Effect and mechanism of ultrasound on acid loading in the preparation of silicon-based sulfonic solid acids.

Silicon-based sulfonic solid acids have the advantages of high catalytic activity and selectivity, easy separation from products, low equipment corrosion, and environmental protection, and sulfuric acid loading is the key to their preparation. To overcome the shortcomings of low acid loading and uneven distribution in the existing preparation methods of micron-sized silicon-based sulfonic solid acids, a method was proposed to prepare micron-sized silicon-based sulfonic solid acids using ultrasonic enhanced technology. The effect of different reaction parameters, such as time, power, and temperature of ultrasonication, sulfonation temperature and time, and sulfuric acid concentration, on acid loading in solid acid was investigated in this work. The results showed that a micron-sized mesoporous silica-based solid acid was successfully synthesized with a high acid content of 0.8633 mmol/g, uniform acid distribution, high specific surface area of 269.332 m2/g, and large average particle size of 172.142 µm in this work. The introduction of ultrasound was found to expand the carrier's pore volume and increase the carrier's specific surface area and the number of hydroxyl groups, thereby increasing the acid loading capacity and the specific surface area of the solid acid sample by 66.6 % and 10.97 % respectively, compared with the case without ultrasound.

Treatment of complex sulfur-containing solutions in ammonia desulfurization ammonium sulfate production by ultrasonic-assisted ozone technology.

In this work, the cause of abnormal color in ammonium sulfate products formed by flue gas desulfurization is revealed by investigating the conversion relationship between different sulfur-containing ions and their behavior in a sulfuric acid medium. Both thiosulfate (S2O32-) and sulfite (SO32- ＆ HSO3-) impurities affect the quality of ammonium sulfate. The S2O32- is the main reason for the yellowing of the product due to the formation of sulfur impurities in concentrated sulfuric acid. To address the yellowing of ammonium sulfate products, a unified technology (US/O3), using ozone (O3) and ultrasonic waves (US) simultaneously, is exploited to remove both thiosulfate and sulfite impurities from the mother liquor. The effect of different reaction parameters on the degree of removal of thiosulfate and sulfite is investigated. The synergistic effect of ultrasound and ozone on ion oxidation is further explored and demonstrated by the comparative experiments with O3 and US/O3. Under the optimized conditions, the thiosulfate and sulfite concentration in the solution is 2.07 and 5.93 g/L, respectively, and the degree of removal is 91.39 and 90.83%, respectively. The product obtained after evaporation and crystallization is pure white and meets the national standard requirements for ammonium sulfate products. Under the same conditions, the US/O3 process has apparent advantages, such as saving reaction time compared with the O3 process alone. Introducing an ultrasonically intensified field improves the generation of oxidation radicals ·OH, 1O2, and ·O2- in the solution. Furthermore, the effectiveness of different oxidation components in the decolorization process is studied by adding other radical shielding agents using the US/O3 process supplemented with EPR analysis. The order of the different oxidation components is O3(86.04%) > 1O2(6.53%) > â€¢OH(4.45%) > â€¢O2-(2.97%) for the oxidation of thiosulfate, and it is O3(86.28%) > â€¢OH(7.49%) > 1O2(4.99%) > â€¢O2-(1.25%) for the oxidation of sulfite.

Laser induced structural phase transformation of cobalt oxides nanostructures.

Face-centered-cubic (fcc) and hexagonal-close-packed (hcp) phases of cobalt monoxide (CoO) nanostructures are prepared using thermolysis route at the same reaction temperature 296 degrees C with synthetic approach conditions. These nanostructures show mixture of nearly spherical and nanoflake morphologies. The structural phases of these nanostructures transform to spinel-Co3O4 by application of heat or Raman excitation laser beam power. The absorbance spectra of fcc and hcp-CoO and Co3O4 nanostructures yield significantly higher values of band gap which can be explained by electron confinement. Such results provide new opportunities for optimizing and enhancing the properties and performance of cobalt oxide nanomaterial.