CuSO4/H2O2induced polydopamine/polysulfobetaine methacrylate co-deposition on poly(amino acid) membranes for improved anti-protein adsorption and antibacterial activity.

Stopping postoperative soft tissue adhesions is one of the most challenging clinical problems that needs to be addressed urgently to avoid secondary injury and pain to patients. Currently, membrane materials with anti-protein adsorption and antibacterial activity are recognized as an effective and promising anti-adhesion barrier to prevent postoperative adhesion and the recurrent adhesion after adhesiolysis. Herein, poly(amino acid) (PAA), which is structurally similar to collagen, is selected as the membrane base material to successfully synthesize PAA-5 membranes with excellent mechanical and degradation properties by in-situ melt polymerization and hot-melt film-forming technology. Subsequently, the co-deposition of polydopamine/polysulfobetaine methacrylate (PDA/PSBMA) coatings induced by CuSO4/H2O2on PAA-5 membranes results in the formation of PDC-5S and PDC-10S, which exhibit excellent hemocompatibility, protein antifouling properties, and cytocompatibility. Additionally, PDC-5S and PDC-10S demonstrated significant antibacterial activity againstEscherichia coliandStaphylococcus aureus, with an inhibition rate of more than 90%. As a result, this study sheds light on newly discovered PAA membranes with anti-protein adsorption and antibacterial activity can sever as one of the promising candidates for the prevention of postoperative peritoneum adhesions.

Hierarchically Biomimetic Scaffolds with Anisotropic Micropores and Nanotopological Patterns to Promote Bone Regeneration via Geometric Modulation.

Structural engineering is an appealing means to modulate osteogenesis without the intervention of exogenous cells or therapeutic agents. In this work, a novel 3D scaffold with anisotropic micropores and nanotopographical patterns is developed. Scaffolds with oriented pores are fabricated via the selective extraction of water-soluble polyethylene oxide from its poly(ε-caprolactone) co-continuous mixture and uniaxial stretching. The plate apatite-like lamellae are subsequently hatched on the pore walls through surface-induced epitaxial crystallization. Such a unique geometric architecture yields a synergistic effect on the osteogenic capability. The prepared scaffold leads to a 19.2% and 128.0% increase in the alkaline phosphatase activity of rat bone mesenchymal stem cells compared to that of the scaffolds with only oriented pores and only nanotopographical patterns, respectively. It also induces the greatest upregulation of osteogenic-related gene expression in vitro. The cranial defect repair results demonstrate that the prepared scaffold effectively promotes new bone regeneration, as indicated by a 350% increase in collagen I expression in vivo compared to the isotropic porous scaffold without surface nanotopology after implantation for 14 weeks. Overall, this work provides geometric motifs for the transduction of biophysical cues in 3D porous scaffolds, which is a promising option for tissue engineering applications.

Identification and Biological Characterization of a New Cyst Nematode, Heterodera glycines sbsp.n. tabacum, Parasitizing Tobacco in China.

In an investigation of diseases from plant-parasitizing nematodes in Henan Province, a cyst nematode was found on tobacco roots and in rhizosphere soil. We identified this strain as a new cyst nematode subspecies, Heterodera glycines sbsp.n. tabacum. The cysts and second-stage juveniles (J2s) parasitizing Henan tobacco were larger than those of H. glycines. A single 345-bp fragment was amplified from H. glycines sbsp.n. tabacum, whereas the 345- and 181-bp fragments were amplified from the soybean cyst nematode. Thus, H. glycines sbsp.n. tabacum was distinct from H. glycines. There were base transversions at 504 sites and base transitions at 560, 858, 920, and 921 sites in the rDNA-ITS sequences of H. glycines sbsp.n. tabacum compared with H. glycines, and there were base transitions at 41, 275, 278, and 380 sites in the mtDNA-COI sequences. In the phylogenetic tree based on the rDNA-ITS and mtDNA-COI regions, H. glycines sbsp.n. tabacum was clustered on a single branch. Based on the randomly amplified polymorphic DNA (RAPD) technique, sequence characterized amplified region (SCAR)-PCR primers were designed. A single 1,113-bp fragment was amplified by specific primers (HtF1/HtR1) from H. glycines sbsp.n. tabacum, while no fragments were obtained from H. glycines. The H. glycines sbsp.n. tabacum can infect soybean plants but cannot complete its life cycle on soybean. Eleven tested tobacco cultivars were infected, with an average reproduction factor (Rf) of 9.74 and a maximum of 64.2 in 'K326'. The cumulative egg hatching rate of H. glycines sbsp.n. tabacum in the presence of tobacco root exudates was 42.6% at 32 days posthatching, which was significantly greater than that in the presence of soybean root exudates (30.3%) or sterile water (33.1%). In summary, the cyst nematode population parasitizing Henan tobacco was identified as a new subspecies, H. glycines sbsp.n. tabacum.

First report of the maize cyst nematode Heterodera zeae in Sichuan Province of Southwest China.

Maize is the largest crop planted in China. Nine species of cyst nematodes have been reported to affect maize production. Heterodera zeae, H. avenae and Punctodera chalcoensis can cause significant maize yield losses annually (Luc et al. 2005). In 1971, the maize cyst nematode H. zeae was first detected in Rajasthan, India (Koshy et al. 1971). Subsequently, it has been reported in many other countries such as the United States, Greece, Pakistan, and Egypt. In China, H. zeae was first identified in the maize fields of Laibin City, Guangxi Zhuang Autonomous Region (Wu et al., 2017). Cui et al. (2020) identified H. zeae in a maize field of Yuzhou City, Henan Province of Central China in 2018. From 2018 to 2022, a survey of cyst-forming nematodes was conducted in Southwest China. Fifteen soil samples of about 500 g each were collected from Luding County, Ganzi Prefecture of Sichuan Province. No major aboveground symptoms were shown on maize, but a few females were observed on the roots of maize in one field. The cysts and second-stage juveniles (J2s) were collected from each soil sample using Cobb's screening gravity method. A total of 8.50±2.0 cysts per 100 ml of soil on the average were observed in the field. A thin subcrystalline layer was discernible only in young cysts. Morphological and molecular studies of cysts and J2s indicated that the nematodes were identified to be H. zeae in a maize-field. Morphologically, the cysts were in a lemon shape, light brown or pearly white in color. The vulval cone was prominent. Fenestra ambifenestrate, and semifenestra were separated by a fairly wide vulval bridge, fenestral length and width were variable, and the cyst wall was shown in a zigzag pattern. The J2s' body was in a vermiform, tapering at both ends, with a hyaline tail. Stylet was strongly developed with round or slightly anteriorly directed knobs. Morphological measurements of the cysts (n = 9) determined that the mean body length was 417.2 µm (403.6 to 439.4 µm), body width was 429.7 µm (397.6 to 456.9µm); length-width ratio was 1.4 (0.75 to 3); fenestra length was 525.3 µm (498.5 to 570.7 µm); and the mean semifenestra width was 458.6 µm (403.6 to 546.3 µm). Morphometric measurements of second-stage juveniles (n = 20) showed a body length of 419.7µm (355.8 to 492.5 µm); a stylet length of 20.8 µm (19.51 to 23.3µm); a tail length of 41.5 µm (20 to 49.4 µm); and a hyaline tail length of 20.7 µm (16.6 to 24 µm). The main morphological characteristics and measured values were basically consistent with those described by Cui et al. (2022), and all of which were similar to those of H. zeae. Amplification of DNA from random single cysts (n = 5) was conducted using the protocol described by Cui et al. (2022). The rDNA-internal transcribed spacer (ITS) was amplified and sequenced using a pair of universal primers TW81 (5'-GTTTCCGTAGGTGAA CCTGC-3') and AB28 (5'-ATATGCTTAAGTTCAGCGGGT-3'). The ITS sequences were deposited at GenBank with the accession number OR811029.1. Alignments of sequences showed an identity of 98% with H. zeae sequences from China (OP692769.2, MW785772.1) and the USA (GU145616.1), which were confirmed using a pair of species-specific primers HzF1 (5'-GGGGAGGTGAATGTGGG-3') and HzR1 (5'-CCTTTGGCAATCGGTGA-3') of H. zeae with a targeted PCR fragment of 393 bp (Cui et al. 2022). Pathogenicity was conducted and confirmed by infection and reproduction on maize. Seeds (cv. Zhengda 619) were sown in three pots that contained 150 ml of a sterile soil mixture (loamy soil: sand=1:1), and 5 cysts (103 eggs/cyst on the average) were inoculated in each pot at 25/30°C, under a 12-h dark/12-h light condition (Cui et al. 2023). Fifteen days after sowing, third- and fourth-stage juveniles were observed in the rootstained with acid fuchsin, and a total of 32 cysts per maize plant on the average were collected at 40 days after sowing. The new cysts' morphological and molecular characteristics were identical to the cysts from the original soil samples. To the best of our knowledge, this is the first report of H. zeae as a pathogen on maize in Sichuan Province, Southwest China. Our findings will be useful for management and further research of maize cyst nematodes.

First record of cyst nematode (Heterodera filipjevi) on winter wheat from Shanxi Province in North China.

Heterodera avenae, H. filipjevi, and H. laptipons are considered to be the major cyst nematode pathogens affecting most cereals and causing severe crop losses (Smiley and Yan 2015). In China, H. filipjevi was first recorded in Xuchang, Henan Province (Peng et al. 2010). Recently, H. filipjevi has been found in Anhui, Hebei, Shandong and Xinjiang provinces of China (Cui et al. 2021). To further understand the latest occurrence and distribution of H. filipjevi in China, a survey of cyst nematodes was conducted in the wheat planting area of Shanxi Province of North China from June 2018 to November 2020. White female cysts (5.8 ± 2.99 cysts per plant) were found on wheat roots in the sandy soil, and wheat was displaying symptoms of dwarfing, yellowing, and had few tillers in Licheng of Changzhi (N36°32´010´´, E113°27´039´´; N36°29´050´´, E113°23´023´´; N36°29´035´´, E113°22´020´´) and Zezhou of Jincheng (N35°33´057´´, E112°56´020´´) in Shanxi Province, and second-stage juveniles (J2s) were obtained from 13 soil samples using the sieving-decanting method. Four of the 13 samples were identified as H. filipjevi on the basis of morphological and molecular studies of female cysts and J2s. Morphologically, the cysts were lemon shaped and featured a pronounced vulval cone. The color ranged from light to dark brown. The white female shell was covered with a white crystalline layer. The vulval cone was bifenestrate with horseshoe-shaped bullae numerous and distinct, and a strongly developed underbridge. The main measurements (mean ± SD, range) of cysts (n = 13) were as follows: body length including neck 780.5 ± 53.9 µm (692 to 843 µm); body width 527.3 ± 55.5 µm (435 to 620 µm); length/width ratio 1.50 ± 0.21 (1.20 to 1.93); fenestra length 55.5 ± 4.1 µm (49 to 61 µm); fenestra width 24.8 ± 2.2 µm (21.1 to 28.8 µm); vulval slit length 9.0 ± 0.7 µm (7.8 to 9.6 µm); and underbridge length 66.8 ± 5.0 µm (61 to 77 µm). The measurements of J2s (n = 13) were as follows: body length 554.4 ± 23.4 µm (520to 587 µm); stylet length 22.7 ± 0.7 µm (21.5 to 23.8 µm); tail length 61.0 ± 5.5 µm (51.2 to 68.9 µm); and hyaline tail terminus length 37.3 ± 2.7 µm (33.4 to 42.3 µm). These morphological measurements are within the range characteristic of H. filipjevi (Peng et al. 2010). Genomic DNA was extracted from individual cyst (n = 6) and the rDNA internal transcribed spacer (ITS) sequence was amplified using the universal primers TW81 and AB28 (Joyce et al. 1994). The PCR test for each sample was repeated five times. The obtained ITS sequences (GenBank accession No. OQ421499 to OQ421502, 1054 bp) showed more than 99.5% similarity to those of H. filipjevi from the United States (GU079654 and KP878490), Turkey (KR704304 and KR704292), and China (MW789611, KY448473 and KT314234). The results were confirmed again by the species-specific primers HfF1 and HfR1of H. filipjevi and the target PCR fragments of 646 bp were obtained (Peng et al. 2013). The pathogenicity of H. filipjevi was verified by infesting winter wheat (Triticum aestivum 'Wenmai 19') and studying nematode developmentand reproduction with growth chamber (Cui et al. 2015). Eggs were hatched at 14-16°C, and freshly hatched J2s were used to inoculate wheat plants when the roots were approximately 1-centimeter long. Fifteen wheat plants were inoculated with 200 J2s, and three wheat plants without J2s were set as controls (Cui et al. 2021). Parasitic J2s and third- and fourth-stage juveniles were found in roots stained with acid fuchsin at 5, 15, and 25 days after inoculation (DAI), adult females were detected at 50 DAI, and a mean of 23.7 cysts per pot were extracted at 70 DAI (Cui et al. 2015). The morphological and molecular characteristics of the new cysts were identical to those of the H. filipjevi cysts from the original field samples, and no cysts formed in the control groups. Wheat is the main food and economic crop in Shanxi, and H. filipjevi, a potential threat to cereal crop production in Shanxi, should arouse sufficient attention. H. filipjevi is major cyst nematode pathogens of wheat and shows high prevalence in China. The loss of wheat production due to H. filipjevi is as high as 32.3% when the initial density ≥ 64 eggs/mL in soil (Li 2018). To the best of our knowledge, this is the first report of H. filipjevi in Shanxi Province of North China.

Effects of ATP on the Physicochemical Properties and Cytocompatibility of Calcium Sulfate/Calcium Citrate Composite Cement.

Adenosine triphosphate (ATP), acting as a source of energy, has effects on cellular activities, such as adhesion, proliferation, and differentiation. In this study, ATP-loaded calcium sulfate hemihydrate/calcium citrate tetrahydrate cement (ATP/CSH/CCT) was successfully prepared for the first time. The effect of different contents of ATP on the structure and physicochemical properties of ATP/CSH/CCT was also studied in detail. The results indicated that incorporating ATP into the cement did not significantly alter their structures. However, the addition ratio of ATP directly impacted the mechanical properties and in vitro degradation properties of the composite bone cement. The compressive strength of ATP/CSH/CCT gradually decreased with an increasing ATP content. The degradation rate of ATP/CSH/CCT did not significantly change at low concentrations of ATP, but it increased with a higher ATP content. The composite cement induced the deposition of a Ca-P layer in a phosphate buffer solution (PBS, pH = 7.4). Additionally, the release of ATP from the composite cement was controlled. The ATP was controlled releasing at the 0.5% and 1% ATP in cement by the diffusion of ATP and the degradation of the cement, whereas it was controlled by the diffusion process merely at the 0.1% ATP in cement. Furthermore, ATP/CSH/CCT demonstrated good cytoactivity with the addition of ATP and is expected to be used for the repair and regeneration of bone tissue.

Fabricating biodegradable calcium phosphate/calcium sulfate cement reinforced with cellulose: in vitro and in vivo studies.

Osteoporosis is a growing public health concern worldwide. To avoid extra surgeries, developing biodegradable bone cement is critical for the treatment of osteoporosis. Herein, we designed calcium phosphate/calcium sulfate cement reinforced with sodium carboxymethyl cellulose (CMC/OPC). It presents an appropriate physicochemical performance for clinical handling. Meanwhile, CMC/OPC bone cement promotes osteogenic differentiation in vitro. Results of the immune response in vitro and in vivo confirmed that increasing the cellulose content triggered macrophage switching into the M2 phenotype and CMC/OPC exhibited significant anti-inflammation. Furthermore, in vitro and in vivo degradation demonstrated that cellulose tailors the degradation rate of composite bone cement, which achieved a linear degradation process and could degrade by more than 90% for 12 weeks. In summary, the composite bone cement CMC/OPC is a promising candidate for bone repair applications.

Arg-Gly-Asp peptide functionalized poly-amino acid/ poly (p-benzamide) copolymer with enhanced mechanical properties and osteogenicity.

Poly-amino acid (PAA) is a promising biomaterial in biomedical engineering due to its similar amide bond structure to collagen and excellent biocompatibility, but the lack of osteogenic activity and inferior mechanical strength limit its long-term application in orthopedics. In this study, a poly-amino acid/poly (p-benzamide) (PAA-PBA) copolymer with high mechanical strength was designed and fabricated by the method of solution polymerization. The chain structures, thermal properties and mechanical properties of these polymers were evaluated and results showed that PBA greatly promoted the mechanical properties of PAA, and the copolymer performed the maximum mechanical strengths with compressive strength, bending strength and tensile strength of 123 MPa, 107 MPa and, 95 MPa, respectively. To increase the bioactivity of surface, a bioactive coating that consists of poly-(dopamine) (PDA) nanolayers and tripeptide Arginine-Glycine-Aspartic acid (RGD) on sulfonated PAA-PBA copolymer was created. A porous structure appeared on the surface after modification, the surface roughness and hydrophilicity of copolymer has been improved obviously after introducing PDA and RGD peptide coating. The in vitro bioactivity evaluation demonstrated that the RGD-functionalized sample showed a significantly improved ability to promote bone apatite mineralization, cell adhesion, proliferation and osteogenic differentiation. In a word, such a strategy of material synthesis and surface modification method shows a great potential for broadening the use of PAA in the application of load-bearing bone substitute biomaterials.

First record of Aphelenchoides besseyi on foxtail millet (Setaria italica) in Henan Province of China.

Aphelenchoides besseyi is one of the important plant-parasitic nematodes on rice, reducing approximate 10-20% of the rice yield annually (Jones et al. 2013). Foxtail millet (Setaria italica) has been a major cereal crop in Northern China, especially in the semi-arid areas of this region, for thousands of years. In August of 2019 and 2020, a survey of nematodes on autumn grain crops was performed each year. One foxtail millet field (N34° 58' 027″ and E113° 39' 059″) in Yuanyang County of Henan Province caught our attention. Some upper leaves showed chlorosis without or with necrotic tips, and flag leaves presented crinkling and distortion, stalks were colored, earheads were vertical, glumes were brown or light black and open, and grains became thin. A total of ten samples were collected, and the nematodes were isolated from the spike pieces by shallow plate method and counted under a stereomicroscope. The average number of nematodes per earhead of foxtail millet counted up to 1738.75 ± 107.72. Morphologically, females were slender with a short stylet, an oval metacorpus with a distinct valve, a labial region slightly wider than the first body annulus and a conoid tail with a terminus bearing a star-shaped mucro with four pointed processes. The females were characterized as follows (mean ± SD; n=20): body length (L) = 668.92 ± 12.73 µm (647.38 to 689.70 µm); maximum body width (W) = 14.35 ± 1.11 µm (12.12 to 16.88 µm); L/W = 46.83 ± 2.94 (40.44 to 50.03); tail length = 38.93 ± 3.48 µm (33.41 to 45.92 µm); L/tail length = 17.31 ± 1.44 (14.47 to 19.62); and stylet length (ST) = 11.57 ± 0.57 µm (10.77 to 12.34 µm). The males had three pairs of ventrosubmedian papillae with the first one adanal, spicula curved with a slight basal process, terminus bearing four mucrones arranged variably, and the whole worm was in 'J' shape. The males could be described as follows (mean ± SD, n = 20): L = 606.66 ± 10.70 µm (586.49 to 626.37 µm); W = 13.95 ± 0.60 µm (12.71 to 14.94 µm); L/W = 43.55 ± 1.69 (40.73 to 46.43); tail length = 35.54 ± 1.93 µm (31.41 to 38.18 µm); L/tail length = 17.07 ± 0.79 (16.05 to 18.67); ST = 11.53 ± 0.56 µm (1061 to 12.76 µm). All the key morphometrics were consistent with those of A. besseyi reported from Brazil (Favoreto et al. 2018) and China (Lin et al. 2004; Ou et al. 2014). The amplifications of rDNA internal transcribed spacer (ITS) fragments generated a PCR fragment of 830 bp from a single nematode, using the primers set TW81 (5'-GTTTCCGTAGGTGAACCTGC-3') and AB28 (5'-ATATGCTTAAGTTCAGCGGGT-3') (Joyce et al. 1994). Five independent PCR experiments were conducted, and all the PCR products were purified and sequenced. Nucleotide sequence of ITS-rDNA was deposited in GenBank with Accession Number OK090549.1. The obtained ITS region sequence was more than 99% identical to those of A. besseyi reported from China (MW216945.1) and India (JF826518.1, JF826519.1 and JF826517.1). These ITS sequence results further supported that the isolated nematodes were A. besseyi. Subsequently, the species-specific primers of A. besseyi (BSF, 5'-TCGATGAAGAACGCAGTGAATT-3' and BSR, 5'-AGATCAAAAGCCAATCGAATCAT-3') were used for confirmation by PCR (Cui et al. 2010). An expected PCR fragment of 312 bp was obtained, which was consistent with those of A. besseyi reported previously. The pathogenicity of identified A. besseyi was confirmed by infection of foxtail millet (Setaria italica cv. 'Yugu33'). Foxtail millet budding seeds were sown in the pots contained 150 mL of sterile soil mixture. In two weeks, 10 seedlings were inoculated with 100 A. besseyi each, and 4 plants were non-inoculated as the control. The foxtail millet seedlings were grown in a plant-growth chamber at 25/30°C under 12 h dark/12 h light. On the average, 73.3 and 138.2 of A. besseyi were isolated from each plant at 15 and 40 days post inoculation, respectively. Both the morphological and molecular characteristics were identical with those nematodes obtained from the original samples. All the upper leaves of the inoculated plants showed chlorosis and necrosis, symptoms that were similar to those observed in the field, and neither symptom developed on the non-inoculated control plants, nor were nematodes re-isolated from the control plants. To the best of our knowledge, this is the first record of A. besseyi on foxtail millet in Henan Province of North China. Henan is one of the most important grain-producing areas in China, and A. besseyi is an important domestic quarantine nematode, which may become a severe threat to cereal production in Henan Province. Our findings will be very beneficial for A. besseyi management and further research on foxtail millet in Henan Province of North China.

Effects of bovine cancellous bone powder/poly amino acid composites on cellular behaviors and osteogenic performances.

Xenogeneic bone has good biological activity, but eliminating immunogenicity, while retaining osteogenic abilities, is a challenge. By combining xenogeneic bone with poly amino acid (PAA) that has an amide bond structure, a new type of composite conforming to bionics and low immunogenicity may be obtained. In this study, according to the principles of component bionics, three composites of delipidized cancellous bone powder (DCBP) and PAA were designed and obtained by anin situpolycondensation method, an extrusion molding (EM) method, and a solution-blend method. The three composites were all macroscopically uniform, non-cytotoxic, and demonstrated low immunogenicity by effective removal of residual antigens during preparation. Compared with PAA, mouse bone marrow mesenchymal stem cells (BMSCs) on the surfaces of three composites showed different cellular morphologies. The effects of different preparation methods and cellular morphology on cellular differentiation were confirmed by alkaline phosphatase activity, calcium nodule formation and the expression levels of osteogenic differentiation-related genes (bone morphogenetic protein 2, runt-related transcription factor 2, osteopontin and osteocalcin). Among these composites, DCBP/PAA EM showed best cell proliferation and osteogenic differentiationin vitro, and possessed greater bone formation than PAA in a rabbit femoral condyle study. This study may provide a new method for preparing bioactive bone repair materials with low immunogenicity and superior ability to stimulate differentiation of BMSCsin vitroand osteogenesisin vivo. DCBP/PAA EM might be a promising bone repair material for bone defect treatment.

Effects of pullulan on the biomechanical and anti-collapse properties of dicalcium phosphate dihydrate bone cement.

In this work, a modified dicalcium phosphate dihydrate (DCPD) bone cement with unique biodegradable ability in a calcium phosphate cement system was prepared by the hydration reaction of monocalcium phosphate monohydrate and calcium oxide and integration with pullulan (Pul), a non-toxic, biocompatible, viscous, and water-soluble polysaccharide that has been successfully used to improve defects in DCPD bone cement, especially its rapid solidification, fragile mechanical properties, and easy collapse. The effect of different contents of Pul on the structure and properties of DCPD were also studied in detail. The modified cement was characterised by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, ultraviolet-visible absorption, X-ray photoelectron spectroscopy analysis, and rheological property measurements. The results indicated that Pul promoted the hydration formation of DCPD, and interface bonding occurred between Pul and DCPD. With increasing content of Pul, the setting time of the DCPD bone cement increased from 2.6 min to 42.3 min, the compressive strength increased from 0 MPa to 20.4 MPa, and the anti-collapse ability also improved owing to the strong interface bonding, implying that the DCPD bone cement improved by Pul has better potential for application in the field of non-loading bone regenerative medicine compared to unmodified DCPD bone cement.

Developing a novel magnesium calcium phosphate/sodium alginate composite cement with high strength and proper self-setting time for bone repair.

In this work, novel magnesium calcium phosphate/sodium alginate composite cements were successfully fabricated with a proper setting time (5-24 min) and high compressive strength (91.1 MPa). The physicochemical and biological properties of the cement in vitro were fully characterized. The composite cements could gradually degrade in PBS as the soaking time increase, and the weight loss reached 20.74% by the end of 56th day. The cements could induce the deposition of Ca-P layer in SBF. Cell experiments proved that the extracts of the composite cements can effectively promote the proliferation and differentiation of the mouse bone marrow mesenchymal stem cells (MSCs). These preliminary results indicate that the magnesium calcium phosphate/sodium alginate composite cements could be promising as potential bone repair candidate materials.

First report of Heterodera filipjevi on winter wheat from Hebei Province in North China.

Three of the cereal cyst nematodes, Heterodera avenae, H. filipjevi and H. latipons are considered to be the most economically important cyst nematodes that affect cultivated cereals around the world. H. filipjevi was first detected in China from Xuchang, Henan Province in 2010 (Peng et al. 2010) and now has been recorded in the Central China of Henan, Shandong and Anhui provinces and the Northwest China of Xinjiang Uygur Autonomous Region (Cui et al. 2020). In June 2019, 42 samples consisting of roots and soil were collected from winter wheat fields in Hebei Province of North China. Cysts were detected in 37 soil samples with a mean of 6.4 ± 1.67 cysts per 100 ml of soil. Cysts and second-stage juveniles (J2s) were extracted from root and soil following Cobb's sieving gravity method. Morphological and molecular studies of J2s and cysts confirmed its identity with H. filipjevi in 5 samples from Handan (N36°10'052" and E114°35'056"; N36°37'054" and E114°22'052"), Xingtai (N36°53'060" and E114°30'011") and Shijiazhuang (N 37°26'048" and E 116°05'039") in Hebei Province, China. Morphologically, the cysts are lemon-shaped, light or dark brown in color. The vulval cone is bifenestrate with horseshoe-shaped semifenestrae, strongly globular bullae, and well-developed underbridge. Measurements (mean +_ sd (range)) of cysts (n=10), body length not including neck is 743.0 ± 36.1 µm (665 - 780 µm), body width is 559.0 ± 50.0 µm (455 - 639 µm), length / width ratio is 1.33 ± 0.07 (1.20 - 1.46); neck length is 99.3 ± 8.8 µm (85 - 122 µm); fenestrae length is 56.8 ± 5.0 µm (49 - 65 µm) and width is 25.5 ± 1.8 µm (21.1 - 27.8 µm); underbridge length is 84.0 ± 8.1 µm (62 - 93 µm); and vulval slit length is 8.6 ± 0.5 µm (7.2 - 9.1 µm). Measurements of J2s (n = 12), body length is 541 ± 11.4 µm (490 - 578 µm); stylet length is 22.3 ± 0.5 µm (22.0 - 25.0 µm) with anchor-shaped basal knobs; tail length is 57.7 ± 3.7 µm (52.7 - 65.2 µm), and hyaline tail terminal length is 36.5 ± 2.8 µm (32 - 39.8 µm). The tail had a sharp terminus. Morphology of the cysts and J2s were consistent with the record of H. filipjevi (Peng et al. 2010; Subbotin et al. 2010). The amplifications of rDNA-internal transcribed spacer (ITS) fragments were generated with a PCR fragment of 1054 bp from single cysts of each population, using primers TW81 and AB28 (Joyce et al. 1994). The PCR tests for each sample were repeated five times. The PCR product was purified and sequenced. All nucleotide sequences of ITS-rDNA were submitted to GenBank under accession numbers MW282843-6. Sequences from the ITS region were more than 99.5% identical to those of H. filipjevi from Egypt (KF225725), Turkey (KR704308, KR704293 and MN848333) and China (KT314234, MT254744 and KY448473). These results from ITS supported its identity as H. filipjevi. The results were also confirmed by species specific sequence characterized amplified region primers of H. filipjevi (Peng et al. 2013). Pathogenicity of the H. filipjevi was confirmed by infection of winter wheat (Triticum aestivum L cv. 'Aikang58') and examination of the nematode development and reproduction. Wheat seeds were germinated in petri dishes and then transplanted into five polyvinyl chloride tubs (3 cm in diameter, 25 cm in length) that contained 150 cm3 of a sterile soil mixture (loamy soil: sand = 1:1), each with 5 cysts (mean of 252.0 eggs/cyst). Plants were grown in an artificial climate box for one week at 14/18°C, two weeks at 16/20°C, five weeks at 18/25°C and two weeks at 22/30°C, under 8 h of darkness/16 h light and normal culturing practices (Cui et al. 2015). The parasitic J2s, third and fourth-stage juveniles, and adult females were observed in roots stained with acid fuchsin at 10, 20, 30, and 50 days after inoculation (DAI), and an average of 32.0 cysts per tubes were extracted 70 DAI. The new cyst' morphological and molecular characteristics were identical to the H. filipjevi cysts from the original soil samples. Three other tubes without cysts were set as control and there were no newly formed cysts. Heterodera avenae and H. filipjevi had been detected in a total of 16 wheat-producing provinces in China, which resulted in losses of 1.9 billion CNY year-1 (Cui et al. 2015). To our knowledge, this is the first report of H. filipjevi in Hebei Province of North China. Cereal cyst nematodes are easily transferred to non-infested areas by many avenues, resulting in increased species and pathotype complexity (Cui et al. 2020). Once H. filipjevi continues to spread in main wheat producing area of China, it could become be a new threat to cereals production. It is time to take effective control methods to prevent H. filipjevi further dispersal, especially through the farming machinery transmission. Hebei Province is one of the most important major grain-producing areas, our findings will be very beneficial for H. filipjevi management and further research on winter wheat in Hebei Province, North China.

Biological evaluation of the modified nano-amorphous phosphate calcium doped with citrate/poly-amino acid composite as a potential candidate for bone repair and reconstruction.

Large numbers of research works related to fabricating organic-inorganic composite materials have been carried out to mimic the natural structure of bone. In this study, a new modified n-ACP doped with citrate (n-ACP-cit)/poly (amino acids) (PAA) composite (n-ACP-cit/PAA) was synthesized by employing high bioactive n-ACP-cit and the biodegradable and biocompatible PAA copolymer. Its basic structure was characterized by X-ray diffraction spectroscopy, Fourier transformed infrared spectroscopy, and X-ray photoelectron spectroscopy. Moreover, the degradability, bioactivity, biocompatibility, and osteoconductivity of n-ACP-cit/PAA composite were evaluated in vitro and in vivo, using simulated body fluid (SBF) solution soaking test, mouse bone marrow mesenchymal stem cells proliferation and differentiation, morphological observation test, expression of genes associated with osteogenesis, and bone defect model repair test, respectively. The modified n-ACP-cit/PAA composite exhibited a much higher weight loss rate (36.01 wt.%) than that of PAA (23.99 wt.%) after immersing in SBF solution for 16 weeks and the pH values of local environment restored to neutral condition. Moreover, cells co-culturing with composites exhibited higher alkaline phosphatase activity, more calcium nodule-formation, and higher expression levels of osteogenic differentiation-related genes (Bmp-2, Colla I, OCN, OPN, and Runx-2) than that of PAA. Furthermore, the bone defect model repair test revealed that the composite could be intimately incorporated with the surrounding bone without causing any deleterious reaction and capable of guiding new bone formation. Together, these results indicated that the new modified bone repair n-ACP-cit/PAA composite material with specific characteristics may be designed for meeting diverse requirements from biomedical applications.

Pathotype, Resistance Classification, and Seed-Coating Control of Heterodera avenae and H. filipjevi in the North China Plain.

Heterodera avenae and H. filipjevi are cereal cyst nematodes (CCNs) that infect cereals in 16 provinces of China. CCN populations from Xuchang, Tangyin, Qihe, and Juye were tested using 23 barley, oat, and wheat entries of the International Test Assortment for Defining Cereal Cyst Nematode Pathotypes. H. avenae populations from Tangyin, Qihe, and Juye were classified as pathotype Ha91, and H. filipjevi from Xuchang was classified as a new pathotype similar to pathotype West. Among 42 other winter wheat cultivars, 29 and 30 were differentially susceptible, 13 and 12 were differentially resistant to H. avenae and H. filipjevi, respectively. Three entries were resistant to both species, and three other entries were resistant to H. avenae and moderately resistant to H. filipjevi. Coating wheat seed with abamectin + isopycnic imidacloprid or methylene (bis) thiocyanate + thiamethoxam reduced the number of H. avenae and H. filipjevi cysts by 46 to 56%, increased wheat yield by 9 to 27%, and improved net income by 660 to 2,640 Chinese Yuan ha-1, respectively. Resistant wheat cultivars are scarce in China, and seed coating is considered the most suitable method for controlling CCNs in the North China Plain, where crop rotation cannot be practiced.

First record of Heterodera elachista infecting rice in Henan Province of central China.

From June 2018 to November 2019, a survey for cyst-forming nematodes was conducted in rice fields in Henan Province of central China. Cysts were recovered from two rice fields (N32° 14' 048″8 and E115° 4' 008″) at Huangchuan County, leading to more intensive sampling. A further 25 soil samples were then collected with a valve bag from each of these two locations. Cysts and second-stage juveniles (J2) were recovered from roots and soil following Cobb's gravity sieving method. Live cysts were detected in all soil samples with a mean of 6.7±1.5 cysts per 100 ml of soil. Morphologically, the cysts were spherical to lemon-shaped, light to dark brown in color with subcrystalline layer. The vulval cone was well developed, cone terminus with a few large, peripheral, dark brown bullae lacking finger-like projections, and the ambifenestrae were almost rounded with two semifenestrae; width and length of the semifenestrae were similar. The vulval bridge was narrow, with a medium sized underbridge. Cyst measurements (n = 8) determined a mean body length of 431.1 ± 47.23 (351.0 - 516.0) µm, body width 304.3 ± 47.40 (240.0 - 381.0) µm; body length to width ratio 1.42 ± 0.10 (1.2 to 1.6); fenestrae length 39.4 ± 7.06 (26.0 - 47.0) µm; fenestrae width 36.5 ± 5.96 (25.0 - 43.0) µm; vulva slit length 37.1 ± 3.62 (30.0 - 42.0) µm; and the mean underbridge length 75.0 ± 3.39 (70.0 - 81.0) µm. Morphometric J2 measurements (n = 10) included a body length of 432.3 ± 53.26 (379.0 - 512.0) µm; stylet length 20.8 ± 1.87 (18.0 - 24) µm with rounded knobs; tail length 63.1 ± 7.92 (52.0 - 75.0) µm with a hyaline terminal tail length of 35.8 ± 6.14 (28.0 - 45.0) µm. The key morphometrics of this isolate were intermediate to those of the Japanese isolates (Nobbs et al. 1992.) and Chinese isolates (Ding et al. 2012), and other morphological character values were within the range of those reported for Heterodera elachista (Nobbs et al. 1992; Tanha Maafi et al. 2003). Amplification of DNA from single cysts (n = 7) was conducted using the protocol described by Ding et al. (2012). rDNA - ITS sequences were amplified with the universal primers TW81 and AB28 (Joyce et al. 1994). The PCR product was purified and sequenced. The ITS sequences were submitted to GenBank under accession numbers MT579616. Comparisons showed a sequence identity of more than 99.9% for H. elachista sequence MN720080 from Korea and 99.5% for H. elachista sequences JN864884 and JN202916 from China. Species identification was also confirmed using sequence characterized amplified region (SCAR) methods with H. elachista-specific primers He-F/He-R (Qi, 2012). An expected PCR fragment of approximately 434 bp was obtained, which was consistent with those previously reported for H. elachista. Pathogenicity was confirmed by infection and reproduction on rice (Oryza sativa cv. 'Nipponbare'). Seeds were sown into three tubes containing 150 ml of a sterile soil mixture (loamy soil: sand = 1:1), each with 5 cysts (mean of 185 eggs/cyst) and cultivated in an artificial climate box at 25/30°C, under a 12-h dark/12-h light cycle. Three other tubes without cysts were set as control. Two weeks after sowing, stunting and reduction of leaf length were observed and third- and fourth-stage juveniles were observed in roots stained with acid fuchsin. On average, 142 cysts per 150 ml soil were recovered at 5 weeks after sowing. The newly formed cysts corresponded morphologically and molecularly to the cysts from the original soil samples. The globally recognized and economically important rice-damaging cyst nematodes include H. oryzae, H. oryzicola, H. elachista, H. sacchari and H. graminophila (Zhuo et al. 2014). Ohshima (1974) first reported H. elachista, which was originally recorded as H. oryzae in Japan by Luc and Brizuela (1961). H. elachista was then detected from a rice field at Mazandaran Province in Iran (Tanha Maafi et al., 2003), and in upland rice fields in Hunan (Ding et al., 2012) and Guangxi, China (Zhuo et al. 2014). To the best of our knowledge, this is the first report of H. elachista as a pathogen on rice in Henan Province, in central China. According to our field observations, H. elachista was much more serious in direct-seeded rice field than in the transplanted rice fields. H. elachista was also reported attacking corn (Xiao et al., 2019). Henan is the most important corn-producing province in China, thus H. elachista is a potential threat to corn production in Henan. Our findings will be very beneficial for H. elachista management and further research on direct-seeded rice and corn in Henan Province, central China.

Enhancement of osteoblast cells osteogenic differentiation and bone regeneration by hydroxyapatite/phosphoester modified poly(amino acid).

Hydroxyapatite/poly(amino acid) (HA/PAA) has been used to treat a variety of long bone and vertebral bony defects, and a further biocompatibility improvement is a key for better application. Phosphoester (PE) contained materials are highly biocompatible but could hardly treat massive bone defects due to its fast-degradation-derived mechanical instability. To address the problems of the two materials, we have incorporated PE molecule into the main chain of PAA by chemical bonding. As a result, the compressive strength of HA/PAA with 1 wt% and 2.5 wt% PE maintained in the range of 80-150 MPa after soaking in PBS for 12 weeks, which could be attributed to the amplified hydrogen-bonding inside composites. Besides, the PE-containing HA/PAAs with increased hydrophilic function groups (O=P-O bonds and O=P-N), created a more favourable surface for cell adhesion. Meanwhile, compared with HA/PAA, the PE-containing HA/PAAs had a fast minerlization speed and promoted cell osteogenic differentiation. Furthermore, the in vivo study indicated that PE-containing HA/PAAs could facilitate bone formation (4 weeks), and form a complete bone bridging (12 weeks) in a rabbit cranial bone defect. In summary, the HA/PE-m-PAAs possessed good mechanical stability, improved cytocompatibility and osteoconductivity, so the composites have a great potential for massive bone defect treatment.

Preparation, Characterization and In Vitro Biological Evaluation of a Novel Pearl Powder/Poly-Amino Acid Composite as a Potential Substitute for Bone Repair and Reconstruction.

Many studies about fabricating organic-inorganic composite materials have been carried out in order to mimic the natural structure of bone. Pearl, which has a special block-and-mortar hierarchical structure, is a superior bone repair material with high osteogenic activity, but it shows few applications in the clinical bone repair and reconstruction because of its brittle and uneasily shaped properties. In this work, pearl powder (P)/poly (amino acid) (PAA) composites were successfully prepared by a method of in situ melting polycondensation to combine the high osteogenic activity of the pearl and the pliability of the PAA. The mechanical properties, in vitro bioactivity and biocompatibility as well as osteogenic activity of the composites were investigated. The results showed that P/PAA composites have both good mechanical properties and bioactivity. The compressive strength, bending strength and tensile strength of the composites reached a maximum of 161 MPa, 50 MPa and 42 MPa, respectively; in addition, apatite particles successfully deposited on the composites surface after immersion in simulated body fluid (SBF) for 7 days indicated that P/PAA composites showed an enhanced mineralization capacity and bioactivity due to incorporation of pearl powder and PAA. The cell culture results revealed that higher cell proliferation and better adhesion morphology of mouse bone marrow mesenchymal stem cells (MSCs) appeared on the composite surface. Moreover, cells growing on the surface of the composites exhibited higher alkaline phosphatase (ALP) activity, more calcium nodule-formation, and higher expression levels of osteogenic differentiation-related genes (COL 1, RunX2, OCN, and OPN) than cells grown on PAA surface. The P/PAA composites exhibited both superior mechanical properties to the pearl powder, higher bioactivity and osteogenic capability compared with those of PAA.

Mechanics, degradability, bioactivity, in vitro, and in vivo biocompatibility evaluation of poly(amino acid)/hydroxyapatite/calcium sulfate composite for potential load-bearing bone repair.

A ternary composite of poly(amino acid), hydroxyapatite, and calcium sulfate (PAA/HA/CS) was prepared using in situ melting polycondensation method and evaluated in terms of mechanical strengths, in vitro degradability, bioactivity, as well as in vitro and in vivo biocompatibility. The results showed that the ternary composite exhibited a compressive strength of 147 MPa, a bending strength of 121 MPa, a tensile strength of 122 MPa, and a tensile modulus of 4.6 GPa. After immersion in simulated body fluid, the compressive strength of the composite decreased from 147 to 98 MPa for six weeks and the bending strength decreased from 121 to 75 MPa for eight weeks, and both of them kept stable in the following soaking period. The composite could be slowly degraded with 7.27 wt% loss of initial weight after soaking in phosphate buffered solution for three weeks when started to keep stable weight in the following days. The composite was soaked in simulated body fluid solution and the hydroxyapatite layer, as flower-like granules, formed on the surface of the composite samples, showing good bioactivity. Moreover, it was found that the composite could promote proliferation of MG-63 cells, and the cells with normal phenotype extended and spread well on the composite surface. The implantation of the composite into the ulna of sheep confirmed that the composite was biocompatible and osteoconductive in vivo, and offered the PAA/HA/CS composite promising material for load-bearing bone substitutes for clinical application.