Leaching properties of electric arc furnace dust prior/following alkaline extraction.

This study was carried out to determine the appropriate treatment of electric arc furnace (EAF) dust prior to permanent disposal. The total heavy metal content as well as heavy metal leaching from EAF dust was investigated in five composite samples obtained from three Croatian and Slovenian steelworks. In order to recover zinc and reduce its leaching from the dust, all five samples were submitted to alkaline extraction with 10 M NaOH. Reduction of Cr (VI) to Cr(III) was conducted using FeSO4 x 7H2O solution. The elements Mn, Fe, Cu, Ni, and notably Zn and Pb, exhibited highest mobility during toxicity characteristic leaching procedure (TCLP). Comparing to TCLP extracts of initial EAF dust, zinc was found to be over 15 times lower and lead over 200 times lower in TCLP extracts of EAF dust processed by the alkaline leaching method. Since Cr (VI) exceeded its permissible level in the DIN 38414-S4 extracts of both initial and alkaline digested dust, its reduction to Cr (III) prior to permanent disposal is necessary. The recovery of zinc from EAF dust treated with alkaline agent ranged from 50.3% to 73.2%. According to phase analysis, recovery yield showed dependence on zincite/franklinite ratio. The results of the study indicate that permanent disposal of EAF dust require the following procedure: alkaline digestion (followed by leachate purification and alkaline zinc electrolyses), chromate reduction (if necessary), solidification of leaching residue and its testing using the leaching analyses.

[Radioactivity monitoring of steel processing in Croatian steel mills and foundries]. / Potreba uvodenja nadzora radioaktivnosti u procesima proizvodnje celika hrvatskih celicana i ljevaonica.

The last twenty years have seen a number of cases of radioactive pollution in metallurgical industry. Therefore many metal producers have implemented systematic monitoring of radioactivity in their production processes, especially in steel processing, steel being the most applied construction material with the annual world output of over billion tonnes. Learning from the experience of the best known steel producers in Europe and the world Croatian steel mills have introduced radioactivity surveillance and control systems for radioactive elements in steel scrap, semi-finished and finished products. This paper argues in favour of radioactivity surveillance and control systems in steel and steel castings production in Croatia, and describes current systems and solutions available. Since we lack our own standards and regulations to control both domestic and imported steel scrap, semi-finished products (crude steel, hot and cold rolled strip) and finished products, we need to start implementing radioactivity surveillance and control systems in our steel and steel castings production applying the current international recommendations and guidelines, until we build up our own monitoring system and adopt legislation on the national level. This paper gives an overview of the basic types of radioactivity surveillance and control systems, the most frequent requirements to be met, as well as of the measurement and information flow in their application in steel and steel castings production.

Characterization of steel mill electric-arc furnace dust.

In order to make a complete characterization of electric-arc furnace (EAF) dust, as hazardous industrial waste, and to solve its permanent disposal and/or recovery, bearing in mind both the volumes formed in the Croatian steel industry and experiences of developed industrial countries, a study of its properties was undertaken. For this purpose, samples of EAF dust, taken from the regular production process in the Zeljezara Sisak Steel Mill between December 2000 and December 2001, were subjected to a series of tests. The chemical composition of EAF dust samples was investigated by means of a several different analytical methods. The results from the chemical analysis show that the approximate order of abundance of major elements in EAF dusts is as follows: Fe, Zn, Mn, Ca, Mg, Si, Pb, S, Cr, Cu, Al, C, Ni, Cd, As and Hg. Granular-metric composition of single samples was determined by applying sieve separation. Scanning electron micro-structural examination of EAF dust microstructure was performed and results indicated that all twelve EAF dusts were composed of solid spherical agglomerates with Fe, Zn, Pb, O, Si and Ca as the principal element. The investigation of grain morphology and the mineralogical composition of EAF dust were taken by combination of high resolution Auger electron spectroscopy (HR AES), X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction analysis. The analysis of XPS-spectra determined the presence of zinc in the form of ZnO phase and the presence of lead in the form of PbO phase, i.e. PbSO3/PbSO4 forms. The results of the X-ray diffraction phase analysis show that the basis of the examined EAF dust samples is made of a mixture of metal oxides, silicates and sulphates. The metal concentration, anions, pH value and conductivity in water eluates was determined in order to define the influence of EAF dust on the environment.