CRISPR-Cas9 mediated engineering of Bacillus licheniformis for industrial production of (2R,3S)-butanediol.

Bacillus lichenformis is an industrially promising generally recognized as safe (GRAS) strain that can be used for the production of a valuable chemical, 2,3-butanediol (BDO). Conventional gene deletion vectors and/or methods are time-consuming and have poor efficiency. Therefore, clustered regularly interspaced short palindromic repeat (CRISPR)-Cas9 mediated homologous recombination was used to engineer a newly isolated and UV-mutagenized B. licheniformis 4071-15 strain. With the help of a CRISPR-Cas9 system, this one-step process could be used for the deletion of ldh gene within 4 days with high-efficiency exceeding 60%. In addition, the sequential deletion of target genes for engineering studies was evaluated, and it was confirmed that a triple mutant strain (ldh, dgp, and acoR) could be obtained by repeated one-step cycles. Furthermore, a practical metabolic engineering study was carried out using a CRISPR-Cas9 system for the stereospecific production of (2R,3S)-BDO. The predicted (2R,3R)-butanediol dehydrogenase encoded by the gdh gene was selected as a target for the production of (2R,3S)-BDO, and the mutant was successfully obtained. The results show that the stereospecific production of (2R,3S)-BDO was possible with the gdh deletion mutant, while the 4071-15 host strain still generated 26% of (2R,3R)-BDO. It was also shown that the 4071-15 Δgdh mutant could produce 115 g/L of (2R,3S)-BDO in 64 hr by two-stage fed-batch fermentation. This study has shown the efficient development of a (2R,3S)-BDO producing B. licheniformis strain based on CRISPR-Cas9 and fermentation technologies.

Isolation and Evaluation of Bacillus Strains for Industrial Production of 2,3-Butanediol.

Biologically produced 2,3-butanediol (2,3-BDO) has diverse industrial applications. In this study, schematic isolation and screening procedures were designed to obtain generally regarded as safe (GRAS) and efficient 2,3-BDO producers. Over 4,000 candidate strains were isolated by pretreatment and enrichment, and the isolated Bacillus strains were further screened by morphological, biochemical, and genomic analyses. The screened strains were then used to test the utilization of the most common carbon (glucose, xylose, fructose, sucrose) and nitrogen (yeast extract, corn steep liquor) sources for the economical production of 2,3-BDO. Two-stage fed-batch fermentation was finally carried out to enhance 2,3-BDO production. In consequence, a newly isolated Bacillus licheniformis GSC3102 strain produced 92.0 g/l of total 2,3-BDO with an overall productivity and yield of 1.40 g/l/h and 0.423 g/g glucose, respectively, using a cheap and abundant nitrogen source. These results strongly suggest that B. licheniformis, which is found widely in nature, can be used as a host strain for the industrial fermentative production of 2,3-BDO.

Metabolic engineering of Klebsiella pneumoniae based on in silico analysis and its pilot-scale application for 1,3-propanediol and 2,3-butanediol co-production.

Klebsiella pneumoniae naturally produces relatively large amounts of 1,3-propanediol (1,3-PD) and 2,3-butanediol (2,3-BD) along with various byproducts using glycerol as a carbon source. The ldhA and mdh genes in K. pneumoniae were deleted based on its in silico gene knockout simulation with the criteria of maximizing 1,3-PD and 2,3-BD production and minimizing byproducts formation and cell growth retardation. In addition, the agitation speed, which is known to strongly affect 1,3-PD and 2,3-BD production in Klebsiella strains, was optimized. The K. pneumoniae ΔldhA Δmdh strain produced 125 g/L of diols (1,3-PD and 2,3-BD) with a productivity of 2.0 g/L/h in the lab-scale (5-L bioreactor) fed-batch fermentation using high-quality guaranteed reagent grade glycerol. To evaluate the industrial capacity of the constructed K. pneumoniae ΔldhA Δmdh strain, a pilot-scale (5000-L bioreactor) fed-batch fermentation was carried out using crude glycerol obtained from the industrial biodiesel plant. The pilot-scale fed-batch fermentation of the K. pneumoniae ΔldhA Δmdh strain produced 114 g/L of diols (70 g/L of 1,3-PD and 44 g/L of 2,3-BD), with a yield of 0.60 g diols per gram glycerol and a productivity of 2.2 g/L/h of diols, which should be suitable for the industrial co-production of 1,3-PD and 2,3-BD.

Effects of mutation of 2,3-butanediol formation pathway on glycerol metabolism and 1,3-propanediol production by Klebsiella pneumoniae J2B.

The current study investigates the impact of mutation of 2,3-butanediol (BDO) formation pathway on glycerol metabolism and 1,3-propanediol (PDO) production by lactate dehydrogenase deficient mutant of Klebsiella pneumoniae J2B. To this end, BDO pathway genes, budA, budB, budC and budO (whole-bud operon), were deleted from K. pneumoniae J2B ΔldhA and the mutants were studied for glycerol metabolism and alcohols (PDO, BDO) production. ΔbudO-mutant-only could completely abolish BDO production, but with reductions in cell growth and PDO production. By modifying the culture medium, the ΔbudO mutant could recover its performance on the flask scale. However, in bioreactor experiments, the ΔbudO mutant accumulated a significant amount of pyruvate (>73mM) in the late phase and PDO production stopped concomitantly. Glycolytic intermediates of glycerol, especially glyceraldehyde-3-phosphate (G3P) was highly inhibitory to glycerol dehydratase (GDHt); its accumulation, followed by pyruvate accumulation, was assumed to be responsible for the ΔbudO mutant's low PDO production.

Metabolic engineering of Klebsiella pneumoniae and in silico investigation for enhanced 2,3-butanediol production.

OBJECTIVES: To improve the production of 2,3-butanediol (2,3-BD) in Klebsiella pneumoniae, the genes related to the formation of lactic acid, ethanol, and acetic acid were eliminated. RESULTS: Although the cell growth and 2,3-BD production rates of the K. pneumoniae ΔldhA ΔadhE Δpta-ackA strain were lower than those of the wild-type strain, the mutant produced a higher titer of 2,3-BD and a higher yield in batch fermentation: 91 g 2,3-BD/l with a yield of 0.45 g per g glucose and a productivity of 1.62 g/l.h in fed-batch fermentation. The metabolic characteristics of the mutants were consistent with the results of in silico simulation. CONCLUSIONS: K. pneumoniae knockout mutants developed with an aid of in silico investigation could produce higher amounts of 2,3-BD with increased titer, yield, and productivity.

Enhanced production of (R,R)-2,3-butanediol by metabolically engineered Klebsiella oxytoca.

Microbial fermentation produces a racemic mixture of 2,3-butanediol ((R,R)-BD, (S,S)-BD, and meso-BD), and the compositions and physiochemical properties vary from microorganism to microorganism. Although the meso form is much more difficult to transport and store because of its higher freezing point than those of the optically active forms, most microorganisms capable of producing 2,3-BD mainly yield meso-2,3-BD. Thus, we developed a metabolically engineered (R,R)-2,3-BD overproducing strain using a Klebsiella oxytoca ΔldhA ΔpflB strain, which shows an outstanding 2,3-BD production performance with more than 90 % of the meso form. A budC gene encoding 2,3-BD dehydrogenase in the K. oxytoca ΔldhA ΔpflB strain was replaced with an exogenous gene encoding (R,R)-2,3-BD dehydrogenase from Paenibacillus polymyxa (K. oxytoca ΔldhA ΔpflB ΔbudC::PBDH strain), and then its expression level was further amplified with using a pBBR1MCS plasmid. The fed-batch fermentation of the K. oxytoca ΔldhA ΔpflB ΔbudC::PBDH (pBBR-PBDH) strain with intermittent glucose feeding allowed the production of 106.7 g/L of (R,R)-2,3-BD [meso-2,3-BD, 9.3 g/L], with a yield of 0.40 g/g and a productivity of 3.1 g/L/h, which should be useful for the industrial application of 2,3-BD.

Identification of acetoin reductases involved in 2,3-butanediol pathway in Klebsiella oxytoca.

The acetoin reductase (AR) of Klebsiella oxytoca is responsible for converting acetoin into 2,3-butanediol (2,3-BDO) during sugar fermentation. Deleting the AR encoding gene (budC) in the 2,3-BDO operon does not block production of 2,3-BDO, as another similar gene exists in addition to budC called diacetyl/acetoin reductase (dar) which shares 53% identity with budC. In the present study, both budC and dar of K. oxytoca were independently cloned and expressed in Escherichia coli along with budA (acetolactate decarboxylase) and budB (acetolactate synthase), which are responsible for converting pyruvate into acetoin. The recombinant E. coli expressing budABC and budAB-dar produced 2,3-BDO from glucose but E. coli expressing only budAB did not and produced acetoin alone. This demonstrates that Dar functions similar to BudC. Mutants of budC, dar, and both genes together were developed in K. oxytoca ΔldhA (lactate dehydrogenase). K. oxytoca ΔldhA ΔbudC Δdar, deficient in both AR genes, showed reduced 2,3-BDO concentration when compared to K. oxytoca ΔldhA and K. oxytoca ΔldhA ΔbudC by 84% and 69%, respectively. Interestingly, K. oxytoca ΔldhA Δdar resulted in a significant reduction in the reversible conversion of 2,3-BDO into acetoin than that of K. oxytoca ΔldhA, which was observed in a glucose depleted fermentation culture. In addition, we observed that Dar played a key role in dissimilation of 2,3-BDO in media containing 2,3-BDO alone.

Production of 3-hydroxypropionic acid from glycerol by recombinant Pseudomonas denitrificans.

3-Hydroxypropionic acid (3-HP) can be produced from glycerol through two sequential enzymatic reactions that are catalyzed by a coenzyme B12 -dependent glycerol dehydratase and an NAD(P)(+) -dependent aldehyde dehydrogenase (ALDH), respectively. Pseudomonas denitrificans synthesizes coenzyme B12 under aerobic conditions, where NAD(P)(+) is regenerated efficiently. Hence, it is considered an ideal host for the production of 3-HP from glycerol under aerobic conditions. In this study, recombinant strains of P. denitrificans were developed and their potential for the production of 3-HP from glycerol was evaluated. When the enzymes, glycerol dehydratase (DhaB) and glycerol dehydratase reactivase (GdrAB), of Klebsiella pneumoniae were expressed heterologously, P. denitrificans could produce 3-HP at 37.7 mmol/L with 62% (mol/mol) yield on glycerol. Glucose was required as the carbon and energy sources for cell growth. The overexpression of heterologous ALDH was not essential; however, the titer and yield of 3-HP were improved to 54.7 mmol/L and 67% (mol/mol), respectively, when an ALDH gene (puuC) from K. pneumoniae was overexpressed. One serious drawback hindering the use of P. denitrificans as a recombinant host for 3-HP production is that it oxidizes 3-HP to malonate and utilizes 3-HP as a carbon source for growth. This is the first report on the development and use of recombinant P. denitrificans for 3-HP production from glycerol.

Metabolic engineering of a novel Klebsiella oxytoca strain for enhanced 2,3-butanediol production.

Fermentative 2,3-butanediol (2,3-BD) production has been receiving increasing interest for its potential as a platform chemical intended for the production of synthetic rubbers, plastics, and solvents. In this study, Klebsiella oxytoca GSC 12206, a 2,3-BD native hyper-producing and nonpathogenic bacterium, was isolated from a cattle farm. Since this isolate produced a significant amount of lactic acid along with 2,3-BD, its mutant deficient in lactic acid formation was constructed by disrupting the ldhA gene which encodes lactate dehydrogenase. The ldhA gene was deleted precisely by using the pKGS plasmid. When compared to the wild-type strain, the mutant deleted with the ldhA gene in glucose fermentation resulted in an increase of 54%, 13%, 60%, and 78% of 2,3-BD titer, productivity, yield, and selectivity, respectively. A fed-batch fermentation by this mutant with intermittent glucose feeding produced 115 g/L of 2,3-BD with an yield and productivity of 0.41 g 2,3-BD per g glucose and 2.27 g/L h, respectively, indicating the usefulness for the industrial production of 2,3-BD.

Fermentation and evaluation of Klebsiella pneumoniae and K. oxytoca on the production of 2,3-butanediol.

Klebsiella is one of the genera that has shown unbeatable production performance of 2,3-butanediol (2,3-BD), when compared to other microorganisms. In this study, two Klebsiella strains, K. pneumoniae (DSM 2026) and K. oxytoca (ATCC 43863), were selected and evaluated for 2,3-BD production by batch and fed-batch fermentations using glucose as a carbon source. Those strains' morphologies, particularly their capsular structures, were analyzed by scanning electron microscopy (SEM). The maximum titers of 2,3-BD by K. pneumoniae and K. oxytoca during 10 h batch fermentation were 17.6 and 10.9 g L(-1), respectively; in fed-batch cultivation, the strains showed the maximum titers of 50.9 and 34.1 g L(-1), respectively. Although K. pneumoniae showed higher productivity, SEM showed that it secreted large amounts of capsular polysaccharide, increasing pathogenicity and hindering the separation of cells from the fermentation broth during downstream processing.

Production of 3-hydroxypropionic acid via malonyl-CoA pathway using recombinant Escherichia coli strains.

Malonyl-CoA is an intermediary compound that is produced during fatty acid metabolism. Our study aimed to produce the commercially important platform chemical 3-hydroxypropionic acid (3-HP) from its immediate precursor malonyl-CoA by recombinant Escherichia coli strains heterologously expressing the mcr gene of Chloroflexus aurantiacus DSM 635, encoding an NADPH-dependent malonyl-CoA reductase (MCR). The recombinant E. coli overexpressing mcr under the T5 promoter showed MCR activity of 0.015 U mg⁻¹ protein in crude cell extract and produced 0.71 mmol/L of 3-HP in 24h in shake flask cultivation under aerobic conditions with glucose as the sole source of carbon. When acetyl-CoA carboxylase and biotinilase, encoded by the genes accADBCb (ACC) of E. coli K-12 were overexpressed along with MCR, the final 3-HP titer improved by 2-fold, which is 1.6 mM. Additional expression of the gene pntAB, encoding nicotinamide nucleotide transhydrogenase that converts NADH to NADPH, increased 3-HP production to 2.14 mM. The strain was further developed by deleting the sucAB gene, encoding α-ketoglutarate dehydrogenase complex in tricarboxylic acid (TCA) cycle, or blocking lactate and acetate production pathways, and evaluated for the production of 3-HP. We report on the feasibility of producing 3-HP from glucose through the malonyl-CoA pathway.

Development of recombinant Klebsiella pneumoniae ∆dhaT strain for the co-production of 3-hydroxypropionic acid and 1,3-propanediol from glycerol.

Klebsiella pneumoniae converts glycerol to the specialty chemical 1,3-propanediol (1,3-PDO), which is used for the production of polytrimethylene terepthalate (PTT). In this study, an NAD(+)-dependent gamma-glutamyl-gamma-aminobutyraldehyde dehydrogenase (PuuC) of K. pneumoniae DSM 2026, which oxidizes 3-hydroxypropionaldehyde to a platform chemical 3-hydroxypropionic acid (3-HP), was cloned and overexpressed in K. pneumoniae DSM 2026 for the co-production of 3-HP and 1,3-PDO from glycerol. In addition, the gene dhaT, encoding NADH-dependent 1,3-propanediol oxidoreductase (1,3-PDOR), was deleted from the chromosome for the balanced production of 3-HP and 1,3-PDO. The recombinant K. pneumoniae ∆dhaT, expressing puuC, produced 3.6 g 3-HP and 3.0 g 1,3-PDO per liter with an average yield of 81% on glycerol carbon in shake flask culture under microaerobic conditions. When a fed-batch culture was carried out under microaerobic conditions at pH 7.0 in a 5-l bioreactor, the recombinant K. pneumoniae ∆dhaT (puuC) strain produced 16.0 g 3-HP and 16.8 g 1,3-PDO per liter with a cumulative yield of 51% on glycerol carbon in 24 h. The production of 1,3-PDO in the dhaT-deletion mutant was attributed to the expression of NAD(P)H-dependent hypothetical oxidoreductase. This study demonstrates the feasibility of obtaining two commercially valuable chemicals, 3-HP and 1,3-PDO, at a significant scale.

Development and evaluation of efficient recombinant Escherichia coli strains for the production of 3-hydroxypropionic acid from glycerol.

3-Hydroxypropionic acid (3-HP) is a commercially valuable chemical with the potential to be a key building block for deriving many industrially important chemicals. However, its biological production has not been well documented. Our previous study demonstrated the feasibility of producing 3-HP from glycerol using the recombinant Escherichia coli SH254 expressing glycerol dehydratase (DhaB) and aldehyde dehydrogenase (AldH), and reported that an "imbalance between the two enzymes" and the "instability of the first enzyme DhaB" were the major factors limiting 3-HP production. In this study, the efficiency of the recombinant strain(s) was improved by expressing DhaB and AldH in two compatible isopropyl-thio-beta-galactoside (IPTG) inducible plasmids along with glycerol dehydratase reactivase (GDR). The expression levels of the two proteins were measured. It was found that the changes in protein expression were associated with their enzymatic activity and balance. While cloning an alternate aldehyde dehydrogenase (ALDH), alpha-ketoglutaric semialdehyde dehydrogenase (KGSADH), instead of AldH, the recombinant E. coli SH-BGK1 showed the highest level of 3-HP production (2.8 g/L) under shake-flask conditions. When an aerobic fed-batch process was carried out under bioreactor conditions at pH 7.0, the recombinant SH-BGK1 produced 38.7 g 3-HP/L with an average yield of 35%. This article reports the highest level of 3-HP production from glycerol thus far.

Effect of process parameters on 3-hydroxypropionic acid production from glycerol using a recombinant Escherichia coli.

The top-valued platform chemical, 3-hydroxypropionic acid (3-HP), has a wide range of industrial applications but its biological production is not well established. Previously, the production of 3-HP from glycerol was demonstrated using a recombinant Escherichia coli strain expressing glycerol dehydratase (dhaB) and aldehyde dehydrogenase (aldH). The present investigation focuses on the effect of the culture conditions on the production of 3-HP from glycerol. The physicochemical parameters, such as pH, IPTG concentration, liquid-to-flask volume ratio, and substrate concentration, were examined in flask-scale experiments and obtained the highest titer of 3-HP at 4.4 g l(-1) in 48 h. When a fed-batch process was carried out in a bioreactor under pH-regulated conditions, the recombinant E. coli produced 3-HP at 31 g l(-1) in 72 h with a yield of 0.35 mol mol(-1) glycerol. The maximum specific rate of 3-HP production was estimated to be 3.41 mmol g(-1) cdw h(-1) between 12 and 24 h. Other than 3-HP, propionic acid (3.4 g l(-1)), 1,3-propanediol (2.4 g l(-1)), and lactic acid (1.6 g l(-1)) were produced as the major by-products. This paper reports for the first time a commercially meaningful high titer of 3-HP production.

Cloning, expression, and characterization of an aldehyde dehydrogenase from Escherichia coli K-12 that utilizes 3-Hydroxypropionaldehyde as a substrate.

3-Hydroxypropionaldehyde (3-HPA), an intermediary compound of glycerol metabolism in bacteria, serves as a precursor to 3-Hydroxypropionic acid (3-HP), a commercially valuable platform chemical. To achieve the effective conversion of 3-HPA to 3-HP, an aldH gene encoding an aldehyde dehydrogenase in Escherichia coli K-12 (AldH) was cloned, expressed, and characterized for its properties. The recombinant AldH exhibited broad substrate specificity for various aliphatic and aromatic aldehydes. AldH preferred NAD+ over NADP+ as a cofactor for the oxidation of most aliphatic aldehydes tested. Among the aldehydes used, the specific activity was highest (38.1 U mg(-1) protein) for 3-HPA at pH 8.0 and 37 degrees C. The catalytic efficiency (kcat) and the specificity constant (kcat/Km) for 3-HPA in the presence of NAD+ were 28.5 s(-1) and 58.6x10(3) M(-1) s(-1), respectively. The AldH activity was enhanced in the presence of disulfide reductants such as dithiothreitol (DTT) or 2-mercaptoethanol, while several metal ions, particularly Hg2+, Ag+, Cu2+, and Zn2+, inhibited AldH activity. This study illustrates that AldH is a potentially useful enzyme in converting 3-HPA to 3-HP.