Production and characterization of graphene oxide-engineered biochars and application for organic micro-pollutant adsorption from aqueous solutions.

In this study, conventional and Graphene Oxide-engineered biochars were produced and thoroughly characterized, in order to investigate their potential as adsorptive materials. Two types of biomass, Rice Husks (RH) and Sewage Sludge (SS), two Graphene Oxide (GO) doses, 0.1% and 1%, and two pyrolysis temperatures, 400 °C and 600 °C were investigated. The produced biochars were characterized in physicochemical terms and the effect of biomass, GO functionalization and pyrolysis temperature on biochar properties was studied. The produced samples were then applied as adsorbents for the removal of six organic micro-pollutants from water and treated secondary wastewater. Results showed that the main factors affecting biochar structure was biomass type and pyrolysis temperature, while GO functionalization caused significant changes on biochar surface by increasing the available C- and O- based functional groups. Biochars produced at 600 °C showed higher C content and Specific Surface Area, presenting more stable graphitic structure, compared to biochars produced at 400 °C. Micro-pollutant adsorption rates were in the range of 39.9%-98.3% and 9.4%-97.5% in table water and 28.3%-97.5% and 0.0%-97.5% in treated municipal wastewater, for the Rice Husk and Sewage Sludge biochars respectively. The best biochars, in terms of structural properties and adsorption efficiency were the GO-functionalized biochars, produced from Rice Husks at 600 °C, while the most difficult pollutant to remove was 2.4-Dichlorophenol.

Adsorption of selected organic micro-pollutants on sewage sludge biochar.

In this study, biochar was produced from three differently treated sewage sludge biomasses, in three pyrolytic temperatures, 300 °C, 500 °C and 700 °C, under continuous N2 supply. The produced samples were physicochemically characterized and their initial metal concentration, along with metal leaching potential, were investigated. Moreover, the application of the biochar samples as adsorbents for the removal of seven emerging organic micro-pollutants from table water and treated wastewater matrices was investigated. The results showed that even though the biochar samples were not especially enriched in terms of physicochemical characterization, they were effective as adsorptive materials in the respective experiments. Pollutant removal was in the range of 67-99% for the table water experiments, while the removal for the wastewater experiments was 35-97%. The results of this study indicate that sewage sludge biochar has the potential to be an effective, low-cost adsorbent, providing, at the same time, a viable and environmentally friendly solution concerning the difficult task of sludge management.