A novel and efficient one-pot strategy for the synthesis of 1,2,4-triazoles: access to synthesis of penipanoid A and its analogues.

We developed a novel one-pot strategy for synthesizing biologically important 1,2,4-triazole motifs from easily accessible 4-hydroxy phenylacetic acid, formamidine hydrochloride and hydrazine derivatives under mild conditions. This strategy enabled us to synthesize the natural penipanoid A and its analogues in one step.

Removal of mercury by foam fractionation using surfactin, a biosurfactant.

The separation of mercury ions from artificially contaminated water by the foam fractionation process using a biosurfactant (surfactin) and chemical surfactants (SDS and Tween-80) was investigated in this study. Parameters such as surfactant and mercury concentration, pH, foam volume, and digestion time were varied and their effects on the efficiency of mercury removal were investigated. The recovery efficiency of mercury ions was highly sensitive to the concentration of the surfactant. The highest mercury ion recovery by surfactin was obtained using a surfactin concentration of 10 × CMC, while recovery using SDS required < 10 × CMC and Tween-80 >10 × CMC. However, the enrichment of mercury ions in the foam was superior with surfactin, the mercury enrichment value corresponding to the highest metal recovery (10.4%) by surfactin being 1.53. Dilute solutions (2-mg L(-1) Hg(2+)) resulted in better separation (36.4%), while concentrated solutions (100 mg L(-1)) enabled only a 2.3% recovery using surfactin. An increase in the digestion time of the metal solution with surfactin yielded better separation as compared with a freshly-prepared solution, and an increase in the airflow rate increased bubble production, resulting in higher metal recovery but low enrichment. Basic solutions yielded higher mercury separation as compared with acidic solutions due to the precipitation of surfactin under acidic conditions.

Synthesis of brushite particles in reverse microemulsions of the biosurfactant surfactin.

In this study the "green chemistry" use of the biosurfactant surfactin for the synthesis of calcium phosphate using the reverse microemulsion technique was demonstrated. Calcium phosphates are bioactive materials that are a major constituent of human teeth and bone tissue. A reverse microemulsion technique with surfactin was used to produce nanocrystalline brushite particles. Structural diversity (analyzed by SEM and TEM) resulted from different water to surfactin ratios (W/S; 250, 500, 1000 and 40,000). The particle sizes were found to be in the 16-200 nm range. Morphological variety was observed in the as-synthesized microemulsions, which consisted of nanospheres (~16 nm in diameter) and needle-like (8-14 nm in diameter and 80-100 nm in length) noncalcinated particles. However, the calcinated products included nanospheres (50-200 nm in diameter), oval (~300 nm in diameter) and nanorod (200-400 nm in length) particles. FTIR and XRD analysis confirmed the formation of brushite nanoparticles in the as-synthesized products, while calcium pyrophosphate was produced after calcination. These results indicate that the reverse microemulsion technique using surfactin is a green process suitable for the synthesis of nanoparticles.

Low-temperature synthesis of rose-like ZnO nanostructures using surfactin and their photocatalytic activity.

Rose-like ZnO nanostructures were synthesized by the precipitation method using a biosurfactant (surfactin) as a templating-agent stabilizer. The concentration of surfactin in the precursor solution significantly influenced the thickness and density of the petals in the rose-like structures, and all samples were of a wurtzite phase. The thickness of the petal was found to decrease with increasing surfactin concentration. The average thickness of the petals was found to be between 10 and 13 nm. Photocatalytic degradation of methylene blue using rose-like ZnO nanostuctures was investigated, and the morphology, density and thickness of the ZnO petals were found to influence the photodegradation activity. The samples with loosely-spread petals, or plate-like ZnO structures, brought about the strongest photodegradation in comparison with the dense rose-like structures. The greater activity of the loose-petal structures was correlated with their higher absorption in the UV region in comparison with the other samples. The ZnO samples prepared using low surfactin concentrations had higher rate constant values, i.e., 9.1 x 10(-3) min(-1), which revealed that the photodegradation of methylene blue under UV irradiation progressed by a pseudo first-order kinetic reaction.

Ultrathin titania coating for high-temperature stable SiO2/Pt nanocatalysts.

The facile synthesis of silica supported platinum nanoparticles with ultrathin titania coating to enhance metal-support interactions suitable for high temperature reactions is reported, as thermal and structure stability of metal nanoparticles is important for catalytic reactions.

Biological synthesis of gold and silver nanoparticles mediated by the bacteria Bacillus subtilis.

Biological synthesis of gold and silver nanoparticles was carried out using the bacteria Bacillus subtilis. The reduction processes of chloroaurate and silver ions by B. subtilis were found to be different. Gold nanoparticles were synthesized both intra- and extracellularly, while silver nanoparticles were exclusively formed extracellularly. The gold nanoparticles were formed after 1 day of addition of chloroaurate ions, while the silver nanoparticles were formed after 7 days. The nanoparticles were characterized by X-ray diffraction, UV-vis spectra and transmission electron spectroscopy. X-ray diffraction revealed the formation of face-centered cubic (fcc) crystalline gold nanoparticles in the supernatant, broth solution and bacterial pellet. Silver nanoparticles also exhibited diffraction peaks corresponding to fcc metallic silver. UV-vis spectra showed surface plasmon vibrations for gold and silver nanoparticles centered at 530 and 456 nm, respectively. TEM micrographs depicted the formation of gold nanoparticles intra- and extracellularly, which had an average size of 7.6 +/- 1.8 and 7.3 +/- 2.3 nm, respectively, while silver nanoparticles were exclusively formed extracellularly, with an average size of 6.1 +/- 1.6 nm. The bacterial proteins were analyzed by sodium dodecyl sulfonate-polyacrylamide electrophoresis (SDS-PAGE) before and after the addition of metal ion solutions. We believe that proteins of a molecular weight between 25 and 66 kDa could be responsible for chloroaurate ions reduction, while the formation of silver nanoparticles can be attributed to proteins of a molecular weight between 66 and 116 kDa. We also believe that the nanoparticles were stabilized by the surface-active molecules i.e., surfactin or other biomolecules released into the solution by B. subtilis.

Synthesis of gold nanoparticles via an environmentally benign route using a biosurfactant.

Anionic biosurfactant surfactin-mediated gold nanoparticles were synthesized for the first time in this study. Differing proton concentrations is believed to cause structural changes in the lipopeptide surfactin used to stabilize the gold nanoparticles in aqueous solution, the effects of which on the morphology of the nanoparticles were investigated. Synthesis of gold nanoparticles by borohydrate reduction was performed at three pH levels (pH 5, 7 and 9) and two different temperatures, and the nanoparticles were characterized by UV-visible spectroscopy, X-ray diffraction and transmission electron microscopy. The UV-vis spectra showed a blue shift with increasing pH from 5 to 9 (from 528 to 566 nm) at both 4 degrees C and room temperature. The nanoparticles synthesized at pH 7 and 9 remained stable for 2 months, while aggregates were observed at pH 5 within 24 h. TEM micrographs revealed that the mean particle size was about 13.11, 8.16 and 4.70 nm at pH 5, 9 and 7, respectively, at 4 degrees C. The nanoparticles formed at pH 7 were uniform in shape and size, and polydispersed and anisotropic at pH 5 and 9. The nanoparticles synthesized at room temperature were monodispersed and were more uniform as compared with those formed at 4 degrees C. This report describes the use of a renewable and environmentally green and biodegradable surfactant as a template and stabilizing agent in the synthesis of gold nanoparticles.