Evaluation of Aerosol Electrospray Analysis of Metal-on-Metal Wear Particles from Simulated Total Joint Replacement.

Wear is a common cause for aseptic loosening in artificial joints. The purpose of this study was to develop an automated diagnostical method for identification of the number and size distribution of wear debris. For this purpose, metal debris samples were extracted from a hip simulator and then analyzed by the electrospray method combined with a differential mobility analyzer, allowing particle detection ranging from several nanometers up to 1 µm. Wear particles were identified with a characteristic peak at 15 nm. The electrospray setup was successfully used and validated for the first time to characterize wear debris from simulated total joint replacement. The advantages of this diagnostic method are its time- and financial efficiency and its suitability for testing of different materials.

The effect of carrier gas contaminants on the charging probability of aerosols under bipolar charging conditions.

This work concentrates on the experimental determination of the properties of ionic molecular clusters that are produced in the bipolar ionic atmosphere of a radioactivity based (241)Am charger. The main scope of this study was to investigate the dependency of the ions' properties on carrier gas contaminants caused by the evaporation of trace gases from different kinds of frequently encountered tubing materials. A recently developed high resolution mobility spectrometer allows the precise determination of the ions' electrical mobility; an empirical mass-mobility relationship was used to approximate the corresponding ion masses. It was found that impurities in the carrier gas dramatically change the pattern of the ion mobility/size distribution, resulting in very different ion properties that strongly depend on the carrier gas composition. Since the ion properties control the charging process of aerosols, it was further investigated how the different ion properties affect the calculation of the charging probabilities of aerosols. The results show that despite large variations of the ions' properties, only a minor effect on the calculated charging probabilities can be found.

Quantitative characterization of critical nanoclusters nucleated on large single molecules.

First order phase transitions involve nucleation, formation of nanoscale regions of a new phase within a metastable parent phase. Using the heterogeneous nucleation theorem we show how clusters formed by nucleation on single molecules evolve from the gas phase and determine the critical size beyond which condensation starts to form aerosol particles. Our experiments reveal the activation of molecules into droplets to happen via formation of critical clusters substantially larger than the seed molecule. The nanosized critical clusters were found to be well predicted by the Kelvin-Thomson relation pointing directly to the key step in the phase transition.

Heterogeneous nucleation experiments bridging the scale from molecular ion clusters to nanoparticles.

Generation, investigation, and manipulation of nanostructured materials are of fundamental and practical importance for several disciplines, including materials science and medicine. Recently, atmospheric new particle formation in the nanometer-size range has been found to be a global phenomenon. Still, its detailed mechanisms are mostly unknown, largely depending on the incapability to generate and measure nanoparticles in a controlled way. In our experiments, an organic vapor (n-propanol) condenses on molecular ions, as well as on charged and uncharged inorganic nanoparticles, via initial activation by heterogeneous nucleation. We found a smooth transition in activation behavior as a function of size and activation to occur well before the onset of homogeneous nucleation. Furthermore, nucleation enhancement for charged particles and a substantial negative sign preference were quantitatively detected.

Comparison between an unipolar corona charger and a polonium-based bipolar neutralizer for the analysis of nanosized particles and biopolymers.

In this work we present results on the charging efficiency of nanoparticles by means of a corona based unipolar charging unit. This device was designed to replace a Po210 bipolar charger unit in a commercial electrospray aerosol generator (TSI Mod 3480). The charging efficiency has been investigated for negative and positive charged particles of various chemical composition in the size range between 5 and 18 nm. The corona current has been found to be the most influential operation parameter on the charging efficiency. With a positive electrospray droplet charge and a negatively-biased corona needle, a rapidly decreasing yield of singly positively charged aerosol particles with increasing corona current was found. An increasing yield of negatively charged particles was observed with increasing current of the corona process. Providing appropriate corona settings nanoparticles with charge levels similar to these obtained with a Po210 charger were found. At optimal corona settings the yield of singly charged particles was found to be two to four times higher for negative and positive particles compared to bipolar charging. This gain in the charging efficiency increases directly the sensitivity of analysis and enhances all measurement and manipulation processes of airborne nanoparticles for which electrical charging is required.