Spatial characteristics of Kalpha x-ray emission from relativistic femtosecond laser plasmas.

The spatial structure of the Kalpha emission from Ti targets irradiated with a high intensity femtosecond laser has been studied using a two-dimensional monochromatic imaging technique. For laser intensities I<5 x 10(17) W/cm(2), the observed spatial structure of the Kalpha emission can be explained by the scattering of the hot electrons inside the solid with the help of a hybrid particle-in-cell/Monte Carlo model. By contrast, at the maximum laser intensity I=7 x 10(18) W/cm(2) the half-width of the Kalpha emission was 70 microm compared to a laser-focus half-width of 3 microm. Moreover, the main Kalpha peak was surrounded by a halo of weak Kalpha emission with a diameter of 400 microm and the Kalpha intensity at the source center did not increase with increasing laser intensity. These three features point to the existence of strong self-induced fields, which redirect the hot electrons over the target surface.

Optimization of Kalpha bursts for photon energies between 1.7 and 7 keV produced by femtosecond-laser-produced plasmas of different scale length.

The conversion efficiency of a 90 fs high-power laser pulse focused onto a solid target into x-ray Kalpha line emission was measured. By using three different elements as target material (Si, Ti, and Co), interesting candidates for fast x-ray diffraction applications were selected. The Kalpha output was measured with toroidally bent crystal monochromators combined with a GaAsP Schottky diode. Optimization was performed for different laser intensities as well as for different density scale lengths of a preformed plasma. These different scale lengths were realized by prepulses of different intensities and delay times with respect to the main pulse. Whereas the Kalpha yield varied by a factor of 1.8 for different laser intensities, the variation of the density scale length could provide a gain factor up to 4.6 for the Kalpha output.

Theory of K(alpha) generation by femtosecond laser-produced hot electrons in thin foils.

An analytical model of femtosecond K(alpha) x-ray generation from laser-irradiated foils is presented. Expressions are found for the photon emission yield in both forward and backward directions in integral form as a function of hot-electron temperature and target thickness. It is found that for any given target material, there is a foil thickness and a hot-electron temperature at which the K(alpha) emission is maximized. Conversion efficiencies are consistent with contemporary measurements of K(alpha) radiation produced with femtosecond lasers.

Femtosecond silicon K alpha pulses from laser-produced plasmas.

Ultrashort bursts of silicon K alpha x-ray radiation from femtosecond-laser-produced plasmas have been generated. A cross-correlation measurement employing a laser-triggered ultrafast structural change of a CdTe crystal layer (320 nm) shows a K alpha pulse duration between 200 fs and 640 fs. This result is corroborated by particle in cell simulations combined with a Monte-Carlo electron stopping code and calculations on the structural changes of the crystal lattice.