Frequency doubling and parametric fluorescence in a four-port aluminum gallium arsenide photonic chip.

In this Letter, we report on the fabrication and characterization of a monolithic III-V semiconductor photonic chip, designed to perform nonlinear parametric optical processes for frequency conversion and non-classical state generation. This chip co-integrates an AlGaAs microdisk that is evanescently coupled to two distinct suspended waveguides designed for light injection and collection around 1600 nm and 800 nm, respectively. Quasi-phase matching provided by the resonator geometry and material symmetry, resonant field enhancement, and confinement ensure efficient nonlinear interactions. We demonstrate second-harmonic generation efficiency of 5%W-1 and a biphoton generation rate of 1.2 kHz/µW through spontaneous down-conversion.

Directionally induced quasi-phase matching in homogeneous AlGaAs waveguides.

We report on the experimental observation of quasi-phase matching in a homogeneous waveguide. By fabricating a monolithic snake-shaped suspended AlGaAs nanowire on a (001) GaAs wafer, we demonstrate the unraveled version of a χ(2) whispering-gallery-mode microdisk, obtaining second-harmonic generation in the optical telecom wavelength range. With a radius of curvature of 50 µm and four spatial oscillations along the (110) average direction, a splitting of the second-harmonic spectrum occurs around the phase-matching wavelength of the corresponding straight waveguide. This splitting, which increases as the radius of curvature decreases, provides a useful degree of freedom for the design of small-footprint nonlinear photonic devices on-chip.

Controlling second-harmonic generation at the nanoscale with monolithic AlGaAs-on-AlOx antennas.

We review recent achievements in the field of nanoscale nonlinear AlGaAs photonics based on all-dielectric optical antennas. After discussing the motivation and main technological challenges for the development of an AlGaAs monolithic platform for χ (2) nonlinear nanophotonics, we present numerical and experimental investigations of the second-order nonlinear response and physical reasons for high efficiency of second-order nonlinear interactions in the AlGaAs nano-antennas. In particular, we emphasize the role of the dipolar resonances at the fundamental frequency and the multipolar resonances at the second harmonic wavelength. We also discuss second-harmonic generation directionality and show possible strategies to engineer the radiation pattern of nonlinear antennas.

Polarization properties of second-harmonic generation in AlGaAs optical nanoantennas.

Manipulating light at the nanoscale by means of dielectric nanoantennas recently received renewed attention thanks to the development of key enabling fabrication tools in semiconductor technology, combined with the extremely low losses exhibited by dielectrics in the optical regime. Nanostructures based on III-V type semiconductors, characterized by an intrinsic broken symmetry down to a single elementary cell, has already demonstrated remarkable nonlinear conversion efficiencies at scales well below the operating wavelength. In this Letter, we thoroughly investigate the emission properties of second-harmonic generation (SHG) in AlGaAs monolithic nanoantennas. Our findings point toward the pivotal role of volume susceptibility in SHG, further unraveling the physics behind the nonlinear processes in these systems. The extremely high SHG efficiency attained, together with the control over the polarized emission in these nanoantennas, constitute key ingredients for the development of tunable nonlinear metasurfaces.

High-Q resonant cavities for terahertz quantum cascade lasers.

We report on the realization and characterization of two different designs for resonant THz cavities, based on wire-grid polarizers as input/output couplers, and injected by a continuous-wave quantum cascade laser (QCL) emitting at 2.55 THz. A comparison between the measured resonators parameters and the expected theoretical values is reported. With achieved quality factor Q ≈ 2.5 × 10(5), these cavities show resonant peaks as narrow as few MHz, comparable with the typical Doppler linewidth of THz molecular transitions and slightly broader than the free-running QCL emission spectrum. The effects of the optical feedback from one cavity to the QCL are examined by using the other cavity as a frequency reference.

Mid-infrared digital holography and holographic interferometry with a tunable quantum cascade laser.

Mid-infrared digital holography based on CO2 lasers has proven to be a powerful coherent imaging technique due to reduced sensitivity to mechanical vibrations, increased field of view, high optical power, and possible vision through scattering media, e.g., smoke. Here we demonstrate a similar and more compact holographic system based on an external cavity quantum cascade laser emitting at 8 µm. Such a setup, which includes a highly sensitive microbolometric camera, allows the acquisition of speckle holograms of scattering objects, which can be processed in real time. In addition, by exploiting the broad laser tunability, we can acquire holograms at different wavelengths, from which we extract phase images not subjected to phase wrapping, at synthetic wavelengths ranging from hundreds of micrometers to several millimeters.

Measurement of the intrinsic linewidth of terahertz quantum cascade lasers using a near-infrared frequency comb.

We report the measurement of the frequency noise power spectral density of a quantum cascade laser emitting at 2.5THz. The technique is based on heterodyning the laser emission frequency with a harmonic of the repetition rate of a near-infrared laser comb. This generates a beatnote in the radio frequency range that is demodulated using a tracking oscillator allowing measurement of the frequency noise. We find that the latter is strongly affected by the level of optical feedback, and obtain an intrinsic linewidth of ~230Hz, for an output power of 2mW.

Phase-locking of a 2.5 THz quantum cascade laser to a frequency comb using a GaAs photomixer.

We report the heterodyne detection and phase locking of a 2.5 THz quantum cascade laser (QCL) using a terahertz frequency comb generated in a GaAs photomixer using a femtosecond fiber laser. With 10 mW emitted by the QCL, the phase-locked signal at the intermediate frequency yields 80 dB of signal-to-noise ratio in a bandwidth of 1 Hz.