries, and releasing phenolic species, which was 125 times stronger than bare Ch. In addition, synthesized polybenzoxazine films [Ch/Poly(C-fu)] showed significant dose-dependent antibiofilm activity against S. aureus and E. coli as determined by confirmed by confocal laser scanning microscopy (CLSM). This study suggests that bio-based Ch-graft-polymer material provide improved anti-bacterial property and characteristics that may be considered as a possibility in the near future for wound healing and implant applications.

Synthesis of TiO2, TiO2/PAni, TiO2/PAni/GO nanocomposites and photodegradation of anionic dyes Rose Bengal and thymol blue in visible light.

Nowadays, fast-growing industrialization has resulted in the release of enormous amounts of contaminants such as toxic dyes into water bodies and leading to cause health and environmental risks. In this regard, we prepared inorganic nanocomposites for the treatment of toxic dyes. Hence, we synthesized TiO2/PAni/GO nanocomposites and examined them by using XRD, SEM, TEM, UV-Vis spectroscopy, BET analysis, and a photoluminescence investigation. In addition, band gap energies of the nanocomposites were determined, and Total Organic Carbon (TOC) testing was used to determine dye degradation levels. The photocatalytic degradations of Thymol Blue and Rose Bengal dyes were investigated at different dye concentrations, illumination periods, solution pH values, and photocatalyst dosages. By using TiO2/PAni/GO, TiO2/PAni, and TiO2 at neutral pH, a photocatalyst dose of 1600 mg/L, and exposure to visible light, Thymol Blue and Rose Bengal were photodegraded 85-99%, 60-97%, and 10-20%, respectively, at a concentration of 25 ppm (180 min). Reductions in the TOCs confirmed their photodegradation, and a kinetic study revealed photodegradation followed first-order kinetics. This study shows the coating of polyaniline (PAni) and graphene oxide (GO) on TiO2 improved its ability to photodegrade Thymol Blue and Rose Bengal dye.

Magnetic Application of Gadolinium Orthoferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion Method.

In this manuscript, we present the synthesis of gadolinium orthoferrite nanoparticles using the sol-gel auto-combustion technique. The obtained gadolinium orthoferrite nanoparticles were annealed at various temperatures, such as 800 °C, 900 °C, 1000 °C, and 1100 °C. The synthesized materials were analyzed by various instrumental characterizations. The vibrational characteristics of the synthesized samples were verified by FTIR. The surface morphology of the gadolinium orthoferrite nanoparticles was analyzed by FE-SEM and HR-TEM, revealing their spherical structural morphology and uniform particle structure. The presence of the elemental features was analyzed in the gadolinium orthoferrite nanoparticles by EDAX. The surface analysis of the core ranges of the XPS-recorded spectra were obtained for the elemental states of the Gd, Fe, and O factors in the samples, and it additionally characterized the different levels of oxidative states by fitting the levels of the high-resolution parameters of Gd 4d, Fe 2p, and O 1s. The magnetic properties of the samples were investigated by VSM. The measurement of the magnetic parameters revealed that gadolinium orthoferrite nanoparticles exhibit a ferromagnetic nature.

Hydrophilic Composites of Chitosan with Almond Gum: Characterization and Mechanical, and Antimicrobial Activity for Compostable Food Packaging.

To enhance the characteristics of the biocomposite film, solution cast was used to incorporate almond gum at different concentrations (10.0, 30.0, and 50.0%). The functional groups and morphology were determined using FTIR and SEM. The thermal property of chitosan and its composites materials were determined via TGA. In this study, the incorporation of almond gum into the chitosan matrix resulted in good mechanical strength, film thickness, and low barrier and solubility characteristics. Water vapor transmission rate (WVTR) and oxygen transmission rate (OTR) of the composites films was also investigated. The WVTR and OTR values for the chitosan/almond gum (CSA) composite film values are 11.6 ± 1.62 (g/m2/day) and 32.9 ± 1.95(cc/m2/24 h),respectively. The obtained composites show significantly improved antimicrobial activity against Gram-negative (E. coli) and Gram-positive (S. aureus) food-borne pathogenic bacteria. The results suggest that the CSA composites may serve as a promising candidate for antimicrobial food packaging materials. After an observation of the test results, it is inferred that the CSA composites bear good mechanical and antimicrobial activity and also show enhanced morphological characteristics.

Thermo-Sensitive Poly (N-isopropylacrylamide-co-polyacrylamide) Hydrogel for pH-Responsive Therapeutic Delivery.

Stimuli-response polymeric nanoparticles have emerged as a carrier system for various types of therapeutic delivery. In this study, we prepared a dual pH- and thermo-sensitive copolymer hydrogel (HG) system (PNIPAm-co-PAAm HG), using N-isopropyl acrylamide (NIPAm) and acrylamide (AAm) as comonomers. The synthesized PNIPAm-co-PAAm HG was characterized using various instrumental characterizations. Moreover, the PNIPAm-co-PAAm HG's thermoresponsive phase transition behavior was investigated, and the results showed that the prepared HG responds to temperature changes. In vitro drug loading and release behavior of PNIPAm-co-PAAm HG was investigated using Curcumin (Cur) as the model cargo under different pH and temperature conditions. The PNIPAm-co-PAAm HG showed pH and temperature-responsive drug release behavior and demonstrated about 65% Cur loading efficiency. A nearly complete release of the loaded Cur occurred from the PNIPAm-co-PAAm HG over 4 h at pH 5.5 and 40 °C. The cytotoxicity study was performed on a liver cancer cell line (HepG2 cells), which revealed that the prepared PNIPAm-co-PAAm HG showed good biocompatibility, suggesting that it could be applied as a drug delivery carrier. Moreover, the in vitro cytocompatibility test (MTT assay) results revealed that the PNIPAm-co-PAAm HG is biocompatible. Therefore, the PNIPAm-co-PAAm HG has the potential to be useful in the delivery of drugs in solid tumor-targeted therapy.

Novel Approach in Biodegradation of Synthetic Thermoplastic Polymers: An Overview.

Biodegradation is necessary for water-soluble or water-immiscible polymers because they eventually enter streams which can neither be recycled nor incinerated. It is important to consider the microbial degradation of natural and synthetic polymers in order to understand what is necessary for biodegradation and the mechanisms involved. Low/high-density polyethylene is a vital cause of environmental pollution. It occurs by choking the sewer line through mishandling, thus posing an everlasting ecological threat. Environmental pollution due to the unscrupulous consumption of synthetic polymers derived from petroleum has an adverse impact on the environment since the majority of plastics do not degrade, and the further incineration of synthetic plastics generates CO2 and dioxin. This requires understanding the interactions between materials and microorganisms and the biochemical changes involved. Widespread studies on the biodegradation of plastics have been carried out in order to overcome the environmental problems associated with synthetic plastic waste. Awareness of the waste problem and its impact on the environment has awakened new interest in the area of degradable polymers through microbes viz., bacteria, fungi, and actinomycetes. The microbial degradation of plastics is caused by certain enzymatic activities that lead to a chain cleavage of polymers into oligomers and monomers. This review focuses on the biodegradation rate of plastics by fungal and bacterial communities and the mode of action of biodegradation.

Thermoplastic Starch Composites Reinforced with Functionalized POSS: Fabrication, Characterization, and Evolution of Mechanical, Thermal and Biological Activities.

Rapid advancements in materials that offer the appropriate mechanical strength, barrier, and antimicrobial activity for food packaging are still confronted with significant challenges. In this study, a modest, environmentally friendly method was used to synthesize functionalized octakis(3-chloropropyl)octasilsesquioxane [fn-POSS] nanofiller. Composite films compared to the neat thermoplastic starch (TS) film, show improved thermal and mechanical properties. Tensile strength results improved from 7.8 MPa to 28.1 MPa (TS + 5.0 wt.% fn-POSS) with fn-POSS loading (neat TS). The barrier characteristics of TS/fn-POSS composites were increased by fn-POSS by offering penetrant molecules with a twisting pathway. Also, the rates of O2 and H2O transmission were decreased by 50.0 cc/m2/day and 48.1 g/m2/day in TS/fn-POSS composites. Based on an examination of its antimicrobial activity, the fn-POSS blended TS (TSP-5.0) film exhibits a favorable zone of inhibition against the bacterial pathogenic Staphylococcus aureus and Escherichia coli. The TS/fn-POSS (TSP-5.0) film lost 78.4% of its weight after 28 days in natural soil. New plastic materials used for packaging, especially food packaging, are typically not biodegradable, so the TS composite with 5.0 wt.% fn-POSS is therefore of definite interest. The incorporation of fn-POSS with TS composites can improve their characteristics, boost the use of nanoparticles in food packaging, and promote studies on biodegradable composites.

Recent Progress on Modified Gum Katira Polysaccharides and Their Various Potential Applications.

Gum katira polysaccharide is biocompatible and non-toxic, and has antioxidant, anti-microbial, and immunomodulatory properties. It is a natural polysaccharide and exudate derived from the stem bark of Cochlospermum reliogosum Linn. Additionally, it has many traditional medicinal uses as a sedative and for the treatment of jaundice, gonorrhea, syphilis, and stomach ailments. This article provides an overview of gum katira, including its extraction, separation, purification, and physiochemical properties and details of its characterization and pharmacognostic features. This paper takes an in-depth look at the synthetic methods used to modify gum katira, such as carboxymethylation and grafting triggered by free radicals. Furthermore, this review provides an overview of its industrial and phytopharmacological applications for drug delivery and heavy metal and dye removal, its biological activities, its use in food, and the potential use of gum katira derivatives and their industrial applications. We believe researchers will find this paper useful for developing techniques to modify gum katira polysaccharides to meet future demands.