Automation of film densitometry for application in personal monitoring.

In this research work, a semi-automatic densitometry system has been developed for large-scale monitoring services by use of film badge dosemeters. The system consists of a charge-coupled device (CCD)-based scanner that can scan optical densities (ODs) up to 4.2, a computer vision algorithm to improve the quality of digitised films and an analyser program to calculate the necessary information, e.g. the mean OD of region of interest and radiation doses. For calibration of the system, two reference films were used. The Microtek scanner International Color Consortium (ICC) profiler is applied for determining the colour attributes of the scanner accurately and a reference of the density step tablet, Bundesanstalt für Materialforschung und-prüfung (BAM) is used for calibrating the automatic conversion of gray-level values to OD values in the range of 0.2-4.0 OD. The system contributes to achieve more objectives and reliable results. So by applying this system, we can digitise a set of 20 films at once and calculate their relative doses less than about 4 min, and meanwhile it causes to avoid disadvantages of manual process and to enhance the accuracy of dosimetry.

Occupational dose assessment and National Dose Registry System in Iran.

This report presents status of external and internal dose assessment of workers and introducing the structure of National Dose Registry System of Iran (NDRSI). As well as types of individual dosemeters in use, techniques for internal dose assessment are presented. Results obtained from the International Atomic Energy Agency intercomparison programme on measurement of personal dose equivalent H(p) (10) and consistency of the measured doses with the delivered doses are shown. Also, implementation of dosimetry standards, establishment of quality management system, authorisation and approval procedure of dosimetry service providers are discussed.

Analysing an accident related to orphan sources including dose assessment.

This paper discusses an accident, which occurred in one of the radiation application centres in Iran, follow-up investigations as well as lessons learnt. In January 2004 the Regulatory Authority was informed through a university radiation protection officer of an accident regarding orphan sources. Investigations revealed that one Am-Be and three (137)Cs sources in the container were subject to extensive heat due to burning of the container and melting of the paraffin content of the container; consequently, sources were stuck to the side wall of the container, but they were still undamaged and no radioactive leaking had occurred. Further investigations showed that the container had been given to the above mentioned centre a long time before by a foreign well-logging company without notifying the Regulatory Authority. Follow-up measurements and assessments indicated that the collective effective dose due to the accident is unlikely to be more than 21 mSv; consequently, no severe deterministic effect to individuals was expected. The findings showed that the main reasons for the accident were as follows: (1) violation of obligation under radiation protection regulations by the owner of the sources; (2) leaving the sources in an improper storage condition; (3) unauthorised access to the radiation sources at the owner centre; and (4) lack of an integrated national registration system in the Regulatory Authority.

Promoting the safety performance of industrial radiography using a quantitative assessment system.

The increasing number of industrial radiographers and their considerable occupational exposure has been one of the main concerns of the Iran Nuclear Regulatory Authority (INRA) in recent years. In 2002, a quantitative system of evaluating the safety performance of licensees and a complementary enforcement system was introduced by the National Radiation Protection Department (NRPD). Each parameter of the practice is given a weighting factor according to its importance to safety. Assessment of the licensees is done quantitatively by summing up their scores using prepared tables. Implementing this system of evaluation showed a considerable decrease in deficiencies in the various centres. Tables are updated regularly as a result of findings during the inspections. This system is used in addition to enforcement to promote safety performance and to increase the culture of safety in industrial radiography.

Survey on lost and poorly controlled radioactive sources in non-medical applications in Iran.

Despite well-developed Regulatory Authority systems for radiation protection, there are some concerns about lost-controlled and poorly controlled radioactive sources owing to abundance and dispersion of the users. This survey covers the current situation of the categories 3 through 5 of radioactive sources (based on the categorisation of the IAEA) in non-medical applications in Iran. The investigation performed on a selected group of non-medical users of radioactive sources in different provinces of Iran. Findings show that unauthorised supply and legacy sources in addition to abandonment of sources under regulatory control are the main reasons for lost-controlled sources. Considering the possibility of increasing poorly controlled sources which can lead to increase in the number of lost-controlled sources, further developments are needed in national regulatory control as well as international cooperation and discipline in this regard.