Deciphering the roles of nitrogen source in sharping synchronous metabolic pathways of linear alkylbenzene sulfonate and nitrogen in a membrane biofilm for treating greywater.

Nitrogen (N) source is an important factor affecting biological wastewater treatment. Although the oxygen-based membrane biofilm showed excellent greywater treatment performance, how N source impacts the synchronous removal of organics and N is still unclear. In this work, how N species (urea, nitrate and ammonia) affect synchronous metabolic pathways of organics and N were evaluated during greywater treatment in the membrane biofilm. Urea and ammonia achieved efficient chemical oxygen demand (>97.5%) and linear alkylbenzene sulfonate (LAS, >98.5%) removal, but nitrate enabled the maximum total N removal (80.8 ± 2.6%). The nitrate-added system had poor LAS removal ratio and high residual LAS, promoting the accumulation of effluent protein-like organics and fulvic acid matter. N source significantly induced bacterial community succession, and the increasing of corresponded functional flora can promote the transformation and utilization of microbial-mediated N. The nitrate system was more conducive to the accumulation of denitrification related microorganisms and enzymes, enabling the efficient N removal. Combining with high amount of ammonia monooxygenase that contributing to LAS and N co-metabolism, LAS mineralization related microbes and functional enzymes were generously accumulated in the urea and ammonia systems, which achieved the high efficiency of organics and LAS removal.

Psychosocial factors affect the occurrence of nonsuicidal self-injury in adolescents with major depressive disorder through chain mediation.

In the adolescent group, about half of adolescents with major depressive disorder (MDD) have NSSI. Psychosocial factors are associated with the development of NSSI. Clarifying the relationship between psychosocial factors and NSSI in adolescents with MDD can help us achieve early prevent. Demographic data, Hamilton Depression Scale-24 (HAMA24), childhood trauma questionnaire, emotional intelligence scale and interpersonal reactivity index were collected from 187 adolescents with MDD. Use ANOVA, Chi-square test, Binary Logistic Regression, Pearson correlation analysis, Mediation effect analysis and the Structural Equation Model for data analysis. The results of ANOVA showed that there was significant difference between the two groups in HAMD24 total score, impulsiveness, emotional intelligence, and empathy (p < 0.05). In the regression analysis, women, depression degree, motor impulsiveness (MI), personal distress (PD) and appraisal of other's emotions empathy were the risk factors for MDD adolescents to produce NSSI behavior. Among the indicators that were significantly related to MDD and NSSI, MI and PD mediate the relationship between MDD and NSSI. The structural equation model showed that MDD, PD and MI had a direct impact on NSSI, but PD and MI had multiple intermediary effected in the relationship between MDD and NSSI. Emotional intelligence, emotional neglect and cognitive impulsiveness indirectly affected the occurrence of NSSI behavior. Impulsiveness, personal distress, emotional neglect, and emotional intelligence are important risk factors that affect NSSI behavior in adolescents with MDD, and they affect the occurrence of NSSI in adolescents with MDD through chain mediation.

Dihydropyridopyrazine Functionalized Xanthene: Generating Stable NIR Dyes with Small-Molecular Weight by Enhanced Charge Separation.

Near-infrared region (NIR; 650-1700 nm) dyes offer many advantages over traditional dyes with absorption and emission in the visible region. However, developing new NIR dyes, especially organic dyes with long wavelengths, small molecular weight, and excellent stability and biocompatibility, is still quite challenging. Herein, we present a general method to enhance the absorption and emission wavelengths of traditional fluorophores by simply appending a charge separation structure, dihydropyridopyrazine. These novel NIR dyes not only exhibited greatly redshifted wavelengths compared to their parent dyes, but also displayed a small molecular weight increase together with retained stability and biocompatibility. Specifically, dye NIR-OX, a dihydropyridopyra-zine derivative of oxazine with a molecular mass of 386.2 Da, exhibited an absorption at 822 nm and an emission extending to 1200 nm, making it one of the smallest molecular-weight NIR-II emitting dyes. Thanks to its rapid metabolism and long wave-length, NIR-OX enabled high-contrast bioimaging and assessment of cholestatic liver injury in vivo and also facilitated the evalua-tion of the efficacy of liver protection medicines against cholestatic liver injury.

All-Solution-Processed Electronics with Sub-Microscale Resolution and Nanoscale Fidelity Fabricated Via a Humidity-Controlled, Surface Energy-Directed Assembly Process.

Solution-based processes have received considerable attention in the fabrication of electronics and sensors owing to their merits of being low-cost, vacuum-free, and simple in equipment. However, the current solution-based processes either lack patterning capability or have low resolution (tens of micrometers) and low pattern fidelity in terms of line edge roughness (LER, several micrometers). Here, we present a surface energy-directed assembly (SEDA) process to fabricate metal oxide patterns with up to 2 orders of magnitude improvement in resolution (800 nm) and LER (16 nm). Experiment results show that high pattern fidelity can be achieved only at low relative humidities of below 30%. The reason for this phenomenon lies in negligible water condensation on the solution droplet. Employing the SEDA process, all-solution-processed metal oxide thin film transistors (TFTs) are fabricated by using indium oxide as channel layers, indium tin oxide as source/drain electrodes and gate electrodes, and aluminum oxide as gate dielectrics. TFT-based logic gate circuits, including NOT, NOR, NAND, and AND are fabricated as well, demonstrating the applicability of the SEDA process in fabricating large area functional electronics.

Exosome-Mediated Communication in Thyroid Cancer: Implications for Prognosis and Therapeutic Targets.

Thyroid cancer (THCA) is one of the most common malignancies of the endocrine system. Exosomes have significant value in performing molecular treatments, evaluating the diagnosis and determining tumor prognosis. Thus, the identification of exosome-related genes could be valuable for the diagnosis and potential treatment of THCA. In this study, we examined a set of exosome-related differentially expressed genes (DEGs) (BIRC5, POSTN, TGFBR1, DUSP1, BID, and FGFR2) by taking the intersection between the DEGs of the TCGA-THCA and GeneCards datasets. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses of the exosome-related DEGs indicated that these genes were involved in certain biological functions and pathways. Protein‒protein interaction (PPI), mRNA‒miRNA, and mRNA-TF interaction networks were constructed using the 6 exosome-related DEGs as hub genes. Furthermore, we analyzed the correlation between the 6 exosome-related DEGs and immune infiltration. The Genomics of Drug Sensitivity in Cancer (GDSC), the Cancer Cell Line Encyclopedia (CCLE), and the CellMiner database were used to elucidate the relationship between the exosome-related DEGs and drug sensitivity. In addition, we verified that both POSTN and BID were upregulated in papillary thyroid cancer (PTC) patients and that their expression was correlated with cancer progression. The POSTN and BID protein expression levels were further examined in THCA cell lines. These findings provide insights into exosome-related clinical trials and drug development.

Combined application of mesenchymal stem cells and different glucocorticoid dosing alleviates osteoporosis in SLE murine models.

OBJECTIVE: Bone mesenchymal stem cells (BMSCs) have been tentatively applied in the treatment of glucocorticoid-induced osteoporosis (GIOP) and systemic lupus erythematosus (SLE). However, the effects of BMSCs on osteoporosis within the context of glucocorticoid (GC) application in SLE remain unclear. Our aim was to explore the roles of BMSCs and different doses of GC interventions on osteoporosis in SLE murine models. METHODS: MRL/MpJ-Faslpr mice were divided into eight groups with BMSC treatment and different dose of GC intervention. Three-dimensional imaging analysis and hematoxylin and eosin (H&E) staining were performed to observe morphological changes. The concentrations of osteoprotegerin (OPG) and receptor activator of nuclear factor κB ligand (RANKL) in serum were measured by enzyme-linked immunosorbent assay (ELISA). The subpopulation of B cells and T cells in bone marrows and spleens were analyzed by flow cytometry. Serum cytokines and chemokines were assessed using Luminex magnetic bead technology. RESULTS: BMSCs ameliorated osteoporosis in murine SLE models by enhancing bone mass, improving bone structure, and promoting bone formation through increased bone mineral content and optimization of trabecular morphology. BMSC and GC treatments reduced the number of B cells in bone marrows, but the effect was not significant in spleens. BMSCs significantly promoted the expression of IL-10 while reducing IL-18. Moreover, BMSCs exert immunomodulatory effects by reducing Th17 expression and rectifying the Th17/Treg imbalance. CONCLUSION: BMSCs effectively alleviate osteoporosis induced by SLE itself, as well as osteoporosis resulting from SLE combined with various doses of GC therapy. The therapeutic effects of BMSCs appear to be mediated by their influence on bone marrow B cells, T cell subsets, and associated cytokines. High-dose GC treatment exerts a potent anti-inflammatory effect but may hinder the immunotherapeutic potential of BMSCs. Our research may offer valuable guidance to clinicians regarding the use of BMSC treatment in SLE and provide insights into the judicious use of GCs in clinical practice.

Microalgal extracellular polymeric substances (EPS) and their roles in cultivation, biomass harvesting, and bioproducts extraction.

Microalgae extracellular polymeric substances (EPS) are complex high-molecular-weight polymers and the physicochemical properties of EPS strongly affect the core features of microalgae cultivation and resource utilization. Revealing the key roles of EPS in microalgae life-cycle processes in an interesting and novelty topic to achieve energy-efficient practical application of microalgae. This review found that EPS showed positive effect in non-gas uptake, extracellular electron transfer, toxicity resistance and heterotrophic symbiosis, but negative impact in gas transfer and light utilization during microalgae cultivation. For biomass harvesting, EPS favored biomass flocculation and large-size cell self-flocculation, but unfavored small size microalgae self-flocculation, membrane filtration, charge neutralization and biomass dewatering. During bioproducts extraction, EPS exhibited positive impact in extractant uptake, but the opposite effect in cellular membrane permeability and cell rupture. Future research on microalgal EPS were also identified, which offer suggestions for comprehensive understanding of microalgal EPS roles in various scenarios.

Role of high-frequency ultrasound in differentiating benign and malignant skin lesions: potential and limitations.

PURPOSE: This study examined the diagnostic value of high-frequency ultrasound (HFUS) features in differentiating between benign and malignant skin lesions. METHODS: A total of 1,392 patients with 1,422 skin lesions who underwent HFUS examinations were included in an initial dataset (cohort 1) to identify features indicative of malignancy. Qualitative clinical and HFUS characteristics were recorded for all lesions. To determine which HFUS and clinical features were suggestive of malignancy, univariable and multivariable logistic regression analyses were employed. The diagnostic performance of HFUS features combined with clinical information was evaluated. This assessment was validated using internal data (cohort 2) and multicenter external data (cohort 3). RESULTS: Features significantly associated with malignancy included age above 60 years; lesion location in the head, face, and neck or genital regions; changes in macroscopic appearance; crawling or irregular growth pattern; convex or irregular base; punctate hyperechogenicity; blood flow signals; and feeding arteries. The area under the receiver operating characteristic curve, sensitivity, and specificity of HFUS features combined with clinical information were 0.946, 92.5%, and 86.9% in cohort 1; 0.870, 93.1%, and 80.8% in cohort 2 (610 lesions); and 0.864, 86.2%, and 86.6% in cohort 3 (170 lesions), respectively. However, HFUS is not suitable for evaluating lesions less than 0.1 mm in thickness or lesions exhibiting surface hyperkeratosis. CONCLUSION: In a clinical setting, the integration of HFUS with clinical information exhibited good diagnostic performance in differentiating malignant and benign skin lesions. However, its utility was limited in evaluating extremely thin lesions and those exhibiting hyperkeratosis.

Engineering a far-red fluorescent probe for rapid detection of Hg(II) ions in both cells and zebrafish.

Abnormal accumulation of mercury ions (Hg2+) in organisms can lead to severe central nervous system and other diseases. Therefore, the monitoring and detection of Hg2+ are of great significance for human health and environmental safety. Herein, we designed and synthesized a novel far-red to NIR emission fluorescent probe (Rho-Hg) based on rhodamine derivative as the fluorophore and thiospirolactone as the recognition site for turn-on detecting of Hg2+ in living cells and zebrafish. The probe Rho-Hg displayed superior sensitivity (detection limit = 17.5 nM), rapid response (<1 min), colorimetric change, high selectivity, and moderate pH stability. Leveraging this probe, we realized the real-time monitoring of Hg2+ in real samples, living cells and zebrafish. By fostering zebrafish embryos and larvae in Hg2+-containing nutrient solution, we noticed that Hg2+ was ingested into the zebrafish liver when zebrafish were grown up to 3 days old, and thus we successfully monitored the accumulation and changes of Hg2+ during zebrafish growth and development. Thus, the probe Rho-Hg could be a powerful tool for sensitive and real-time monitoring of Hg2+ in living systems.

Loss of NAT10 alleviates maternal high-fat diet-induced hepatic steatosis in male offspring of mice.

OBJECTIVE: Metabolic dysfunction-associated steatotic liver disease (MASLD) is becoming an escalating health problem in pediatric populations. This study aimed to investigate the role of N-acetyltransferase 10 (NAT10) in maternal high-fat diet (HFD)-induced MASLD in offspring at early life. METHODS: We generated male hepatocyte-specific NAT10 knockout (Nat10HKO) mice and mated them with female Nat10fl/fl mice under chow or HFD feeding. Body weight, liver histopathology, and expression of lipid metabolism-associated genes (Srebp1c, Fasn, Pparα, Cd36, Fatp2, Mttp, and Apob) were assessed in male offspring at weaning. Lipid uptake assays were performed both in vivo and in vitro. The mRNA stability assessment and RNA immunoprecipitation were performed to determine NAT10-regulated target genes. RESULTS: NAT10 deletion in hepatocytes of male offspring alleviated perinatal lipid accumulation induced by maternal HFD, decreasing expression levels of Srebp1c, Fasn, Cd36, Fatp2, Mttp, and Apob while enhancing Pparα expression. Furthermore, Nat10HKO male mice exhibited reduced lipid uptake. In vitro, NAT10 promoted lipid uptake by enhancing the mRNA stability of CD36 and FATP2. RNA immunoprecipitation assays exhibited direct interactions between NAT10 and CD36/FATP2 mRNA. CONCLUSIONS: NAT10 deletion in offspring hepatocytes ameliorates maternal HFD-induced hepatic steatosis through decreasing mRNA stability of CD36 and FATP2, highlighting NAT10 as a potential therapeutic target for pediatric MASLD.

A Large-Scale and Low-Cost Thermoacoustic Loudspeaker Based on Three-Dimensional Graphene Foam.

Graphene is a promising material for thermoacoustic sources due to its extremely low heat capacity per unit area and high thermal conductivity. However, current graphene thermoacoustic devices have limited device area and relatively high cost, which limit their applications of daily use. Here, we adopt a dip-coating method to fabricate a large-scale and cost-effective graphene sound source. This sound source has the three-dimensional (3D) porous structure that can increase the contact area between graphene and air, thus assisting heat to release into the air. In this method, polyurethane (PU) is used as a support, and graphene nanoplates are attached onto the PU skeleton so that a highly flexible graphene foam (GrF) device is obtained. At a measuring distance of 1 mm, it can emit sound at up to 70 dB under the normalized input power of 1 W. Considering its unique porous structure, we establish a thermoacoustic analysis model to simulate the acoustic performance of GrF. Furthermore, the obtained GrF can be made up to 44 in. (100 cm × 50 cm) in size, and it has good flexibility and processability, which broadens the application fields of GrF loudspeakers. It can be attached to the surfaces of objects with different shapes, making it suitable to be used as a large-area speaker in automobiles, houses, and other application scenarios, such as neck mounted speaker. In addition, it can also be widely used as a fully flexible in-ear earphone.

Rational Design of NIR-II G-Quadruplex Fluorescent Probes for Accurate In Vivo Tumor Metastasis Imaging.

Accurate in vivo imaging of G-quadruplexes (G4) is critical for understanding the emergence and progression of G4-associated diseases like cancer. However, existing in vivo G4 fluorescent probes primarily operate within the near-infrared region (NIR-I), which limits their application accuracy due to the short emission wavelength. The transition to second near-infrared (NIR-II) fluorescent imaging has been of significant interest, as it offers reduced autofluorescence and deeper tissue penetration, thereby facilitating more accurate in vivo imaging. Nonetheless, the advancement of NIR-II G4 probes has been impeded by the absence of effective probe design strategies. Herein, through a "step-by-step" rational design approach, we have successfully developed NIRG-2, the first small-molecule fluorescent probe with NIR-II emission tailored for in vivo G4 detection. Molecular docking calculations reveal that NIRG-2 forms stable hydrogen bonds and strong π-π interactions with G4 structures, which effectively inhibit twisted intramolecular charge transfer (TICT) and, thereby, selectively illuminate G4 structures. Due to its NIR-II emission (940 nm), large Stokes shift (90 nm), and high selectivity, NIRG-2 offers up to 47-fold fluorescence enhancement and a tissue imaging depth of 5 mm for in vivo G4 detection, significantly outperforming existing G4 probes. Utilizing NIRG-2, we have, for the first time, achieved high-contrast visualization of tumor metastasis through lymph nodes and precise tumor resection. Furthermore, NIRG-2 proves to be highly effective and reliable in evaluating surgical and drug treatment efficacy in cancer lymphatic metastasis models. We are optimistic that this study not only provides a crucial molecular tool for an in-depth understanding of G4-related diseases in vivo but also marks a promising strategy for the development of clinical NIR-II G4-activated probes.

Dried Blood Spots and Miniaturized Ultrasonic Nebulization Microplasma Optical Emission Spectrometry for Point-of-Care Testing of Blood Lithium.

Despite the significant importance of blood lithium (Li) detection in the treatment of bipolar disorder (BD), its point-of-care testing (POCT) remains a great challenge due to tedious sample preparation and the use of large-footprint atomic spectrometers. Herein, a system coupling dried blood spots (DBS) with a point discharge optical emission spectrometer equipped with a miniaturized ultrasonic nebulizer (MUN-µPD-OES) was developed for POCT of blood Li. Three microliters of whole blood were used to prepare a dried blood spot on a piece of filter paper to which 10 µL of eluent (1% (v/v) formic acid and 0.05% (v/v) Triton-X) was added. Subsequently, the paper was placed onto the vibrating steel membrane of the ultrasonic nebulizer and powered on to generate aerosol. The aerosol was directly introduced to the µPD-OES for quantification of Li by monitoring its atomic emission line at 670.8 nm. The proposed method minimized matrix interference caused by high levels of salts and protein. It is worth noting that the MUN suitably matches the needs of DBS sampling and can provide aerosolized introduction of Li into the assembled µPD-OES, thus eliminating all tedious sample preparation and the need for a commercial atomic spectrometer. Calibration response is linear in the therapeutic range and a limit of detection (LOD) of 1.3 µg L-1 is well below the Li minimum therapeutic concentration (2800 µg L-1). Li in mouse blood was successfully detected in real-time using MUN-µPD-OES after intraperitoneal injection of lithium carbonate, confirming that the system holds great potential for POCT of blood Li for patients with BD.

Differentiation and quantification of extracellular polymeric substances from microalgae and bacteria in the mixed culture.

Extracellular polymeric substances (EPS) play significant roles in the formation, function, and interactions of microalgal-bacteria consortia. Understanding the key roles of EPS depends on reliable extraction and quantification methods, but differentiating of EPS from microalgae versus bacteria is challenging. In this work, cation exchange resin (CER) and thermal treatments were applied for total EPS extraction from microalgal-bacteria mixed culture (MBMC), flow cytometry combined with SYTOX Green staining was applied to evaluate cell disruption during EPS extraction, and auto-fluorescence-based cell sorting (AFCS) was used to separate microalgae and bacteria in the MBMC. Thermal extraction achieved much higher EPS yield than CER, but higher temperature and longer time reduced cell activity and disrupted the cells. The highest EPS yield with minimal loss of cell activity and cell disruption was achieved using thermal extraction at 55℃ for 30 min, and this protocol gave good results for MBMC with different microalgae:bacteria (M:B) mass ratios. AFCS combined with thermal treatment achieved the most-efficient biomass differentiation and low EPS loss (<4.5 %) for the entire range of M:B ratios. EPS concentrations in bacteria were larger than in microalgae: 42.8 ± 0.4 mg COD/g TSS versus 9.19 ± 0.38 mg COD/g TSS. These findings document sensitive and accurate methods to extract and quantify EPS from microalgal-bacteria aggregates.

TGF-ß1-triggered BMI1 and SMAD2 cooperatively regulate miR-191 to modulate bone formation.

Transforming growth factor ß 1 (TGF-ß1), as the most abundant signaling molecule in bone matrix, is essential for bone homeostasis. However, the signaling transduction of TGF-ß1 in the bone-forming microenvironment remains unknown. Here, we showed that microRNA-191 (miR-191) was downregulated during osteogenesis and further decreased by osteo-favoring TGF-ß1 in bone marrow mesenchymal stem cells (BMSCs). MiR-191 was lower in bone tissues from children than in those from middle-aged individuals and it was negatively correlated with collagen type I alpha 1 chain (COL1A1). MiR-191 depletion significantly increased osteogenesis and bone formation in vivo. Hydrogels embedded with miR-191-low BMSCs displayed a powerful bone repair effect. Mechanistically, transcription factors BMI1 and SMAD2 coordinately controlled miR-191 level. In detail, BMI1 and pSMAD2 were both upregulated by TGF-ß1 under osteogenic condition. SMAD2 activated miR-191 transcription, while BMI1 competed with SMAD2 for binding to miR-191 promoter region, thus disturbing the activation of SMAD2 on miR-191 and reducing miR-191 level. Altogether, our findings reveal that miR-191 regulated by TGF-ß1-induced BMI1 and SMAD2 negatively modulated bone formation and regeneration, and inhibition of miR-191 might be therapeutically useful to enhance bone repair in clinic.

Machine Learning-Assisted Portable Microplasma Optical Emission Spectrometer for Food Safety Monitoring.

To meet the needs of food safety for simple, rapid, and low-cost analytical methods, a portable device based on a point discharge microplasma optical emission spectrometer (µPD-OES) was combined with machine learning to enable on-site food freshness evaluation and detection of adulteration. The device was integrated with two modular injection units (i.e., headspace solid-phase microextraction and headspace purge) for the examination of various samples. Aromas from meat and coffee were first introduced to the portable device. The aroma molecules were excited to specific atomic and molecular fragments at excited states by room temperature and atmospheric pressure microplasma due to their different atoms and molecular structures. Subsequently, different aromatic molecules obtained their own specific molecular and atomic emission spectra. With the help of machine learning, the portable device was successfully applied to the assessment of meat freshness with accuracies of 96.0, 98.7, and 94.7% for beef, pork, and chicken meat, respectively, through optical emission patterns of the aroma at different storage times. Furthermore, the developed procedures can identify beef samples containing different amounts of duck meat with an accuracy of 99.5% and classify two coffee species without errors, demonstrating the great potential of their application in the discrimination of food adulteration. The combination of machine learning and µPD-OES provides a simple, portable, and cost-effective strategy for food aroma analysis, potentially addressing field monitoring of food safety.

"Zero" Intrinsic Fluorescence Sensing-Platforms Enable Ultrasensitive Whole Blood Diagnosis and In Vivo Imaging.

Abnormal physiological processes and diseases can lead to content or activity fluctuations of biocomponents in organelles and whole blood. However, precise monitoring of these abnormalities remains extremely challenging due to the insufficient sensitivity and accuracy of available fluorescence probes, which can be attributed to the background fluorescence arising from two sources, 1) biocomponent autofluorescence (BCAF) and 2) probe intrinsic fluorescence (PIF). To overcome these obstacles, we have re-engineered far-red to NIR II rhodol derivatives that possess weak BCAF interference. And a series of "zero" PIF sensing-platforms were created by systematically regulating the open-loop/spirocyclic forms. Leveraging these advancements, we devised various ultra-sensitive NIR indicators, achieving substantial fluorescence boosts (190 to 1300-fold). Among these indicators, 8-LAP demonstrated accurate tracking and quantifying of leucine aminopeptidase (LAP) in whole blood at various stages of tumor metastasis. Furthermore, coupling 8-LAP with an endoplasmic reticulum-targeting element enabled the detection of ERAP1 activity in HCT116 cells with p53 abnormalities. This delicate design of eliminating PIF provides insights into enhancing the sensitivity and accuracy of existing fluorescence probes toward the detection and imaging of biocomponents in abnormal physiological processes and diseases.

Nanocellulose-based antimicrobial aerogels with humidity-triggered release of cinnamaldehyde.

Active food packaging with controlled release behavior of volatile antimicrobials is highly desirable for enhancing the quality of fresh produce. In this study, humidity-responsive antimicrobial aerogels were developed using chitosan and dialdehyde nanocellulose, loading with cyclodextrin-cinnamaldehyde inclusion complexes (ICs) for achieving humidity-triggered release of the encapsulated antimicrobial agent. Results showed that the prepared aerogels had capable water absorption ability, which could be served as absorbent pads to take in excessive exudate from packaged fresh produce. More importantly, the accumulative release rate of cinnamaldehyde from the antimicrobial aerogels was significantly improved at RH 98 % compared to that at RH 70 %, which accordingly inactivated all the inoculated Escherichia coli, Staphylococcus aureus and Botrytis cinerea. Additionally, strawberries packaged with the antimicrobial aerogels remained in good conditions after 5 d of storage at 22 ± 1 °C. The prepared composite aerogels had the potential to extend the shelf life of fresh strawberries.

Laser-Induced Skin-like Flexible Pressure Sensor for Artificial Intelligence Speech Recognition.

Skin-like flexible pressure sensors with good sensing performance have great application potential, but their development is limited owing to the need for multistep, high-cost, and low-efficiency preparation processes. Herein, a simple, low-cost, and efficient laser-induced forming process is proposed for the first time to prepare a skin-like flexible piezoresistive sensor. In the laser-induced forming process, based on the photothermal effect of graphene and the foaming effect of glucose, a skin-like polydimethylsiloxanes (PDMS) film with porous structures and surface protrusions is obtained by using infrared laser irradiation of the glucose/graphene/PDMS prepolymer film. Further, based on the skin-like PDMS film with a graphene conductive layer, a new skin-like flexible piezoresistive sensor is obtained. Due to the stress concentration caused by the surface protrusions and the low stiffness caused by the porous structures, the flexible piezoresistive sensor realizes an ultrahigh sensitivity of 1348 kPa-1 at 0-2 kPa, a wide range of 200 kPa, a fast response/recovery time of 52 ms/35 ms, and good stability over 5000 cycles. The application of the sensor to the detection of human pulses and robot clamping force indicates its potential for health monitoring and soft robots. Furthermore, in combination with the neural network (CNN) algorithm in artificial intelligence technology, the sensor achieves 95% accuracy in speech recognition, which demonstrates its great potential for intelligent wearable electronics. Especially, the laser-induced forming process is expected to facilitate the efficient, large-scale preparation of flexible devices with multilevel structures.