Picosecond carrier dynamics in InAs and GaAs revealed by ultrafast electron microscopy.

Understanding the limits of spatiotemporal carrier dynamics, especially in III-V semiconductors, is key to designing ultrafast and ultrasmall optoelectronic components. However, identifying such limits and the properties controlling them has been elusive. Here, using scanning ultrafast electron microscopy, in bulk n-GaAs and p-InAs, we simultaneously measure picosecond carrier dynamics along with three related quantities: subsurface band bending, above-surface vacuum potentials, and surface trap densities. We make two unexpected observations. First, we uncover a negative-time contrast in secondary electrons resulting from an interplay among these quantities. Second, despite dopant concentrations and surface state densities differing by many orders of magnitude between the two materials, their carrier dynamics, measured by photoexcited band bending and filling of surface states, occur at a seemingly common timescale of about 100 ps. This observation may indicate fundamental kinetic limits tied to a multitude of material and surface properties of optoelectronic III-V semiconductors and highlights the need for techniques that simultaneously measure electro-optical kinetic properties.

True random number generation using the spin crossover in LaCoO3.

While digital computers rely on software-generated pseudo-random number generators, hardware-based true random number generators (TRNGs), which employ the natural physics of the underlying hardware, provide true stochasticity, and power and area efficiency. Research into TRNGs has extensively relied on the unpredictability in phase transitions, but such phase transitions are difficult to control given their often abrupt and narrow parameter ranges (e.g., occurring in a small temperature window). Here we demonstrate a TRNG based on self-oscillations in LaCoO3 that is electrically biased within its spin crossover regime. The LaCoO3 TRNG passes all standard tests of true stochasticity and uses only half the number of components compared to prior TRNGs. Assisted by phase field modeling, we show how spin crossovers are fundamentally better in producing true stochasticity compared to traditional phase transitions. As a validation, by probabilistically solving the NP-hard max-cut problem in a memristor crossbar array using our TRNG as a source of the required stochasticity, we demonstrate solution quality exceeding that using software-generated randomness.

Large CO2 reduction and enhanced thermal performance of agro-forestry, construction and demolition waste based fly ash bricks for sustainable construction.

The exhaust gases in production of burnt clay bricks is responsible for greenhouse gases (GHGs) emission which increase the carbon footprint in the ecosystem. Here, we report carbon emission and thermal performance based evaluation of 8 ft. × 9 ft. × 8 ft. building. The bricks used in building construction are manufactured from fly ash, agro-forestry wastes, construction & demolition wastes (C&D), ground granulated blast furnace slag (GGBFS) using NaOH as activator in order to provide compressive strength in the range of 3-6 MPa with ambient curing at 30 °C for 28 days. Life cycle analysis (LCA) reveals the total CO2 emission for fly ash and burnt clay bricks estimated to be 43.28 gCO2 and 290 gCO2 per brick, respectively. Considering the current scenario, by replacing 1-2% of brunt clay bricks with agro-forestry waste, C&D waste based fly ash bricks can potentially reduce 0.5-1.5 million tons of CO2 emission annually. The embodied energy calculation shows fly ash based bricks consumes 10-15 times less energy as compared to burnt clay bricks. Thermal paremeters viz., U-value (0.5-1.2 W/m2K), thermal conductivity (0.4-0.5 W/mK) show adequate insulation of agro-forestry waste based fly ash bricks highlighting its importance of thermal comfort, CO2 reduction along with sustainable and eco-friendly construction practices.

Exploring the pharmacological and chemical aspects of pyrrolo-quinazoline derivatives in Adhatoda vasica.

Adhatoda or Justicia is one of the biggest and complex genera of the Acanthaceae family. Adhatoda vasica is commonly known as 'Adosa'. It is an ayurvedic medicine with a medicinal history of more than a thousand years in India. Traditionally, it is used to treat cough, asthma, phlegm, bleeding hemorrhoids, for both adults and youth. This plant possesses antiarthritis, antiseptic, antimicrobial, anti-tuberculosis, anti-inflammatory and abortifacient properties. Alkaloids are the major phytoconstituents present in the plant in the form of pyrrolo-quinazoline derivatives viz vasicine, vasicinone, vasicinol, adhatodine, adhatodinine, adhavasinone and anisotine etc. The asserted objectives are to conduct a systematic review on the phytochemistry, pharmacology and traditional uses of A. vasica, as well as highlighting the challenges found in the research. This will promote the utilization of A. vasica at extract level and further development of new drug leads based on the compounds isolated and used for treatment of various ailments. The present review covers the literature survey from 1888 to 2023. The relevant data has been collected from various peer-reviwed journals, and books via Sci-Finder, PubMed, Science Direct, Google Scholar, EBSCO, online electronic journals, SpringerLink and Wiley. This paper aims to present a systematic review of known traditional applications, pharmacological and chemical aspects in Adhatoda vasica.

Insights into molecular mechanism of plasticizer biodegradation in Dietzia kunjamensis IITR165 and Brucella intermedia IITR166 isolated from a solid waste dumpsite.

AIMS: Isolation of phthalate esters (PAEs) degrading bacteria from a solid waste dumpsite could degrade many plasticizers efficiently and to investigate their degrading kinetics, pathways, and genes. METHODS AND RESULTS: Based on their 16S rRNA gene sequence the strains were identified as Dietzia kunjamensis IITR165 and Brucella intermedia IITR166, which showed a first-order degradation kinetic model under lab conditions. The quantification of phthalates and their intermediate metabolites identification were done by using ultra-high-performance liquid chromatography (UHPLC) and gas chromatography-tandem mass-spectrometry (GC-MS/MS), respectively. Both the bacteria utilized >99% dibutyl phthalate at a high concentration of 100-400 mg L-1 within 192 h as monitored by UHPLC. GC-MS/MS revealed the presence of metabolites dimethyl phthalate (DMP), phthalic acid (PA), and benzoic acid (BA) during DBP degradation by IITR165 while monobutyl phthalate (MBP) and PA were identified in IITR166. Phthalate esters degrading gene cluster in IITR165 comprised two novel genes coding for carboxylesterase (dkca1) and mono-alkyl phthalate hydrolase (maph), having only 37.47% and 47.74% homology, respectively, with reported phthalate degradation genes, along with the terephthalate dioxygenase system (tphA1, A2, A3, and B). However, IITR166 harbored different gene clusters comprising di-alkyl phthalate hydrolase (dph_bi), and phthalate dioxygenase (ophA, B, and C) genes. CONCLUSIONS: Two novel bacterial strains, Dietzia kunjamensis IITR165 and Brucella intermedia IITR166, were isolated and found to efficiently degrade DBP at high concentrations. The degradation followed first-order kinetics, and both strains exhibited a removal efficiency of over 99%. Metabolite analysis revealed that both bacteria utilized de-methylation, de-esterification, and decarboxylation steps during degradation.

Hsp27 over expression protect against cadmium induced nephrotoxicity in Drosophila melanogaster.

Cadmium (Cd) exposure to the animals including humans is reported as nephrotoxic compounds i.e., disturbing redox status (increase oxidative stress), mitochondrial dysfunction, renal cell death and altered transporters in the renal system. Hsp27 (a small heat shock protein) has been shown as one of the modulators in the renal dysfunction and increased against the Cd induced toxicity. However, no studies are reported on the genetic modulation of stress protein against the Cd-induced nephrotoxicity. The current study aimed to examine the protective role of hsp27 overexpression against the Cd-induced nephrotoxicity using Drosophila melanogaster as an animal model. D. melanogaster renal system includes nephrocytes and Malpighian tubules (MTs) that show the functional similarity with mammalian kidney nephron. Overexpression of the hsp27 was found to reduce the Cd induced oxidative stress, rescue cell death in MTs of Cd exposed D. melanogaster larvae. The rescued GSH level, NADPH level and glucose 6 phosphate dehydrogenase (G6PD) activity were also observed in the MTs of the Cd exposed organism. Function (efflux activity and fluid secretion rate) of the MTs was restored in Cd exposed hsp27 overexpressed larvae. Further, results were confirmed by restored brush border microvilli density and reduced uric acid level. Tissue specific knockdown of hsp27 developed Cd like phenotypes in MTs and the phenotypes enhanced in Cd exposed condition. The present study clearly shows the role of hsp27 overexpression in restoration of the MTs function and protection against the Cd induced renal toxicity.

Spatial Interactions in Hydrogenated Perovskite Nickelate Synaptic Networks.

A key aspect of how the brain learns and enables decision-making processes is through synaptic interactions. Electrical transmission and communication in a network of synapses are modulated by extracellular fields generated by ionic chemical gradients. Emulating such spatial interactions in synthetic networks can be of potential use for neuromorphic learning and the hardware implementation of artificial intelligence. Here, we demonstrate that in a network of hydrogen-doped perovskite nickelate devices, electric bias across a single junction can tune the coupling strength between the neighboring cells. Electrical transport measurements and spatially resolved diffraction and nanoprobe X-ray and scanning microwave impedance spectroscopic studies suggest that graded proton distribution in the inhomogeneous medium of hydrogen-doped nickelate film enables this behavior. We further demonstrate signal integration through the coupling of various junctions.

Can a diagnosis of Leiomyosarcoma soft palate be missed in the era of commoner oral carcinomas? - Rare case report and review of literature.

Leiomyosarcomas (LMSs) of the head and neck are an extremely rare entity. Of all smooth muscle tumors, 4%-10% occur in the head and neck and only 0.06% in the oral cavity. Because of its infrequency, it has been associated with both delayed diagnosis and misdiagnosis. Here, we report the clinicopathological findings of a case of primary LMS of the soft palate in a 42-year-old male patient with an emphasis on the judicious use of ancillary diagnostic modalities to arrive at a definitive diagnosis. Intraorally, LMSs present as painless, lobulated, fixed masses of the submucosal tissues in middle-aged or older individuals. The treatment modalities and lymph nodal dissection criteria are dissimilar to more common oral carcinomas. Hence, definitive diagnosis is necessary.

Detection, quantification and degradation kinetic for five benzodiazepines using VAUS-ME-SFO/LC-MS/MS method for water, alcoholic and non-alcoholic beverages.

Benzodiazepines can make victims more docile, they are frequently used in drug-facilitated crimes, such as robberies and sexual assaults. Therefore, it is essential to develop techniques for determining whether these chemicals are present in relation with illegal activity is crucial. Therefore, to determine the presence of five benzodiazepines (alprazolam, clonazepam, diazepam, lorazepam, and oxazepam) in water, alcoholic beverages, and non-alcoholic beverages, a simple and direct, miniaturized, and effective vortex assisted ultrasound based microextraction using solidification of floating organic droplets (VAUS-ME-SFO) in combination with LC-MS/MS was developed. 1-Undecanol and acetonitrile, respectively, served as the extractant and disperser solvents. Many other parameters affect the efficiency of the developed analytical procedure VAUS-ME-SFO/LC-MS/MS. These parameters were optimized using Plackett Burman Design and Central Composite Design to obtain reliable results. The optimum conditions for the extraction were: 10.0 mL of sample; 180 µL acetonitrile, as a dispersive solvent; 200 µL of 1-undecanol, as an extraction solvent; pH 7; 105 s of vortex agitation; 120 s of ultrasonication application and 3 min of centrifugation at 7000 rpm. The benzodiazepines were separated by a chromatographic separation technique carried out by a UPLC system consisting of a binary mobile phase. The solvent system comprises of 0.1% Formic acid in Milli-Q (Solvent A) and 0.1% Formic acid in ACN (Solvent B) with a gradient flow of 3.5 min total analysis time. Under the optimized conditions, the calibration curve was studied in the range of 0.124-7.810 ng mL-1. The regression correlation coefficient (R2) value of all targeted analytes ranges from 0.993 to 0.999. The LOD and LOQ of VAUS-ME-SFO methods using LC-MS/MS analysis range from 0.316 to 0.968 ng mL-1 and 1.055-3.277 ng mL-1 respectively. The repeatability within a day varied from 0.6 to 3.5%, and the reproducibility across days varied from 2.2 to 6.3%. The recoveries ranges for water, alcoholic and non-alcoholic beverages from 70.77 to 114.53%, 63.20-102.21% and 66.23-113.28% respectively. Further, the degradation kinetics was studied to establish the half-life of each targeted analyte in the matrix undertaken in the study. The water samples were classified based on their BDZs residues. This implies that the more health care and anthropogenic activity, the more the BDZs residue will be in water samples.

Angiographic quantification of aortic regurgitation following myval octacor implantation; independent core lab adjudication.

BACKGROUND: The balloon expandable Myval transcatheter heart valve (THV) showed encouraging results regarding residual aortic regurgitation (AR) from multiple observational studies. The newly designed Myval Octacor has been introduced recently, aiming for a reduction in AR and improved performance. OBJECTIVES: The focus of this study is to report the incidence of AR using the validated quantitative Videodensitometry angiography technology (qLVOT-AR%) in the first in human use of the Myval Octacor THV system. METHODOLOGY: We report on the first in human use of the Myval Octacor THV system in 125 patients in 18 Indian centres. Independent retrospective analysis of the final aortograms following implantation of the Myval Octacor was performed using the CAAS-A-Valve software. AR is reported as a regurgitation fraction. The previously validated cutoff values have been used to identify ≥moderate AR (RF% >17%), mild (6% < RF% ≤17%), and none or trace AR (RF% ≤ 6%). RESULTS: Final aortogram was analysable for 103 patients (84.4%) among the 122 available aortograms. 64 (62%) patients, had tricuspid aortic valve (TAV), 38 (37%) with bicuspid AV (BAV), and one with unicuspid AV. The median absolute RF% was 2% [1, 6], moderate or more AR incidence was 1.9%, mild AR in 20.4%, and none or trace AR in 77.7%. The two cases with RF% >17% were in the BAV group. CONCLUSION: The initial results of Myval Octacor using quantitative angiography-derived regurgitation fraction demonstrated a favourable outcome regarding residual AR, possibly due to improved device design. Results must be confirmed in a larger randomised study, including other imaging modalities.

ß-triketone herbicide exposure cause tyrosine and fat accumulation in Caenorhabditis elegans.

ß-triketone herbicides have been efficiently employed as an alternate to atrazine. Triketones are 4-hydroxyphenylpyruvate dioxygenase (HPPD) enzyme inhibitors and exposure is reported to cause significant increase in plasma tyrosine levels. In this study, we have employed a non-target organism Caenorhabditis elegans to determine the impact of ß-triketone exposures at recommended field doses (RfD). Our results indicate sulcotrione and mesotrione, negatively influence the survival, behavior, and reproduction of the organism at RfD. Additionally, we have traced the parallels regarding the impact of triketones on the tyrosine metabolism pathway, in C. elegans to those in mammalian models, wherein the expression of the tyrosine metabolism pathway genes are altered, directly influencing tyrosine catabolism leading to significant tyrosine accumulation in exposed organism. Further, we investigated the impact of sulcotrione and mesotrione exposure on fat deposition (triglyceride levels, Oil-Red-O staining and lipidomics) and the fatty acid metabolism pathway. In the exposed worms, the expression of enlongases and fatty acid desaturases were up-regulated along with an increase in the levels of triglycerides. Thus, the data indicates a positive association of ß-triketone exposure to mis-regulation of the fatty acid metabolism pathway genes leading to fat accumulation in worms. Therefore, ß-triketone might be a potential obesogen.

Investigation of agro-forestry and construction demolition wastes in alkali-activated fly ash bricks as sustainable building materials.

Production of burnt clay bricks, cement and burning of agricultural/forestry wastes are responsible for major greenhouse gases emission. The present work investigate the effect of treated rice straw and forestry leaves in alkali-activated fly ash bricks with construction & demolition wastes for non-load bearing partitions walls at elevated temperature of 800 °C. 1-4 wt% incorporated agro-forestry wastes fly ash bricks with 10 and 20 wt% ground granulated blast slag (GGBFS) addition shows compressive strength ranging from 8 to 15 MPa. The thermal conductivity of the panels with 1-4 wt% agro-forestry addition varies from 0.4 to 0.5 W/m.K. The sound transmission class (STC) of 20 mm thick agro-forestry waste fly ash samples depict moderate sound insulation properties over the range of 24 to 37 dB. The wallette units of burnt clay bricks and agro-forestry based fly ash bricks show load carrying capacity of 360 kN, 273 kN and 195 kN, 110 kN at temperatures of 35 °C and 800 °C respectively. The present study shows a potential green solution toward sustainable building materials in construction sector leading to reduced depletion of fertile soil used in production of burnt clay bricks.

Functional genomic analysis of an efficient indole degrading bacteria strain Alcaligenes faecalis IITR89 and its biodegradation characteristics.

Indole is a nitrogenous heterocyclic aromatic pollutant often detected in various environments. An efficient indole degrading bacterium strain IITR89 was isolated from River Cauvery, India, and identified as Alcaligenes faecalis subsp. phenolicus. The bacterium was found to degrade ~ 95% of 2.5 mM (293.75 mg/L) of indole within 18 h utilizing it as a sole carbon and energy source. Based on metabolite identification, the metabolic route of indole degradation is indole → (indoxyl) → isatin → (anthranilate) → salicylic acid → (catechol) → (Acetyl-CoA) → and further entering into TCA cycle. Genome sequencing of IITR89 revealed the presence of gene cluster dmpKLMNOP, encoding multicomponent phenol hydroxylase; andAbcd gene cluster, encoding anthranilate 1,2-dioxygenase ferredoxin subunit (andAb), anthranilate 1,2-dioxygenase large subunit (andAc), and anthranilate 1,2-dioxygenase small subunit (andAd); nahG, salicylate hydroxylase; catA, catechol 1,2-dioxygenase; catB, cis, cis-muconate cycloisomerase; and catC, muconolactone D-isomerase which play an active role in indole degradation. The findings strongly support the degradation potential of strain IITR89 and its possible application for indole biodegradation.

Evaluation of heavy metal contaminants in prepared noodles: source allocation and health risk assessment.

In recent years, special attention has been given to emission research that led to the deposition of toxicants from road traffic. Thus, it is imperative to focus on heavy metal (HM) stressors in food items, their source contribution, and health risk assessment providing insight into their spatial role at the population level. In this study, heavy metal in the street vended noodles was studied while correlating the quality of noodle with different environmental origins. The samples were prepared using acid digestion and analysed by flame atomic absorption spectrophotometer, except Hg which was analysed by direct mercury analyser. The results showed that some heavy metals like Cr, Pb, Mn, Cd, and Hg exceed their permissible limits established by the international legislation for food products. In the noodle samples, the concentration of heavy metal ranged from < 0.1 to 0.904 mg/kg for Pb, < 0.09 to 0.843 mg/kg for Ni, < 0.004 to 0.201 mg/kg for Cd, < 0.0001 to 0.004 mg/kg for Hg, < 0.01 to 1.388 mg/kg for Cu, < 0.015 to 8.049 mg/kg for Mn, and < 0.02 to 16.514 mg/kg for Cr. Noodle samples vended on high traffic density streets are directly associated with increased HM content due to atmospheric deposition from the surrounding. Source apportionment study determines that HM contamination belongs to the same source of origin, except Cr. Based on the cluster analysis, these samples fall into three major groups that were further validated by the canonical discriminant function. Health risk prediction by Monte Carlo simulation revealed an elevated non-carcinogenic health hazard risk to consumers with a hazard index (HI) shift from 71 to 75%. Health hazard analysis showed that consumers of high traffic density street vended food are at higher risk of developing health-related issues. This study is important to evaluate the health risk of the population exposed to heavy metals due to ingestion of street vended food.

Understanding the mode of inhibition and molecular interaction of taxifolin with human adenosine deaminase.

Adenosine deaminase is a zinc+2 dependent key enzyme of purine metabolism which irreversibly converts adenosine to inosine and form ammonia. Overexpression of adenosine deaminase has been linked to a variety of pathophysiological conditions such as atherosclerosis, hypertension, and diabetes. In the case of a cell-mediated immune response, ADA is thought to be a marker, particularly in type II diabetes. Deoxycoformycin is the most potent ADA inhibitor that has been discovered so far, but it has several drawbacks, including being toxic and having poor pharmacokinetics. Taxifolin, a flavonoid derived from plants, was discovered to be a potent inhibitor of the human ADA (hADA) enzyme in the current study. Taxifolin bound at the active site of human ADA and showed fifty percent inhibition at a concentration of 400 µM against the enzyme. To better understand the interactions between taxifolin and human ADA, docking and molecular dynamic simulations were performed. In-silico studies using autodock revealed that taxifolin bound in the active site of human ADA with a binding energy of -7.4 kcal mol -1 and a theoretical Ki of 3.7 uM. Comparative analysis indicated that taxifolin and deoxycoformycin share a common binding space in the active site of human ADA and inhibit its catalytic activity similarly. The work emphasises the need of employing taxifolin as a lead chemical in order to produce a more precise and effective inhibitor of the human ADA enzyme with therapeutic potential.Communicated by Ramaswamy H. Sarma.

Synthesis of Biomass-Derived Activated Carbons and Their Immobilization on Alginate Gels for the Simultaneous Removal of Cr(VI), Cd(II), Pb(II), As(III), and Hg(II) from Water.

Low-cost alginate gels of activated carbons were prepared, which were derived from the peels of banana and sweet lime. The synthesized carbon was activated and immobilized on alginate, producing its gel. These gels were categorized according to their methods of drying, in which air drying, freeze drying, and supercritical drying led to the formation of xerogels, cryogels, and aerogels, respectively. The gels were used for adsorption of heavy metals from their aqueous solution. The heavy metals that were targeted for removal were Pb(II), Cd(II), Cr(VI), As(III), and Hg(II). Among all the adsorbents, the alginate cryogel of sweet lime-derived activated carbon (SLACC) showed the highest removal percentage of heavy metals, and thus, it was used for batch study. The adsorption of heavy metals by SLACC was checked at different times, pH values, adsorbent doses, temperatures, and adsorbate concentrations. The study revealed that the pseudo-second-order model best described the kinetic study, while the adsorption followed the Freundlich isotherm. SLACC showed maximum adsorption capacities (q cal) of 3.71, 4.22, 20.04, 7.31, and 4.37 mg/g for Cr, Cd, Pb, As, and Hg, respectively, when 20 mg of SLACC was used for the removal of 4 ppm concentration of the targeted heavy metals from their 20 mL solution. Based on the thermodynamic study, it was found that the adsorption was spontaneous and exothermic. Furthermore, the adsorbent was also used on real water samples and showed up to 90% removal efficiency for these targeted heavy metals. SLACC was regenerated with 0.1 M ethylenediaminetetraacetic acid (EDTA) solution and reused for five cycles, in which the percentage removal of heavy metals was more than 50% till the fourth cycle. Furthermore, the leaching study showed that no toxic elements had leached from SLACC into water, making it a safe adsorbent.

Targeted Anterior Cervical Epidural Blood Patch in a Patient with Spontaneous Intracranial Hypotension.

A 45-year-old male was admitted with severe orthostatic headache secondary to spontaneous intracranial hypotension. He had the site of cerebrospinal fluid (CSF) leakage identified at the anterolateral aspect of the C7-T1 spinal level. He first underwent a conventional posterior-approach cervical epidural blood patch (EBP) which provided immediate relief to the patient's symptoms; however, his symptoms recurred two days later. To better target the anterolateral leakage site, we employed an anterior-approach EBP under computed tomography (CT) guidance. After this attempt, the patient experienced complete relief of his symptoms, and the headache eventually resolved.

Single and combined effect of bisphenol A with high sucrose diet on the diabetic and renal tubular dysfunction phenotypes in Drosophila melanogaster.

In the present study, effect of exposure of bisphenol A (BPA) and combined exposure of BPA + HSD has been investigated on the glucose homeostasis and associated renal complications in Drosophila. Exposure of 1.0 mM BPA alone induced type 2 diabetes like condition (T2D) in adult male D. melanogaster via oxidative stress. Elevated TGF-ß signaling was evident by increased expression of baboon (babo) in BPA exposed organism that stimulated the modulation of extracellular matrix (ECM) component collagen IV resulting in the fibrosis of the Malpighian tubules (MTs). Combined exposure of BPA + HSD (high sucrose diet) resulted in the increased magnitude of T2D and MTs dysfunction parameters. Taken together, the study illustrates that BPA has diabetogenic potential in exposed Drosophila that caused adverse effects on their MTs and combined exposure with BPA and HSD could aggravate the renal tubular dysfunction. The study further suggests the use of Drosophila model to study the environmental chemicals induced diabetes mediated renal dysfunction.

Expression, Purification, and In Silico Characterization of Mycobacterium smegmatis Alternative Sigma Factor SigB.

Sigma factor B (SigB), an alternative sigma factor (ASF), is very similar to primary sigma factor SigA (σ 70) but dispensable for growth in both Mycobacterium smegmatis (Msmeg) and Mycobacterium tuberculosis (Mtb). It is involved in general stress responses including heat, oxidative, surface, starvation stress, and macrophage infections. Despite having an extremely short half-life, SigB tends to operate downstream of at least three stress-responsive extra cytoplasmic function (ECF) sigma factors (SigH, SigE, SigL) and SigF involved in multiple signaling pathways. There is very little information available regarding the regulation of SigB sigma factor and its interacting protein partners. Hence, we cloned the SigB gene into pET28a vector and optimized its expression in three different strains of E. coli, viz., (BL21 (DE3), C41 (DE3), and CodonPlus (DE3)). We also optimized several other parameters for the expression of recombinant SigB including IPTG concentration, temperature, and time duration. We achieved the maximum expression of SigB at 25°C in the soluble fraction of the cell which was purified by affinity chromatography using Ni-NTA and further confirmed by Western blotting. Further, structural characterization demonstrates the instability of SigB in comparison to SigA that is carried out using homology modeling and structure function relationship. We have done protein-protein docking of RNA polymerase (RNAP) of Msmeg and SigB. This effort provides a platform for pulldown assay, structural, and other studies with the recombinant protein to deduce the SigB interacting proteins, which might pave the way to study its signaling networks along with its regulation.