RESUMO
Stress corrosion cracking (SCC) of laser powder bed fusion-fabricated 316L was studied under the variation in energy input density to emulate the existence of distinctive types of defects. Various electrochemical polarization measurements were performed in as-received polished and ground states, to elucidate the effect of defect type on corrosion and SCC behaviour in marine solution. The results revealed severe localized corrosion attack and SCC initiation for specimens with a lack of fusion pores (LOF). Moreover, the morphology of SCC was different, highlighting a more dominant effect of selective dissolution of the subgrain matrix for gas porosities and a more pronounced effect of brittle fracture at laser track boundaries for the specimens with LOF pores.
RESUMO
Ti6Al4V components, for biomedical and aerospace sectors, are receiving a great interest especially after the advent of additive manufacturing technologies. The most used techniques are Selective Laser Sintering (SLS), Selective Laser Melting (SLM) and Electron Beam Melting (EBM). In the current research, we developed 3D-printed Ti6Al4V scaffolds by Direct Ink Writing (DIW) technology. Appropriate ink formulations, based on water-titanium powder suspensions, were achieved by controlling the rheological properties of the developed inks. After printing process, and drying, the printed components were sintered at 1400⯰C under high vacuum for 3â¯h. Highly porous titanium scaffolds (with porosity up to 65â¯vol%) were produced and different geometries were printed. The influence of the porosity on the morphology, compression strength and biocompatibility of the scaffolds was investigated.
