Rapid degradation of FOG discharged from food industry wastewater by lipolytic fungi as a bioaugmentation application.

Fats, oils and grease (FOG) congregate in grease traps and are a slowly biodegradable particulate organic matter, which may require enzymatic or hydrolytic conversion to form readily biodegradable soluble organic matter. The existing treatment methods employ water-based hydrolysis of FOG to form long-chain fatty acids (LCFAs). The LCFAs discharged into wastewater treatment system create functional difficulties, especially the inhibitory effect caused by accumulation of LCFAs. This study aims to find an effective treatment method for this persistent problem encountered in conventional wastewater treatment system. Solid-state degradation by lipolytic fungi was performed in a tray-type reactor as a novel approach of bioaugmentation. Grease trap waste samples were dried to have moisture content of 25-35% and mixed with coir fiber (1% w/v) for proper aeration. Each 10 mg/g dry weight of substrate was inoculated with 1 mL of spore suspension (1 × 107 spores/mL) of lipolytic fungi. Thereafter, moisture content in the reactor was increased to 65%, and incubated at 30°C. Within 72 h of post incubation, degradation efficiency of about 50% was recorded by fungal isolates. The feasibility of using developed protocol for FOG degradation was tested with a laboratory-scale prototype reactor.

Test burn with PCB-oil in a local cement kiln in Sri Lanka.

The production and use of polychlorinated biphenyls (PCBs) have ceased and most developed countries have disposed off their stocks long time ago. PCBs can however still be found in the environment and one important source is accumulated stocks in developing countries. Sound treatment of PCB is costly and most developing countries do not have dedicated hazardous waste incinerators or non-combustion technologies available for domestic disposal and can usually not afford export. High temperature cement kilns have been used to treat organic hazardous wastes in developed countries for decades and shown to constitute a sound option if well managed and controlled. In contrast to dedicated hazardous waste incinerators and other treatment techniques, cement kilns are already in place in virtually every country and may constitute a treatment option. The objective of this study was therefore to carry out the first test burn with PCB-oil in a developing country cement kiln and to assess its feasibility and destruction performance. The 3 d test burn demonstrated that the Sri Lankan cement kiln was able to destroy PCB in an irreversible and environmental sound manner without causing any new formation of PCDD/PCDF or HCB. The destruction and removal efficiency (DRE) was better than 99.9999% at the highest PCB feeding rate.