Novel electrocatalytic capacitive deionization with catalytic electrodes for selective phosphonate degradation: Performance and mechanism.

Phosphonate is becoming a global interest and concern owing to its environment risk and potential value. Degradation of phosphonate into phosphate followed by the recovery is regarded as a promising strategy to control phosphonate pollution, relieve phosphorus crisis, and promote phosphorus cycle. Given these objectives, an anion-membrane-coated-electrode (A-MCE) doped with Fe-Co based carbon catalyst and cation-membrane-coated-electrode (C-MCE) doped with carbon-based catalyst were prepared as catalytic electrodes, and a novel electrocatalytic capacitive deionization (E-CDI) was developed. During charging process, phosphonate was enriched around A-MCE surface based on electrostatic attraction, ligand exchange, and hydrogen bond. Meanwhile, Fe2+ and Co2+ were self-oxidized into Fe3+ and Co3+, forming a complex with enriched phosphonate and enabling an intramolecular electron transfer process for phosphonate degradation. Additionally, benefiting from the stable dissolved oxygen and high oxygen reduction reaction activity of C-MCE, hydrogen peroxide accumulated in E-CDI (158 µM) and thus hydroxyl radicals (·OH) were generated by activation. E-CDI provided an ideal platform for the effective reaction between ·OH and phosphonate, avoiding the loss of ·OH and triggering selective degradation of most phosphonate. After charging for 70 min, approximately 89.9% of phosphonate was degraded into phosphate, and phosphate was subsequently adsorbed by A-MCE. Results also showed that phosphonate degradation was highly dependent on solution pH and voltage, and was insignificantly affected by electrolyte concentration. Compared to traditional advanced oxidation processes, E-CDI exhibited a higher degradation efficiency, lower cost, and less sensitive to co-existed ions in treating simulated wastewaters. Self-enhanced and selective degradation of phosphonate, and in-situ phosphate adsorption were simultaneously achieved for the first time by a E-CDI system, showing high promise in treating organic-containing saline wastewaters.

Patterned dense Janus membranes with simultaneously robust fouling, wetting and scaling resistance for membrane distillation.

Membrane fouling, wetting and scaling are three prominent challenges that severely hinder the practical applications of membrane distillation (MD). Herein, polyamide/polyvinylidene fluoride (PA/PVDF) Janus membrane comprising a hydrophobic PVDF substrate and a patterned dense PA layer by reverse interfacial polymerization (R-IP) was developed. Direct contact MD experiments demonstrated that PA/PVDF Janus membrane could exhibit simultaneously superior resistance towards surfactant-induced wetting, oil-induced fouling and gypsum-induced scaling without compromising flux. Importantly, the size-sieving effect, rather than the breakthrough pressure of the membrane, was revealed as the critical factor that probably endowed its resistance to wetting. Furthermore, a unique possible anti-scaling mechanism was unveiled. The superhydrophilic patterned dense PA layer with strong salt rejection capability not only prevented scale-precursor ions from intruding the substrate but also resulted in the high surface interfacial energy that inhibited the adhesion and growth of gypsum on the membrane surface, while its relatively low surface -COOH density benefited from R-IP process further ensured the membrane with a low scaling propensity. This study shall provide new insights and novel strategies in designing high-performance MD membranes and enable robust applications of MD facing the challenges of membrane fouling, wetting and scaling.

Time-dependent hormetic effects of polypeptide antibiotics and two antibacterial agents contribute to time-dependent cross-phenomena of their binary mixtures.

Polypeptide antibiotics (PPAs), silver nanoparticles (plural) (AgNP) and quorum sensing inhibitors (QSIs) are considered to be the ideal antibiotic substitutes. Due to the great potential for the combined use of these antibacterial agents, it is necessary to evaluate their joint effects. In this study, the joint toxic actions for the binary mixtures of PPA + PPA, PPA + AgNP, and PPA + QSI were judged via the independent action (IA) model based on the individual and combined toxicity of test agents to the bioluminescence of Aliivibrio fischeri during 24 h. It was observed that the single agents (PPAs, AgNP, and QSI) and the binary mixtures (PPA + PPA, PPA + AgNP, and PPA + QSI) all triggered the time-dependent hormetic effects on the bioluminescence, where the maximum stimulatory rate, the median effective concentration, and the occurrence of hormesis varied with the increase of time. While bacitracin triggered the maximum stimulatory rate (266.98 % at 8 h) among the single agents, the mixture of capreomycin sulfate and 2-Pyrrolidinone induced the maximum stimulatory rate (262.21 % at 4 h) among the binary mixtures. The cross-phenomenon that the dose-response curve of mixture crossed the corresponding IA curve was observed in all treatments, which also varied with time, exhibiting that the joint toxic actions and corresponding intensities possessed dose- and time-dependent features. Furthermore, three kinds of binary mixtures resulted in three different variation tendencies for the time-dependent cross-phenomena. Mechanistic speculation indicated that test agents possessed the stimulatory modes of action (MOAs) at low-dose and inhibitory MOAs at high-dose to induce the hormetic effects, and the interplays between these MOAs varied with time to trigger the time-dependent cross-phenomenon. This study provides the reference data for the joint effects of PPAs and typical antibacterial agents, which will benefit the application of hormesis in the exploration of time-dependent cross-phenomenon and promote the future development of environmental risk assessment of pollutant mixtures.

Anti-Wetting Performance of an Electrospun PVDF/PVP Membrane Modified by Solvothermal Treatment in Membrane Distillation.

Membrane distillation (MD) is attractive for water reclamation due to the fact of its unique characteristics. However, membrane wetting becomes an obstacle to its further application. In this paper, a novel hydrophobic polyvinylidene fluoride/poly(vinyl pyrrolidone) (PVDF/PVP) membrane was fabricated by electrospinning and solvothermal treatment. The electrospun membranes prepared by electrospinning showed a multilevel interconnected nanofibrous structure. Then, a solvothermal treatment introduced the micro/nanostructure to the membrane with high roughness (Ra = 598 nm), thereby the water contact angle of the membrane increased to 158.3 ± 2.2°. Owing to the superior hydrophobicity, the membrane presented high resistance to wetting in both NaCl and SDS solutions. Compared to the pristine PVDF membrane, which showed wetting with a flux decline (120 min for 0.05 mM surfactant solution treatment), the prepared membrane showed outstanding stability over 600 min, even in 0.2 mM surfactant solutions. These results confirm a simple method for anti-wetting hydrophobic membrane preparation, which presented universal significance to direct contact membrane distillation (DCMD) for industrial application.

Dual-layer Janus charged nanofiltration membranes constructed by sequential electrospray polymerization for efficient water softening.

The separation of hardness ions such as calcium and magnesium from hard water can improve water quality, which is important but technically challenging. Nanofiltration (NF) has attracted much attention because of its efficiency, environmental friendliness and low cost. However, common NF membranes with a singly (either positively or negatively) charged layer have insufficient water softening capacity. In this work, two types of dual-layer Janus charged polyamide NF membranes composed of oppositely charged inner and outer layers were developed for the first time by sequential electrospray polymerization strategy for efficient water softening. The effect of the microstructure of the dually charged barrier layer on the separation performance of divalent salt ions was explored. Detailed mechanistic studies revealed that the microstructure of the outer layer of the barrier layer played a crucial role in the ion separation of the Janus membrane due to its control of the reverse transport of ions. Janus charged polyamide NF membrane with a loose outer layer exhibited better water softening performance (93.6% of hardness removed) compared to the singly charged NF membranes due to the simultaneous dual electrostatic effect and no ion reverse transport confinement. This Janus charged NF membrane also possessed good antifouling performance, mainly due to its negatively charged outer layers. The mechanistic insights gained in this study reveal the huge potential of microstructural design toward high-performance Janus charged NF membranes, and provide important guidance on the future development of high-efficiency water softening NF membranes.

Ionic resource recovery for carbon neutral papermaking wastewater reclamation by a chemical self-sufficiency zero liquid discharge system.

Papermaking industry discharges large quantities of wastewater and waste gas, whose treatment is limited by extra chemicals requirements, insufficient resource recovery and high energy consumption. Herein, a chemical self-sufficiency zero liquid discharge (ZLD) system, which integrates nanofiltration, bipolar membrane electrodialysis and membrane contactor (NF-BMED-MC), is designed for the resource recovery from wastewater and waste gas. The key features of this system include: 1) recovery of NaCl from pretreated papermaking wastewater by NF, 2) HCl/NaOH generation and fresh water recovery by BMED, and 3) CO2 capture and NaOH/Na2CO3 generation by MC. This integrated system shows great synergy. By precipitating hardness ions in papermaking wastewater and NF concentrate with NaOH/Na2CO3, the inorganic scaling on NF membrane is mitigated. Moreover, the NF-BMED-MC system with high stability can simultaneously achieve efficient CO2 removal and sustainable recovery of fresh water and high-purity resources (NaCl, Na2SO4, NaOH and HCl) from wastewater and waste gas without introducing any extra chemicals. The environmental evaluation indicates the carbon-neutral papermaking wastewater reclamation can be achieved through the application of NF-BMED-MC system. This study establishes the promising of NF-BMED-MC as a sustainable alternative to current membrane methods for ZLD of papermaking industry discharges treatment.

Recovery of Fluoride-Rich and Silica-Rich Wastewaters as Valuable Resources: A Resource Capture Ultrafiltration-Bipolar Membrane Electrodialysis-Based Closed-Loop Process.

Traditional technologies such as precipitation and coagulation have been adopted for fluoride-rich and silica-rich wastewater treatment, respectively, but waste solid generation and low wastewater processing efficiency are still the looming concern. Efficient resource recovery technologies for different wastewater treatments are scarce for environment and industry sustainability. Herein, a resource capture ultrafiltration-bipolar membrane electrodialysis (RCUF-BMED) system was designed into a closed-loop process for simultaneous capture and recovery of fluoride and silica as sodium silicofluoride (Na2SiF6) from mixed fluoride-rich and silica-rich wastewaters, as well as achieving zero liquid discharge. This RCUF-BMED system comprised two key parts: (1) capture of fluoride and silica from two wastewaters using acid, and recovery of the Na2SiF6 using base by UF and (2) UF permeate conversion for acid/base and freshwater generation by BMED. With the optimized RCUF-BMED system, fluoride and silica can be selectively captured from wastewater with removal efficiencies higher than 99%. The Na2SiF6 recovery was around 72% with a high purity of 99.1%. The aging and cyclic experiments demonstrated the high stability and recyclability of the RCUF-BMED system. This RCUF-BMED system has successfully achieved the conversion of toxic fluoride and silica into valuable Na2SiF6 from mixed wastewaters, which shows great application potential in the industry-resource-environment nexus.

How do intestinal probiotics restore the intestinal barrier?

The intestinal barrier is a structure that prevents harmful substances, such as bacteria and endotoxins, from penetrating the intestinal wall and entering human tissues, organs, and microcirculation. It can separate colonizing microbes from systemic tissues and prevent the invasion of pathogenic bacteria. Pathological conditions such as shock, trauma, stress, and inflammation damage the intestinal barrier to varying degrees, aggravating the primary disease. Intestinal probiotics are a type of active microorganisms beneficial to the health of the host and an essential element of human health. Reportedly, intestinal probiotics can affect the renewal of intestinal epithelial cells, and also make cell connections closer, increase the production of tight junction proteins and mucins, promote the development of the immune system, regulate the release of intestinal antimicrobial peptides, compete with pathogenic bacteria for nutrients and living space, and interact with the host and intestinal commensal flora to restore the intestinal barrier. In this review, we provide a comprehensive overview of how intestinal probiotics restore the intestinal barrier to provide new ideas for treating intestinal injury-related diseases.

Effect of aniline and antimony on anaerobic-anoxic-oxic system with novel amidoxime-modified polyacrylonitrile adsorbent for wastewater treatment.

There has been increasing concern over the mixed discharge of municipal-textile composite wastewater, which remains challenging for typical wastewater treatment plant (WWTP) using anaerobic-anoxic-oxic process (AAO). Highly-toxic aniline and antimony, typical co-contaminants in textile wastewater, usually lead to increased chemical oxygen demand (COD) in influent and deteriorated effluent quality. Amidoxime-modified polyacrylonitrile (amPAN) adsorbent was prepared and added to adsorb antimony and facilitate substrate removal. With amPAN dosage at 6.0 g L-1 in oxic bioreactor, 64.2 ± 5.6% of antimony was removed from influent. Extracellular polymeric substance release was simultaneously changed with residual antimony concentration. Meanwhile, amPAN promoted the proliferation of Proteobacteria, Bacteroidetes and Epsilonbacteraeota serving as microorganism carrier. As a result, removal efficiencies of COD (94.4 ± 0.6%), ammonium (NH4+-N, 92.6 ± 3.3%), total nitrogen (TN, 76.4 ± 6.3%) and total phosphorus (TP, 93.4 ± 2.1%) were enhanced to meet Class 1A discharge standard in China. These results indicate that AAO with amPAN is promising for municipal-textile composite wastewater treatment.

Restricted fiber contraction during amidoximation process for reinforced-concrete structured nanofiber sphere with superior Sb(V) adsorption capacity.

Amidoxime-polyacrylonitrile (APAN) nanofiber possesses advantages of adsorbing heavy metals for abundant amidoxime groups. However, it easily suffers from poor mechanical property caused by fiber contraction during amidoximation process. Inspired by high mechanical strength of reinforced concrete, we embedded stiff polylactic acid (PLA) skeletons into PAN matrix to prepare reinforced-concrete structured nanofiber sphere (APAN/PLA NFS) through solution blending. Preparation parameters including polymer concentration and PAN/PLA ratio were optimized as 4.0% and 1:1, and coarse sphere surface, numerous mesopores and large pore volume (19.3 mL/g) were endowed. Scanning electron microscope results showed restricted fiber contraction with nitrile conversion of 58.1%. APAN/PLA NFS showed robust compressive strength of 3.28 MPa with strain of 80%, and X-ray diffraction and differential scanning calorimeter analysis revealed that crystalline PLA reinforced non-crystalline PAN through molecule-level compatibility. Compared with plain APAN sphere, Sb(V) adsorption from water for APAN/PLA NFS showed better performance with superhigh capacity of 949.7 mg/g and fast rate (equilibrium time of 2 h), which was owing to abundant mesopores preserved by PLA skeletons. These findings indicated that PLA was a promising skeletal candidate which could protect APAN from fiber contraction during amidoximation process and could strongly expand adsorption capacity of APAN for heavy metals.

Effect of Helicobacter Pylori on Plasma Metabolic Phenotype in Patients With Gastric Cancer.

BACKGROUND: Although Helicobacter pylori (Hp) as high risk factor for gastric cancer have been investigated from human trial, present data is inadequate to explain the effect of Hp on the changes of metabolic phenotype of gastric cancer in different stages. PURPOSE: Herein, plasma of human superficial gastritis (Hp negative and positive), early gastric cancer and advanced gastric cancer analyzed by UPLC-HDMS metabolomics can not only reveal metabolic phenotype changes in patients with gastric cancer of different degrees (30 Hp negative, 30 Hp positive, 20 early gastric cancer patients, and 10 advanced gastric cancer patients), but also auxiliarily diagnose gastric cancer. RESULTS: Combined with multivariate statistical analysis, the results represented biomarkers different from Hp negative, Hp positive, and the alterations of metabolic phenotype of gastric cancer patients. Forty-three metabolites are involved in amino acid metabolism, and lipid and fatty acid metabolism pathways in the process of cancer occurrence, especially 2 biomarkers glycerophosphocholine and neopterin, were screened in this study. Neopterin was consistently increased with gastric cancer progression and glycerophosphocholine tended to consistently decrease from Hp negative to advanced gastric cancer. CONCLUSION: This method could be used for the development of rapid targeted methods for biomarker identification and a potential diagnosis of gastric cancer.

Intestinal Flora as a Potential Strategy to Fight SARS-CoV-2 Infection.

The coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread rapidly worldwide, seriously endangering human health. In addition to the typical symptoms of pulmonary infection, patients with COVID-19 have been reported to have gastrointestinal symptoms and/or intestinal flora dysbiosis. It is known that a healthy intestinal flora is closely related to the maintenance of pulmonary and systemic health by regulating the host immune homeostasis. Role of the "gut-lung axis" has also been well-articulated. This review provides a novel suggestion that intestinal flora may be one of the mediators of the gastrointestinal responses and abnormal immune responses in hosts caused by SARS-CoV-2; improving the composition of intestinal flora and the proportion of its metabolites through probiotics, and personalized diet could be a potential strategy to prevent and treat COVID-19. More clinical and evidence-based medical trials may be initiated to determine the strategy.

Adsorption of antimonite and antimonate from aqueous solution using modified polyacrylonitrile with an ultrahigh percentage of amidoxime groups.

Porous modified polyacrylonitrile (PAN) with an ultrahigh percentage of amidoxime groups (UAPAN) was synthesized for the first time and used to adsorb antimonite (Sb(III)) and antimonate (Sb(V)) from aqueous solution. Fourier transform infrared (FT-IR), Zeta potential, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) were adopted to characterize UAPAN and explore adsorption mechanism. Moreover, batch experiments were performed to investigate the influence of various adsorption parameters, including initial pH, contact time, temperature, coexisting ions and reusability on adsorption capacities. Results showed that the maximum adsorption capacities for Sb(III) and Sb(V) were 125.4 and 177.3 mg g-1, respectively, which were much higher than those of other adsorbents reported in literature. The adsorption thermodynamics was evaluated, indicating the spontaneous and endothermic adsorption. The adsorption isotherm was suitable to be modeled by Langmuir isotherm (R2 > 0.96). Results of FT-IR, Zeta potential and XPS indicated that adsorption was involved with electric charge attraction and ligand exchange. DFT further explained that better adsorption of Sb(V) on UAPAN than that of Sb(III) was caused by the higher adsorption energy, more favorable bond lengths and atom charge density. Accordingly, UAPAN is expected to be a compelling candidate for antimony decontamination from aqueous environment.

Plasma microRNAs as potential new biomarkers for early detection of early gastric cancer.

BACKGROUND: Early gastric cancer (EGC), compared with advanced gastric cancer (AGC), has a higher 5-year survival rate. However, due to the lack of typical symptoms and the difficulty in diagnosing EGC, no effective biomarkers exist for the detection of EGC, and gastroscopy is the only detection method. AIM: To provide new biomarkers with high specificity and sensitivity through analyzed the differentially expressed microRNAs (miRNAs) in EGC and AGC and compared them with those in benign gastritis (BG). METHODS: We examined the differentially expressed miRNAs in the plasma of 30 patients with EGC, AGC, and BG by miRNA chip analysis. Then, we analyzed and selected the significantly different miRNAs using bioinformatics. Reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) confirmed the relative transcription level of these miRNAs in another 122 patients, including patients with EGC, AGC, Helicobacter pylori (H. pylori)-negative gastritis (Control-1), and H. pylori-positive atrophic gastritis (Control-2). To establish a diagnostic model for the detection of plasma miRNA in EGC, we chose miRNAs that can be used to determine EGC and AGC from Control-1 and Control-2 and miRNAs in EGC from all other groups. RESULTS: Among the expression profiles of the miRNA chips in the three groups in the discovery set, of 117 aberrantly expressed miRNAs, 30 confirmed target prediction, whereas 14 were included as potential miRNAs. The RT-qPCR results showed that 14 potential miRNAs expression profiles in the two groups exhibited no differences in terms of H. pylori-negative gastritis (Control-1) and H. pylori-positive atrophic gastritis (Control-2). Hence, these two groups were incorporated into the Control group. A combination of four types of miRNAs, miR-7641, miR-425-5p, miR-1180-3p and miR-122-5p, were used to effectively distinguish the Cancer group (EGC + AGC) from the Control group [area under the curve (AUC) = 0.799, 95% confidence interval (CI): 0.691-0.908, P < 0.001]. Additionally, miR-425-5p, miR-24-3p, miR-1180-3p and miR-122-5p were utilized to distinguish EGC from the Control group (AUC = 0.829, 95%CI: 0.657-1.000, P = 0.001). Moreover, the miR-24-3p expression level in EGC was lower than that in the AGC (AUC = 0.782, 95%CI: 0.571-0.993, P = 0.029), and the miR-4632-5p expression level in EGC was significantly higher than that in AGC (AUC = 0.791, 95%CI: 0.574-1.000, P = 0.024). CONCLUSION: The differentially expressed circulatory plasma miR-425-5p, miR-1180-3p, miR-122-5p, miR-24-3p and miR-4632-5p can be regarded as a new potential biomarker panel for the diagnosis of EGC. The prediction and early diagnosis of EGC can be considerably facilitated by combining gastroscopy with the use of these miRNA biomarkers, thereby optimizing the strategy for effective detection of EGC. Nevertheless, larger-scale human experiments are still required to confirm our findings.

Occurrence, impact variables and potential risk of PPCPs and pesticides in a drinking water reservoir and related drinking water treatment plants in the Yangtze Estuary.

PPCPs and pesticides have been documented throughout the world over the years, yet relatively little is known about the factors affecting their spatial distribution and temporal change in order to know their potential risk to the ecosystem or human health in the future. In our study, 5 PPCPs and 9 pesticides were selected to study their occurrence, impact variables and potential risk in a drinking water reservoir in Yangtze Estuary and related drinking water treatment plants (DWTPs) in China. The detection results showed the presence of PPCPs and pesticides reflected in a large part of croplands and urban and built-up land in the adjacent basin. The discrepancy of concentration among the different PPCPs and pesticides was mainly decided by their application amount or daily usage. Then, the major factors regulating the occurrence of these contaminants in the surface water were found as the living expenditure attributed to food and medicine based on a correlation analysis. Also, the PPCPs were found to negatively correlate to the effectiveness of sewage management. The detection of the PPCPs and pesticides in DWTPs indicated that, except for atrazine and simazine, the removal percentages were increased significantly in advanced DWTPs. Moreover, risk assessment estimated by a Risk Quotient and Hazard Quotient showed that while caffeine, bisphenol A, estrone and simazine were at a high-risk level in the reservoir water, all of the contaminants detected posed no risk to human health through drinking water. It's possible that atrazine could pose a high risk to the ecosystem while simazine could pose a risk to human health in the future considering the increasing expenditure attributed to food.

Phenol separation from phenol-laden saline wastewater by membrane aromatic recovery system-like membrane contactor using superhydrophobic/organophilic electrospun PDMS/PMMA membrane.

Phenol recovery from phenol-laden saline wastewater plays an important role in the waste reclamation and pollution control. A membrane aromatic recovery system-like membrane contactor (MARS-like membrane contactor) was set up in this study using electrospun polydimethylsiloxane/polymethyl methacrylate (PDMS/PMMA) membrane with 0.0048 m2 effective area to separate phenol from saline wastewater. Phenol and water contact angles of 0° and 162° were achieved on this membrane surface simultaneously, indicating its potential in the separation of phenol and water-soluble salt. Feed solution (500 mL) of 0.90 L/h and receiving solution (500 mL) of 1.26 L/h were investigated to be the optimum conditions for phenol separation, which corresponds to the employed Reynolds number of 14.6 and 20.5. During 108-h continuous separation for feed solution (2.0 g/L phenol, 10.0 g/L NaCl) under room temperature (20 °C), 42.6% of phenol was recycled in receiving solution with a salt rejection of 99.95%. Meanwhile, the mean phenol mass transfer coefficient (Kov) was 6.7 × 10-7 m s-1. As a membrane-based process, though the permeated phenol increased with the increase of phenol concentration in feed solution, the phenol recovery ratio was determined by the membrane properties rather than the pollutant concentrations. Phenol was found to permeate this membrane via adsorption, diffusion and desorption, and therefore, the membrane fouling generated from pore blockage in other membrane separation processes was totally avoided.

Microbial dynamics of biofilm and suspended flocs in anammox membrane bioreactor: The effect of non-woven fabric membrane.

Membrane bioreactor with non-woven fabric membranes (NWMBR) is developing into a suitable method for anaerobic ammonium oxidation (anammox). As a carrier, non-woven fabric membrane divided total biomass into biofilm and suspended flocs gradually. Total nitrogen removal efficiency was maintained around 82.6% under nitrogen loading rate of 567.4mgN/L/d after 260days operation. Second-order substrate removal and Stover-Kincannon models were successfully used to simulate the nitrogen removal performance in NWMBR. High-throughput sequence was employed to elucidate the underlying microbial community dynamics. Candidatus Brocadia, Kuenenia, Jettenia were detected to affirm the dominant status of anammox microorganisms and 98.2% of anammox microorganisms distributed in biofilm. In addition, abundances of functional genes (hzs, nirK) in biofilm and suspended flocs were assessed by quantitative PCR to further investigate the coexistence of anammox and other microorganisms. Potential nitrogen removal pathways were established according to relevant nitrogen removal performance and microbial community.

Employing a novel O3/H2O2 + BiPO4/UV synergy technique to deal with thiourea-containing photovoltaic wastewater.

Photovoltaic wastewater contains a large amount of thiourea that cannot be directly treated by biological methods because of its biotoxicity. In this study, a novel O3/H2O2 + BiPO4/UV synergy technique was used as a pre-treatment process to degrade thiourea. The effects of H2O2 and catalyst loading were investigated, and the transformation pathway of thiourea was predicted based on the intermediates detected by UPLC-Vion-IMS-QToF. The synergy technique degraded 89.14% thiourea within only 30 min, and complete degradation occurred after 150 min. The TOC removal of O3/H2O2 + BiPO4/UV was 1.8, 1.5, and 1.9 times that of O3/H2O2 and BiPO4/UV/H2O2 single processes and O3/H2O2 + UV process, respectively, which was due to the synergy between H2O2 residues and BiPO4. In addition, thiourea was mainly degraded by ·OH into thiourea dioxide and melamine (polymerized by other intermediates) and then further degraded into biuret and methyl carbamate by the holes of BiPO4, followed by complete mineralization into H2O and CO2. These results confirm that the O3/H2O2 + BiPO4/UV synergy technique is a promising option for the degradation of thiourea.

Bacterial community evolutions driven by organic matter and powder activated carbon in simultaneous anammox and denitrification (SAD) process.

A distinct shift of bacterial community driven by organic matter (OM) and powder activated carbon (PAC) was discovered in the simultaneous anammox and denitrification (SAD) process which was operated in an anti-fouling submerged anaerobic membrane bio-reactor. Based on anammox performance, optimal OM dose (50 mg/L) was advised to start up SAD process successfully. The results of qPCR and high throughput sequencing analysis indicated that OM played a key role in microbial community evolutions, impelling denitrifiers to challenge anammox's dominance. The addition of PAC not only mitigated the membrane fouling, but also stimulated the enrichment of denitrifiers, accounting for the predominant phylum changing from Planctomycetes to Proteobacteria in SAD process. Functional genes forecasts based on KEGG database and COG database showed that the expressions of full denitrification functional genes were highly promoted in RC, which demonstrated the enhanced full denitrification pathway driven by OM and PAC under low COD/N value (0.11).

Phenol biodegradation and microbial community dynamics in extractive membrane bioreactor (EMBR) for phenol-laden saline wastewater.

An extractive membrane bioreactor (EMBR) for phenol-laden saline wastewater was set up in this study to investigate the variations of phenol removal, extracellular polymeric substance (EPS) release and microbial community dynamics. The gradual release of phenol and the total separation of salt were achieved by silicon rubber tube membrane. Only phenol (55.6-273.9mg/L) was extracted into microorganism unit from wastewaters containing 1.0-5.0g/L phenol and 35.0g/L NaCl. After 82d of EMBR operation, maximal 273.9mg/L of phenol was removed in EMBR. Low concentration of phenol in wastewater (2.5g/L) played a favorable effect on the microbial community structure, community and dynamics. The enumeration of Proteobacteria (30,499 sequences) significantly increased with more released EPS (82.82mg/gSS) to absorb and degrade phenol, compared to the virgin data without phenol addition. However, high concentration of phenol showed adverse effects on EPS release, microbial abundance and biodiversity.