Temperature-dependent crystal structure investigation of 4f hybridized thermoelectric clathrate Ba8-xCexAuySi46-y.

Thermoelectric materials allow for conversion of waste heat into electrical energy, and they represent a green solution for improving our energy efficiency. Inclusion of 4f electrons near the Fermi level may boost the Seebeck coefficient, which is essential for high thermoelectric performance. In this study, Ce was successfully substituted for Ba on the guest atom sites in the type-I clathrate Ba8-xCexAuySi46-y and the material was characterized using high-resolution synchrotron powder X-ray diffraction data measured from 100 K to 1000 K to investigate potential structural implications of the inclusion of a 4f element. The thermal expansion and bonding of the host structure are not affected by the presence of Ce, as seen from the linear coefficient of unit-cell thermal expansion of 7.30 (8) × 10-6 K-1 and the average host Debye temperature of 404 (7) K determined from the multi-temperature atomic displacement parameters, both of which are similar to values obtained for pure Ba8AuySi46-y. The anisotropic atomic displacement parameters on the guest atom site in the large clathrate cage populated by Ba surprisingly reveals isotropic behavior, which is different from all other clathrates reported in literature, and thus represents a unique host-guest bonding situation.

Mechanochemical Synthesis and Structure of Lithium Tetrahaloaluminates, LiAlX4 (X = Cl, Br, I): A Family of Li-Ion Conducting Ternary Halides.

State-of-the-art oxides and sulfides with high Li-ion conductivity and good electrochemical stability are among the most promising candidates for solid-state electrolytes in secondary batteries. Yet emerging halides offer promising alternatives because of their intrinsic low Li+ migration energy barriers, high electrochemical oxidative stability, and beneficial mechanical properties. Mechanochemical synthesis has enabled the characterization of LiAlX4 compounds to be extended and the iodide, LiAlI4, to be synthesized for the first time (monoclinic P21/c, Z = 4; a = 8.0846(1) Å; b = 7.4369(1) Å; c = 14.8890(2) Å; ß = 93.0457(8)°). Of the tetrahaloaluminates, LiAlBr4 exhibited the highest ionic conductivity at room temperature (0.033 mS cm-1), while LiAlCl4 showed a conductivity of 0.17 mS cm-1 at 333 K, coupled with the highest thermal and oxidative stability. Modeling of the diffusion pathways suggests that the Li-ion transport mechanism in each tetrahaloaluminate is closely related and mediated by both halide polarizability and concerted complex anion motions.

Is RuAs2 a candidate for high temperature thermoelectric applications?

The mineral inspired material RuAs2 shows promise as a thermoelectric material with its high stability and attractive band structure. In order to validate these expectations phase-pure polycrystalline ruthenium arsenide was synthesized and densified using Spark Plasma Sintering. RuAs2 is an n-type semiconductor with an indirect band gap 0.69 eV as estimated from temperature dependent resistivity data, while the band gap calculated with DFT is 0.64 eV. The thermal conductivity and electrical resistivity are both high with room temperature values of 16 W m-1 K-1 and 170 mΩ cm respectively, leading to modest thermoelectric properties for the intrinsic system. Band structure calculations suggest that chemical modification should preferably be done at the As site to improve the intrinsic properties. Synchrotron powder X-ray diffraction and Rietveld structural refinements show RuAs2 to be a stable line phase up to 1000 K in both in air and in vacuum, and both as a powder and as a dense pellet. No indication of preferential orientation or material gradients are observed.

Revealing the slow decomposition kinetics of type-I clathrate Ba8Ga16Ge30.

Inconsistencies in high temperature thermoelectric property measurements of Ba8Ga16Ge30 have prompted our study on the thermal stability of this heavily studied inorganic clathrate. Using X-ray diffraction, thermal analysis, and imaging techniques on both powder and spark plasma sintered pelletized samples, we probe the structure and decomposition characteristics of this important high temperature thermoelectric material. We demonstrate that the decomposition of Ba8Ga16Ge30 is extremely dependent on the heating conditions employed and, as a result of the slow decomposition kinetics of the clathrate, reveal that the true stability of this system has been overlooked in the extensive literature available. Loss of Ga and Ge from the clathrate cage is evident in all high temperature experiments under both air and inert environments. This study serves to highlight that the underlying structural chemistry and stability of thermoelectric materials at high temperature needs to be considered in parallel with the thermoelectric properties which constitute the figure of merit. Only then will reliable thermoelectric modules for real applications be realized.

Facile Uptake and Release of Ammonia by Nickel Halide Ammines.

Although major difficulties are experienced for hydrogen- storage materials to meet performance requirements for mobile applications, alternative fuel cell feedstocks such as ammonia can be stored in the solid state safely at high capacity. We herein describe the NiX2 -NH3 (X=Cl, Br, I) systems and demonstrate their exceptional suitability for NH3 storage (up to 43 wt % NH3 with desorption that begins at 400 K). The structural effects that result from the uptake of NH3 were studied by powder X-ray diffraction (PXD), FTIR spectroscopy and SEM. NH3 release at elevated temperatures was followed by in situ PXD. The cycling capabilities and air stability of the systems were also explored. NH3 is released from the hexaammines in a three-step process to yield the diammine, monoammine and NiX2 dihalides respectively and (re)ammoniation occurs readily at room temperature. The hexaammines do not react with air after several hours of exposure.

The chemistry of ZnWO4 nanoparticle formation.

The need for a change away from classical nucleation and growth models for the description of nanoparticle formation is highlighted. By the use of in situ total X-ray scattering experiments the transformation of an aqueous polyoxometalate precursor mixture to crystalline ZnWO4 nanoparticles under hydrothermal conditions was followed. The precursor solution is shown to consist of specific Tourné-type sandwich complexes. The formation of pristine ZnWO4 within seconds is understood on the basis of local restructuring and three-dimensional reordering preceding the emergence of long range order in ZnWO4 nanoparticles. An observed temperature dependent trend in defect concentration can be rationalized based on the proposed formation mechanism. Following nucleation the individual crystallites were found to grow into prolate morphology with elongation along the unit cell c-direction. Extensive electron microscopy characterization provided evidence for particle growth by oriented attachment; a notion supported by sudden particle size increases observed in the in situ total scattering experiments. A simple continuous hydrothermal flow method was devised to synthesize highly crystalline monoclinic zinc tungstate (ZnWO4) nanoparticles in large scale in less than one minute. The present results highlight the profound influence of structural similarities in local structure between reactants and final materials in determining the specific nucleation of nanostructures and thus explains the potential success of a given synthesis procedure in producing nanocrystals. It demonstrates the need for abolishing outdated nucleation models, which ignore subtle yet highly important system dependent differences in the chemistry of the forming nanocrystals.