RESUMO
The simultaneous limitation of productivity by two or more nutrients, commonly referred to as nutrient co-limitation, affects microbial communities throughout the marine environment and is of profound importance because of its impacts on various biogeochemical cycles. Multiple types of co-limitation have been described, enabling distinctions based on the hypothesized mechanisms of co-limitation at a biochemical level. These definitions usually pertain to individuals and do not explicitly, or even implicitly, consider complex ecological dynamics found within a microbial community. However, limiting and co-limiting nutrients can be produced in situ by a subset of microbial community members, suggesting that interactions within communities can underpin co-limitation. To address this, we propose a new category of nutrient co-limitation, community interaction co-limitation (CIC). During CIC, one part of the community is limited by one nutrient, which results in the insufficient production or transformation of a biologically produced nutrient that is required by another part of the community, often primary producers. Using cobalamin (vitamin B12) and nitrogen fixation as our models, we outline three different ways CIC can arise based on current literature and discuss CIC's role in biogeochemical cycles. Accounting for the inherent and complex roles microbial community interactions play in generating this type of co-limitation requires an expanded toolset - beyond the traditional approaches used to identify and study other types of co-limitation. We propose incorporating processes and theories well-known in microbial ecology and evolution to provide meaningful insight into the controls of community-based feedback loops and mechanisms that give rise to CIC in the environment. Finally, we highlight the data gaps that limit our understanding of CIC mechanisms and suggest methods to overcome these and further identify causes and consequences of CIC. By providing this framework for understanding and identifying CIC, we enable systematic examination of the impacts this co-limitation can have on current and future marine biogeochemical processes.
RESUMO
Nutrient limitation of oceanic primary production exerts a fundamental control on marine food webs and the flux of carbon into the deep ocean. The extensive boundaries of the oligotrophic sub-tropical gyres collectively define the most extreme transition in ocean productivity, but little is known about nutrient limitation in these zones. Here we present the results of full-factorial nutrient amendment experiments conducted at the eastern boundary of the South Atlantic gyre. We find extensive regions in which the addition of nitrogen or iron individually resulted in no significant phytoplankton growth over 48 hours. However, the addition of both nitrogen and iron increased concentrations of chlorophyll a by up to approximately 40-fold, led to diatom proliferation, and reduced community diversity. Once nitrogen-iron co-limitation had been alleviated, the addition of cobalt or cobalt-containing vitamin B12 could further enhance chlorophyll a yields by up to threefold. Our results suggest that nitrogen-iron co-limitation is pervasive in the ocean, with other micronutrients also approaching co-deficiency. Such multi-nutrient limitations potentially increase phytoplankton community diversity.
Assuntos
Ferro/metabolismo , Nitrogênio/metabolismo , Fitoplâncton/metabolismo , Água do Mar/química , Oceano Atlântico , Biodiversidade , Clorofila/metabolismo , Clorofila A , Cobalto/metabolismo , Cobalto/farmacologia , Diatomáceas/efeitos dos fármacos , Diatomáceas/crescimento & desenvolvimento , Diatomáceas/metabolismo , Cadeia Alimentar , Ferro/farmacologia , Nitrogênio/farmacologia , Fitoplâncton/efeitos dos fármacos , Fitoplâncton/crescimento & desenvolvimento , Água do Mar/análise , Vitamina B 12/metabolismo , Vitamina B 12/farmacologiaRESUMO
A rapid, automated, high-throughput analytical method capable of simultaneous analysis of multiple elements at trace and ultratrace levels is required to investigate the biogeochemical cycle of trace metals in the ocean. Here we present an analytical approach which uses a commercially available automated preconcentration device (SeaFAST) with accurate volume loading and in-line pH buffering of the sample prior to loading onto a chelating resin (WAKO) and subsequent simultaneous analysis of iron (Fe), zinc (Zn), copper (Cu), nickel (Ni), cadmium (Cd), lead (Pb), cobalt (Co) and manganese (Mn) by high-resolution inductively-coupled plasma mass spectrometry (HR-ICP-MS). Quantification of sample concentration was undertaken using isotope dilution for Fe, Zn, Cu, Ni, Cd and Pb, and standard addition for Co and Mn. The chelating resin is shown to have a high affinity for all analyzed elements, with recoveries between 83 and 100% for all elements, except Mn (60%) and Ni (48%), and showed higher recoveries for Ni, Cd, Pb, Co and Mn in direct comparison to an alternative resin (NOBIAS Chelate-PA1). The reduced recoveries for Ni and Mn using the WAKO resin did not affect the quantification accuracy. A relatively constant retention efficiency on the resin over a broad pH range (pH 5-8) was observed for the trace metals, except for Mn. Mn quantification using standard addition required accurate sample pH adjustment with optimal recoveries at pH 7.5 ± 0.3. UV digestion was necessary to increase recovery of Co and Cu in seawater by 15.6% and 11.4%, respectively, and achieved full break-down of spiked Co-containing vitamin B12 complexes. Low blank levels and detection limits could be achieved (e.g., 0.029 nmol L-1 for Fe and 0.028 nmol L-1 for Zn) with the use of high purity reagents. Precision and accuracy were assessed using SAFe S, D1, and D2 reference seawaters, and results were in good agreement with available consensus values. The presented method is ideal for high throughput simultaneous analysis of trace elements in coastal and oceanic seawaters. We present a successful application of the analytical method to samples collected in June 2014 in the Northeast Atlantic Ocean.
RESUMO
Hydrogen peroxide (H2O2) is present ubiquitously in marine surface waters where it is a reactive intermediate in the cycling of many trace elements. Photochemical processes are considered the dominant natural H2O2 source, yet cannot explain nanomolar H2O2 concentrations below the photic zone. Here, we determined the concentration of H2O2 in full depth profiles across three ocean basins (Mediterranean Sea, South Atlantic and South Pacific Oceans). To determine the accuracy of H2O2 measurements in the deep ocean we also re-assessed the contribution of interfering species to 'apparent H2O2', as analysed by the luminol based chemiluminescence technique. Within the vicinity of coastal oxygen minimum zones, accurate measurement of H2O2 was not possible due to interference from Fe(II). Offshore, in deep (>1000 m) waters H2O2 concentrations ranged from 0.25 ± 0.27 nM (Mediterranean, Balearics-Algeria) to 2.9 ± 2.2 nM (Mediterranean, Corsica-France). Our results indicate that a dark, pelagic H2O2 production mechanism must occur throughout the deep ocean. A bacterial source of H2O2 is the most likely origin and we show that this source is likely sufficient to account for all of the observed H2O2 in the deep ocean.
RESUMO
This study investigated the effect of intracellular microscale mass transfer on microbial carbon isotope fractionation of tetrachloroethene (PCE) and trichloroethene (TCE). Significantly stronger isotope fractionation was observed for crude extracts vs intact cells of Sulfurospirillum multivorans, Geobacter lovleyi, Desulfuromonas michiganensis, Desulfitobacterium hafniense strain PCE-S, and Dehalobacter restrictus. Furthermore, carbon stable isotope fractionation was stronger for microorganisms with a Gram-positive cell envelope compared to those with a Gram-negative cell envelope. Significant differences were observed between model organisms in cellular sorption capacity for PCE (S. multivorans-K(d-PCE) = 0.42-0.51 L g(-1); D. hafniense-K(d-PCE) = 0.13 L g(-1)), as well as in envelope hydrophobicity (S. multivorans 33.0° to 72.2°; D. hafniense 59.1° to 60.8°) when previously cultivated with fumarate or PCE as electron acceptor, but not for TCE. Cell envelope properties and the tetrachloroethene reductive dehalogenase (PceA-RDase) localization did not result in significant effects on observed isotope fractionation of TCE. For PCE, however, systematic masking of isotope effects as a result of microscale mass transfer limitation at microbial membranes was observed, with carbon isotope enrichment factors of -2.2, -1.5 to -1.6, and -1.0 (CI95% < ± 0.2) for no membrane, hydrophilic outer membrane, and outer + cytoplasmic membrane, respectively. Conclusively, rate-limiting mass transfer barriers were (a) the outer membrane or cell wall and (b) the cytoplasmic membrane in case of a cytoplasmic location of the RDase enzyme. Overall, our results indicate that masking of isotope fractionation is determined by (1) hydrophobicity of the degraded compound, (2) properties of the cell envelope, and (3) the localization of the reacting enzyme.
Assuntos
Bactérias/metabolismo , Etilenos/química , Hidrocarbonetos Clorados/química , Isótopos de Carbono/química , Extratos Celulares , Fracionamento Químico , Desulfitobacterium/metabolismo , Epsilonproteobacteria/metabolismo , Etilenos/metabolismo , Geobacter/metabolismo , Halogenação , Hidrocarbonetos Clorados/metabolismo , Interações Hidrofóbicas e Hidrofílicas , Oxirredutases/metabolismo , Tetracloroetileno/química , Tetracloroetileno/metabolismo , Tricloroetileno/química , Tricloroetileno/metabolismoRESUMO
Atrazine, propazine, and terbuthylazine are chlorotriazine herbicides that have been frequently used in agriculture and thus are potential drinking water contaminants. Hydroxyl radicals produced by advanced oxidation processes can degrade these persistent compounds. These herbicides are also very reactive with sulfate radicals (2.2-3.5 × 10(9) M(-1) s(-1)). However, the dealkylated products of chlorotriazine pesticides are less reactive toward sulfate radicals (e.g., desethyl-desisopropyl-atrazine (DEDIA; 1.5 × 10(8) M(-1) s(-1))). The high reactivity of the herbicides is largely due to the ethyl or isopropyl group. For example, desisopropyl-atrazine (DIA) reacts quickly (k = 2 × 10(9) M(-1) s(-1)), whereas desethyl-atrazine (DEA) reacts more slowly (k = 9.6 × 10(8) M(-1) s(-1)). The tert-butyl group does not have a strong effect on reaction rate, as shown by the similar second order reaction rates between desethyl-terbuthylazine (DET; k = 3.6 × 10(8) M(-1) s(-1)) and DEDIA. Sulfate radicals degrade a significant proportion of atrazine (63%) via dealkylation, in which deethylation significantly dominates over deisopropylation (10:1). Sulfate and hydroxyl radicals react at an equally fast rate with atrazine (k (hydroxyl radical + atrazine) = 3 × 10(9) M(-1) s(-1)). However, sulfate and hydroxyl radicals differ considerably in their reaction rates with humic acids (k (sulfate radical + humic acids) = 6.8 × 10(3) L mgC(-1) s(-1) (mgC = mg carbon); k (hydroxyl radical + humic acids) = 1.4 × 10(4) L mgC(-1) s(-1)). Thus, in the presence of humic acids, atrazine is degraded more efficiently by sulfate radicals than by hydroxyl radicals.