Human health risk assessment based on direct and indirect exposure to endocrine disrupting herbicides in drinking, ground, and surface water in Croatia.

The recognition of certain herbicides as endocrine disrupting compounds has raised concerns due to their ability to interfere with the normal functioning of the endocrine system, which regulates various physiological processes in organisms. The objective of this study was to assess the possible human health risks associated with terbuthylazine and endocrine-disrupting herbicides atrazine, acetochlor, and metolachlor in the drinking, surface, and groundwater of the Zagreb city region, Croatia. We relied on advanced statistical methods and principal component analysis (PCA), which revealed higher levels of atrazine and acetochlor in drinking and groundwater samples and higher presence of metolachlor and terbuthylazine in surface waters. To evaluate the danger to human health, various exposure scenarios have been assessed. The risk of direct human exposure to analyzed herbicides through drinking or bathing with drinking (tap) or groundwater, as well as from recreational activities like swimming in rivers, streams, and lakes, has been quantified. In addition to these direct exposure scenarios, indirect ones based on consumer goods, fruits, and vegetables, treated with surface and groundwater for irrigation, were assessed to investigate the danger to human health. Judging by the reported herbicide levels there was no significant risk of carcinogenic (CR ≤ 1 × 10-6) or non-carcinogenic (HI < 1) diseases, not even when we assessed the so-called "cocktail effect" of combined the herbicide exposure in different waters.

In Silico Guided Design of Metal/Semiconductor Photocatalysts: A Case of Cu-Modified TiO2 for Ciprofloxacin Degradation.

(1) Background: An increasing use of pharmaceutics imposes a need for the permanent development of efficient strategies, including the tailoring of highly specific new materials for their removal from the environment. Photocatalytic degradation has been the subject of increasing interest of the researchers in the field. (2) Methods: This paper is focused on the investigation of the possibility to deposit a thin metal layer on a TiO2 surface and study its photocatalytic performance for the degradation of ciprofloxacin using a combination of theoretical and experimental methods. (3) Results: Based on the extensive DFT screening of 24 d-metals' adhesion on TiO2, Cu was selected for further work, due to the satisfactory expected stability and good availability. The (Cu)TiO2 was successfully synthesized and characterized with XRD, SEM+EDS and UV-Vis spectrophotometry. The uniformly distributed copper on the TiO2 surface corresponds to the binding on high-affinity oxygen-rich sites, as proposed with DFT calculations. The photocatalytic degradation rate of ciprofloxacin was improved by about a factor of 1.5 compared to the bare non-modified TiO2. (4) Conclusions: The observed result was ascribed to the ability of adsorbed Cu to impede the agglomeration of TiO2 and increase the active catalytic area, and bandgap narrowing predicted with DFT calculations.

Persistent organic pollutants in Croatian breast milk: An overview of pollutant levels and infant health risk assessment from 1976 to the present.

This review article summarizes our research of persistent organic pollutants (POPs) in human milk from Croatian mothers over the last few decades. Our studies make up the bulk of all POPs research in human milk in Croatia and show a state-of-the art in the research area. The first investigations were made in 1970's. Aim of our review article is to document the comprehensive results over several decades as the best tool to: 1.) contribute to understanding of POPs and their potential health risks, 2.) evaluate effectiveness of legislative bans and restrictions on human exposure to POPs in Croatia, and 3.) to suggest further actions. In our review we discuss: 1.) Human milk between 2011 and 2014 - evaluation of interrelations of organochlorine pesticides (OCP) and polychlorinated biphenyls (PCB) in human milk and their association with the mother's age and parity using artificial intelligence methods; and our yet unpublished research data on health risks for infants assessed through daily PCB and OCP intake. 2.) Time trends of PCB and OCP in human milk between 1976 and 2014. 3.) polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofuran (PCDD/F) in human milk in 2000., and yet unpublished data on PCDD/F and polybrominated diphenyl ethers (PBDE) in 2014.

Non-destructive techniques for the determination of magnetic particle and element contents in grapevine leaves and soil as an eco-sustainable tool for environmental pollution assessment in the agricultural areas.

The concentration of magnetic particulate matter (PM) on the leaf surface (an indicator of current pollution) and topsoil (an indicator of magnetic PMs which have geogenic natural signal or historical pollution origin) was assessed in agricultural areas (conventional and organic vineyards). The main aim of this study was to explore whether magnetic parameters such as saturation isothermal remanent magnetization (SIRM) and mass-specific magnetic susceptibility (χ) can be a proxy for magnetic particulate matter (PM) pollution and associated potentially toxic elements (PTEs) in agricultural areas. Besides, wavelength dispersive X-ray fluorescence spectroscopy (WD-XRF) was investigated as a screening method for total PTE content in soil and leaf samples. Both magnetic parameters (SIRM and χ) pinpoint soil pollution, while SIRM was more suitable for evaluating magnetic PM accumulated on leaves. The values of both magnetic parameters were significantly (p < 0.01) correlated within the same type of sample (soil-soil or leaf-leaf), but not between different matrixes (soil-leaf). Differences between magnetic particles' grain sizes among vegetation seasons in vineyards were obtained by observing the SIRM/χ ratio. WD-XRF was revealed to be an appropriate screening method for soil and leaf total element contents in agricultural ambient. For a more precise application of WD-XRF leaf measurements, specific calibration using a similar matrix to plant material is required. In parallel, measurements of SIRM, χ, and element content (by WD-XRF) can be recommended as user-friendly, fast, and eco-sustainable techniques for determining magnetic PM and PTE pollution hotspots in agricultural ambient.

Health risk assessment of heavy metals in soil, plant, and water samples near "Gacko" power plant, in Bosnia and Herzegovina.

This study assesses heavy metal content in soil, water, and plant material from sites located around the lignite mine and the power plant "Gacko", Bosnia and Herzegovina. The samples were collected, prepared, and analyzed for heavy metals content using the flame atomic absorption spectrophotometer. Samples were analyzed for cadmium, lead, copper, zinc, manganese, and iron. To identify the relationship among the metals in samples and their possible sources, Pearson's correlation and principal component analysis were performed. Health risk assessment was applied to establish potential health risks posed to humans caused by contaminants in different environmental compartments. The results of our analyses show that most soil samples contain copper, and one of those samples had a copper concentration of more than 70 µg/g, which is a critical upper value for agricultural use. In the soil samples that were analyzed, cadmium was also detected, and its concentration was greater than 2 µg/g. Lead, on the other hand, had a concentration that was higher than the maximum permissible for unpolluted soils in 40% of the soil samples that were analyzed. Lead and cadmium concentrations in surface waters mostly contribute to a non-carcinogenic risk in the scenario of recreational swimming exposure. The presence of Cd, a highly toxic element in water, may be explained by the leaching of artificial fertilizers used in the study area, whereas Pb's origin may be geological. The results of this study recommend routine heavy metal monitoring in samples of soil, water, and plants from the examined area so that, if metal concentrations continue increasing, remedial action should be advised to prevent accumulation in the food chain.

Mercury in scarletina bolete mushroom (Neoboletus luridiformis): Intake, spatial distribution in the fruiting body, accumulation ability and health risk assessment.

In the present work, we focused on two aspects of mercury (Hg) bioconcentration in the above-ground parts of Neoboletus luridiformis. In the first part, we monitored the bioconcentration potential of individual anatomical parts of a particular fruiting body and evaluated the obtained data by the spline interpolation method. In the second part, we focused on assessing the mercury content in 378 samples of N. luridiformis and associated samples of substrates from 38 localities with different levels of Hg content in Slovakia. From the obtained data of Hg content in samples of substrate and fungi, we evaluated ecological indicators (geoaccumulation index - Igeo, contamination factor - Cf a potential ecological risk - PER), bioconcentration indicators (bioconcentration factor - BCF; cap/stipe quotient - Qc/s) and health indicators (percentage of provisional tolerable weekly intake - %PTWI a target hazard quotient - THQ). Based on the Hg distribution results, the highest Hg content was found in the tubes & pores (3.86 mg/kg DW), followed by the flesh of cap (1.82 mg/kg DW). The lowest Hg content was in the stipe (1.23 mg/kg DW). The results of the BCF values indicate that the studied species can be included in the category of mercury accumulators. The results of the ecological indices representing the state of soil pollution pointed out that two localities (Malachov and Nizná Slaná) stood apart from all monitored localities and showed a state of an extremely disturbed environment. This fact was also reflected in the values of Hg content in the fruiting bodies of the studied mushroom species. In the case of the consumption of mushrooms from these localities, it can be stated that long-term and regular consumption could have a negative non-carcinogenic effect on the health of consumers. It was confirmed by the %PTWI (Malachov: 57.8%; Nizná Slaná: 53.2%) and THQ (Malachov: 1.11 Nizná Slaná: 1.02). The locality Cacín-Jelsovec is interesting from the bioconcentration characteristics point of view, where the level of environmental pollution was the lowest (Hg content in the soil was below the background value) compared to other localities, however, the THQ value was the highest (1.29).

Human health risks and benefits assessment based on OCPs, PCBs, toxic elements and fatty acids in the pelagic fish species from the Adriatic Sea.

Benefits and risks of the fish consumption should be assessed to balance the ingestion of healthy omega-3 fatty acids and adverse chemicals. Persistent organic pollutants-POPs (organochlorine pesticides-OCPs and polychlorinated biphenyls-PCB), macro- and micro-elements and fatty acid contents were determined in six fish species from the Adriatic Sea to assess health risks for consumers (worst-case scenario, diseases development risks and benefit-risk). 16 element, 24 POPs and 14 fatty acid contents were determined in six pelagic species which can be used in human diet. Element concentrations were determined by inductively coupled plasma mass spectrometry (ICP-MS), POPs by high-resolution gas chromatography and fatty acid content by gas-liquid chromatography. Diet based on chub mackerel and round sardinella showed lower daily intake (DI) of POPs and highest DI of essential omega-3 fatty acids than other investigated species. Lower ingestion of toxic elements can be observed by consuming anchovy and round sardinella. Based on POP concentrations, there was not observed non-carcinogenic (HI) nor carcinogenic (CR) risks for consumers. Based on element concentrations, there was low HI (0.1 ≥ HI ≥ 1), while the maximum HIs and outlier values (horse mackerel and anchovy samples) implied the presence of HI (HI > 1). The most significant contributor to total non-carcinogenic and carcinogenic risks was inorganic arsenic (inorganic As). Acceptable CR for consumers was assessed, but maximum CR for consumers of horse mackerel and anchovy (CR ≥ 1 × 10-6) showed adverse effects on human health. There were low HIs for developing cardiovascular, nervous, and reproductive diseases, and maximum HIs were higher than 1. Acceptable (1 × 10-4≥CR ≥ 1 × 10-6) risks were observed for developing cancer of nervous system and reproductive organs. Among investigated fish samples, those with higher Æ©BR (benefit-risks) and BR for arsenic (As) than median value have a higher risk than benefits in the human diet.

Environmental pollution influence to soil-plant-air system in organic vineyard: bioavailability, environmental, and health risk assessment.

This study was performed in organic vineyard to assess integrated pollution in soil-plant-air system by potentially toxic elements (PTE). Concentrations of 26 PTE were determined in soil, grapevine, and air biomonitors (moss bags) using ICP-OES and ICP-MS. Environmental implication assessment of soil did not show pollution by PTE, except for B in samples collected in the middle of grapevine season (July). Despite low total Cd concentrations in soil, it has the highest influence on increase of environmental risk. Based on biological accumulation concentration (BAC), grapevine is not hyperaccumulator of PTE from soil. Advanced classification algorithm, Kohonen self-organizing map (SOM), was applied to compare environmental implications in organic with conventional vineyards. PTE concentrations were significantly lower in organic than conventional grapevine. PTE concentrations were higher in the outer (leaf and petiole) than in the inner grapevine parts (skin, pulp, and seed). Some airborne elements have an influence on outer grapevine parts, especially on leaves (ratio factor-RF > 1). Moss bag technique testified about lower enrichment of airborne elements compared with the conventional vineyard and urban microenvironments. Environmental and health risk assessments confirmed that organic production is harmless for field workers and grape consumers.

Release of wood extractable elements in experimental spirit model: Health risk assessment of the wood species generated in Balkan cooperage.

This work investigates the release of toxic elements from wood into the experimental spirit models and the safety risks for consumers. The spirit models were prepared as ethanolic extracts using the procedure which reproduces maturation of spirits. Investigation included staves of wood species commonly used in Balkan cooperage: mulberry, Myrobalan plum, black locust, wild cherry, and various oaks. Potassium was the most abundant element, except in the wild cherry extract where calcium was dominant, and the Myrobalan plum extract where phosphorus was the most abundant. The parameters for the health risk assessment, such as hazard index (HI) and hazard quotient (HQ) were calculated for potentially toxic elements and indicated that all wood extracts would be safe for human consumption. Owing to the proven abundance of phenolics in the investigated wood extracts, relations among elements and phenolics were also studied and conclusions were made based on the statistically significant correlations.

Pollution and Health Risk Assessments of Potentially Toxic Elements in Soil and Sediment Samples in a Petrochemical Industry and Surrounding Area.

The pollution state and health risk assessment of potentially toxic elements (PTE) in soil and sediment samples of the petrochemical industry and its surrounding area are evaluated in this study. The pseudo-total contents of Ba, Cd, Co, Cu, Cr, Mn, Ni, Pb, V, Zn, As, Hg, and Se were measured by inductively coupled plasma-optical emission spectrometry (ICP/OES) in analyzed samples. Instead of determining total content, we performed aqua regia of the samples. The silicate matrix remained, and the quantities of elements that are within the silicate matrix do not represent an environmental danger. The soils from the chlor-alkali plant are highly polluted by Hg (the enrichment factor values were above 6000), and by Cu, Cd, Pb, and Zn, while the sediment samples from the wastewater channel are polluted with Cr, Cd, and Hg. The measured element contents are used for calculating health risk criteria for a composite worker (a worker who is exposed, long-term, during the work day) and for residential people. Hg is the element that mainly contributes to non-carcinogenic risks within the petrochemical area. The highest value of total carcinogenic risk obtained in the sediment sample from the wastewater channel, and the metal that mostly contributes is Cr. The areas closest to the petrochemical industry have higher values of health risk criteria parameters and pollution indices. The areas that are located further to the north and south from the petrochemical industry are less burdened with the analyzed elements, which is significant because the closest city and village are situated in those directions.

Integrated approach to environmental pollution investigation - Spatial and temporal patterns of potentially toxic elements and magnetic particles in vineyard through the entire grapevine season.

An integrated approach to the investigation of potentially toxic elements (PTEs) was applied to the soil and grapevine leaf samples collected from vineyard environment through the grapevine season. To investigate mobile and bioavailable concentrations of PTEs, six single extraction procedures and pseudo-total digestion were applied to the samples. The element concentrations in the samples were measured using inductively coupled plasma-optical emission spectrometry (ICP-OES) and inductively coupled plasma-mass spectrometry (ICP-MS). To assess atmospheric particle deposition, saturation isothermal remanent magnetisation (SIRM) was applied to the leaf samples. The obtained PTE concentrations in samples were used for calculating various ecological implications in the vineyard environment. The notable environmental pollution implications were estimated for As, B, Cd, Co, Cr, Cu, Mn, Ni and Sr. The environmental risk (RI) of the elements soluble under low-acid conditions influenced soil bioavailability risk. The most bioavailable elements from soil to leaves were Mn, Ni and Sr, followed by Cr and Cu. Cadmium and Co were strongly-bonded in the soil and were not bioavailable. The most suitable extractants for assessing bioavailability in the soil-leaf system were chelating agent Na2EDTA, and weak salt solutions CaCl2 and NH4NO3. The biological accumulation concentrations (BACs) of B, Ba, Cd, Co, Ni and Zn were decreasing in the leaves through the grapevine growing phases, that is contributed to the decreasing agrochemical application through the season. The BACs of Co, Cr, Sb and Pb, in July (veraison), were higher than in other phases, which indicate anthropogenic activities. According to correlations between biogeochemical index (BGI) and BAC, Cu and Na were mostly bioaccumulated from soil to leaves due to agrochemical applications, while bioaccumulation of B, Cd, Sb and Sr could be influenced by the other anthropogenic sources. Significant correlations between PTE concentrations and SIRM imply that leaves indicate Co, Cr and Ni air pollution in the vineyard environment.

Canned sea fish marketed in Serbia: their zinc, copper, and iron levels and contribution to the dietary intake.

The aim of this study was to determine the levels of Zn, Cu, and Fe in three canned fish species marketed Serbia to see if they meet recommended daily intake requirements or exceed safety limits. We collected a total of 207 samples of canned tuna, sardine, and mackerel, in oil or tomato sauce and analysed them with inductively coupled plasma mass spectrometry (ICP-MS) after acid digestion. The highest levels were obtained for Zn (15.1 mg kg-1) and Cu (1.37 mg kg-1) in sardine in oil and tomato sauce, respectively, and for Fe (18.98 mg kg-1) in mackerel in tomato sauce. Our results keep within the ranges reported by several national food databases and available literature data, with a few exceptions. Our findings also single out canned sardines as the richest source of the three essential elements combined. The estimated daily intake (EDI) of the three essential elements, however, was subpar, and ranged between 0.14 % and 0.72 % of the recommended dietary allowance (RDA) for Zn, Cu, and Fe.

Ranking and similarity of conventional, microwave and ultrasound element sequential extraction methods.

This study aims to compare three extraction techniques of four sequential element extraction steps from soil and sediment samples that were taken from the location of the Pancevo petrochemical industry (Serbia). Elements were extracted using three different techniques: conventional, microwave and ultrasound extraction. A novel procedure - sum of the ranking differences (SRD) - was able to rank the techniques and elements, to see whether this method is a suitable tool to reveal the similarities and dissimilarities in element extraction techniques, provided that a proper ranking reference is available. The concentrations of the following elements Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Si, Sn, Sr, V and Zn were determined through ICP OES. The different efficiencies and recovery values of element concentrations using each of the three extraction techniques were examined by the CRM BCR-701. By using SRD, we obtained a better separation between the different extraction techniques and steps when we rank their differences among the samples while lower separation was obtained according to analysed elements. Appling this method for ordering the elements could be useful for three purposes: (i) to find possible associations among the elements; (ii) to find possible elements that have outlier concentrations or (iii) detect differences in geochemical origin or behaviour of elements. Cross-validation of the SRD values in combination with cluster and principal component analysis revealed the same groups of extraction steps and techniques.

Bioavailability of potentially toxic elements in soil-grapevine (leaf, skin, pulp and seed) system and environmental and health risk assessment.

Monitoring of potentially toxic elements in agricultural soil represents the first measure of caution regarding food safety, while research into element bioavailability should be a step forward in understanding the element transportation chain. This study was conducted in the grapevine growing area ("Oplenac Wine Route") for investigating element bioavailability in the soil-grapevine system accompanied by an assessment of the ecological implications and human health risk. Single extraction procedures (CH3COOH, Na2EDTA, CaCl2, NH4NO3 and deionised H2O) and digestion were performed to estimate the bioavailability of 22 elements (Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Sb, Sr, V and Zn) from the topsoil (0-30 cm) and subsoil (30-60 cm) to the grapevine parts (leaf, skin, pulp and seed) and wine. The extractants were effective comparing to the pseudo-total concentrations in following order Na2EDTA ˃ CH3COOH ˃ NH4NO3 ˃ CaCl2, H2O 2 h and 16 h. The most suitable extractants for assessing the bioavailability of the elements from the soil to the grapevine parts were CaCl2, NH4NO3 and Na2EDTA, but deionised H2O could be suitable, as well. The results showed that Ba was the most bioavailable element in the soil-grapevine system. Contamination factor implied a moderate contamination (1 < CF < 3) of the soil. The concentrations of Cr, Ni and Cd in the soil were above the maximum allowed concentrations. According to the biological accumulation coefficient (BAC), the grape seeds and grapevine leaves mostly accumulated Cu and Zn from the soil, respectively. Based on ratio factor (RF > 1), the influence of atmospheric deposition on the aerial grapevine parts (leaves and grape skin) was observed. Nevertheless, low adverse health risk effects (HI < 1 and R ≤ 1 × 10-6) were estimated for farmers and grape and wine consumers.

Assessment of species-specific and temporal variations of major, trace and rare earth elements in vineyard ambient using moss bags.

Since the methodological parameters of moss bag biomonitoring have rarely been investigated for the application in agricultural areas, two mosses, Sphagnum girgensohnii (a species of the most recommended biomonitoring genus) and Hypnum cupressiforme (commonly available), were verified in a vineyard ambient. The moss bags were exposed along transects in six vineyard parcels during the grapevine season (March‒September 2015). To select an appropriate period for the reliable 'signal' of the element enrichment in the mosses, the bags were simultaneously exposed during five periods (3 × 2 months, 1 × 4 months, and 1 × 6 months). Assuming that vineyard is susceptible to contamination originated from different agricultural treatments, a wide range of elements (41) were determined in the moss and topsoil samples. The mosses were significantly enriched by the elements during the 2-month bag exposure which gradually increasing up to 6 months, but Cu and Ni exhibited the noticeable fluctuations during the grapevine season. However, the 6-month exposure of moss bags could be recommended for comparative studies among different vineyards because it reflects the ambient pollution comprising unpredictable treatments of grapevine applied during the whole season. Although higher element concentrations were determined in S. girgensohnii than H. cupressiforme, both species reflected the spatio-temporal changes in the ambient element content. Moreover, the significant correlation of the element (Cr, Cu, Sb, and Ti) concentrations between the mosses, and the same pairs of the elements correlated within the species, imply the comparable use of S. girgensohnii and H. cupressiforme in the vineyard (agricultural) ambient. Finally, both the moss bags and the soil analyses suggest that vineyard represents a dominant diffuse pollution source of As, Cr, Cu, Ni, Fe, and V.

Assessment of major and trace element bioavailability in vineyard soil applying different single extraction procedures and pseudo-total digestion.

A different single extraction procedures (CH3COOH, Na2EDTA, CaCl2, NH4NO3, deionized water), and pseudo-total digestion (aqua regia) were applied to determine major (Al, Fe, K, Mn, Na, P, S, and Si) and trace (Cd, Co, Cr, Cu, Mo, Ni, Pb, V, and Zn) element bioavailability in a topsoil from the experimental vineyard ("Radmilovac", Belgrade, Serbia). For the first time, the extraction with deionized water during 16 h was tested as an alternative method for isolating bioavailable major and trace elements from the soil. Concentrations of the elements were determined by inductively coupled plasma - optical emission spectroscopy (ICP-OES). The extraction of Cu and S from the soil by deionized water during 16 h extracting, NH4NO3, and CaCl2 indicated that these elements could originate from the anthropogenic sources, such as fungicide. In addition according to the soil - plant experiment, performed as a preliminary experiment for future studies in vineyards, deionized water was recommended for isolation of bioavailable elements from grape seed and grape pulp; CH3COOH, Na2EDTA, CaCl2 and NH4NO3 for grape skin, while for assessment of leaf bioavailable elements from soil fraction, aqua regia was recommended. In addition, identification of similarities between the plant parts and the plant species were performed. Applying environmental risk assessment formulas, the most polluted vineyard parcel in the vineyard region "Radmilovac" was determined. The leaves of some grapevine species showed the high ability for accumulation some of the potentially toxic trace elements from the soil.

Evaluation of sediment contamination with heavy metals: the importance of determining appropriate background content and suitable element for normalization.

In the present study, concentrations of heavy metals (Cd, Cu, Co, Mn, Cr, Ni, Pb, and Zn) were determined at 35 river sediments in Serbia. The anthropogenic heavy metals input and quantification of the metal enrichment degree in sediments were estimated by calculating geo-accumulation indices (I(geo)) and enrichment factors (EF). These pollution indices have been calculated using different background values (continental crust and local background values) and different element used for normalization (Al and Fe), followed by result comparison. The EF values calculated with continental crust as background (minor to extremely severe enrichment) were higher than when regional background values were used (minor to moderate enrichment). Significant influence of background values on the I(geo) values is observed. Values of geo-accumulation index (<2) revealed that studied river sediments are remaining unpolluted to moderately polluted with Co, Mn, Cr, and Ni. Significant pollution in the sediments was observed for Cd, Cu, Pb, and Zn elements. The results of this study confirm the relevance of precise and accurate determining of local background concentrations while assessing sediment pollution. The values of EFs for studied elements were more influenced by the choice of background values than selection of element used for normalization. Our recommendation would be to use the local and regional background content in quantification of metal contamination in sediments, since these values differ and are site and region dependent.

Trace elements in size-segregated urban aerosol in relation to the anthropogenic emission sources and the resuspension.

Size segregated particulate samples of atmospheric aerosols in urban site of continental part of Balkans were collected during 6 months in 2008. Six stages impactor in the size ranges: Dp ≤ 0.49 µm, 0.49 < Dp ≤ 0.95 µm, 0.95 < Dp ≤ 1.5 µm, 1.5 < Dp ≤ 3.0 µm, 3.0 < Dp ≤ 7.2 µm, and 7.2 < Dp ≤ 10.0 µm was applied for sampling. ICP-MS was used to quantify elements: Al, As, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, K, Li, Na, Ni, Mg, Mn, Pb, Sb, V, and Zn. Two main groups of elements were investigated: (1) K, V, Ni, Zn, Pb, As, and Cd with high domination in nuclei mode indicating the combustion processes as a dominant sources and (2) Al, Fe, Ca, Mg, Na, Cr, Ga, Co, and Li in coarse mode indicating mechanical processes as their main origin. The strictly crustal origin is for Mg, Fe, Ca, and Co while for As, Cd, K, V, Ni, Cu, Pb, and Zn dominates the anthropogenic influence. The PCA analysis has shown that main contribution is of resuspension (PC1, σ(2) ≈ 30 %) followed by traffic (PC2, σ(2) ≈ 20 %) that are together contributing around 50 % of elements in the investigated urban aerosol. The EF model shows that major origin of Cd, K, V, Ni, Cu, Pb, Zn, and As in the fine mode is from the anthropogenic sources while increase of their contents in the coarse particles indicates their deposition from the atmosphere and soil contamination. This approach is useful for the assessment of the local resuspension influence on element's contents in the aerosol and also for the evaluation of the historical pollution of soil caused by deposition of metals from the atmosphere.

Leaching of polycyclic aromatic hydrocarbons from power plant lignite ash--influence of parameters important for environmental pollution.

Nikola Tesla B power plant (TENT B), located at the Sava River, in Obrenovac, 50 km west from the Serbian's capital, Belgrade, is the second largest coal-fired power plant in the country, consisting of two blocks, each of 620 MW capacity. In order to investigate the threat polycyclic aromatic hydrocarbons (PAHs) from deposited coal ash, obtained by coal combustion in this power plant, can represent for the surrounding environment, samples of coal ash were submitted to extraction with river water used for transport of coal ash to the dump, as well as with water of different ionic strength and acidity. It was found that, out of 16 EPA priority PAHs, only naphthalene, acenaphthylene, fluorene, phenantrene, fluoranthene, and pyrene were found in measurable concentrations in the different extracts. Their combined concentration was around 0.1 µg/L, so they do not, in terms of leached concentrations, represent serious danger for the surrounding environment. In all cases of established (and leached) PAH compounds, changes of ionic strength, acidity, or the presence of organic compounds in river water may to some extent influence the leached concentrations. However, under the examined conditions, similar to those present in the environment, leached concentrations were not more than 50 % greater than the concentrations leached by distilled water. Therefore, water desorption is likely the most important mechanism responsible for leaching of PAH compounds from filter coal ash.

Conventional, microwave, and ultrasound sequential extractions for the fractionation of metals in sediments within the Petrochemical Industry, Serbia.

In this paper, the main objective was fractionation of Cd, Cu, Ni, Pb, Zn, Ca, Fe, and K in certificate material and sediment samples gathered from and around the Petrochemical Industry using the conventional, microwave and ultrasonic sequential extraction. Microwave oven and ultrasound bath were used as an energy source for achieving faster extraction. Additional heating and boiling of samples were avoided by using lower power and shorter time for microwave and ultrasound extraction. Precision and accuracy of procedure were evaluated by using certificate material (BCR701). Acceptable accuracy of metals (87.0-111.3 %) was achieved for all three-step sequential of conventional extraction protocol. An accuracy of the fourth step has been verified with two certificate materials: BCR143R and 146R. The range of total extracted metal concentrations from sediments was similar for all three extraction techniques. A significant high percentage of Cd, Cu, and Zn were obtained after extraction of the exchangeable and acid soluble sediment fraction. Principal component analysis of values obtained after determination of risk assessment code using conventional and ultrasound sequential extraction show similarity of these values. Accuracy, recovery, and risk assessment code values imply that ultrasound sequential extraction is a more suitable, accelerated sequential extraction procedure (30 min per extraction step) than microwave extraction in applied conditions.