Translucency of chairside monolithic zirconias using different sintering ovens: An in vitro investigation.

OBJECTIVE: To evaluate the translucency of several monolithic zirconias (MZ) processed in various sintering ovens designed for single-visit, chairside use. METHODS: Discs (n = 40) from zirconia blocks were fabricated for each MZ at manufacturer-recommended minimal thicknesses, as provided in each material's instructions for use: IPS e.max ZirCAD LT (ZLT); CEREC Zirconia+ (CZ+); 3M Chairside (3M); KATANA Zirconia (KT). Groups (n = 10) were sintered following manufacturer instructions for each oven: CEREC SpeedFire, Ivoclar CS4, Ivoclar CS6, and Ivoclar S2 (laboratory furnace control). Specimens were highly polished on one side and glazed on the other. Each side was measured with a spectrophotometer against white and black backgrounds to determine translucency parameter (TP) and contrast ratio (CR) values. Results for TP and CR for each material and oven combination were compared with a linear mixed model. Oven precision was evaluated using the Kruskall-Wallis test. RESULTS: Glazed specimens were more translucent than polished ones (p < 0.001). ZLT and CZ+ were more translucent than 3M and KT regardless of the sintering oven (p < 0.01). Several oven/material combinations reached or exceeded the S2 oven TP: CS4 with CZ+ and 3M; CS6 with ZLT and KT (p < 0.01). SpeedFire was significantly less precise (p < 0.05) and produced lower TP values for ZLT, CZ+, and KT (p < 0.01). Results for TP and CR were highly correlated. CONCLUSIONS: MZ surface finish, material thickness, and oven used all had a significant effect on translucency. Some chairside-oriented solutions produced results with translucency equal to conventionally processed zirconia. CLINICAL SIGNIFICANCE: The translucency of a ceramic restoration is an important factor in determining its esthetics. Clinicians desiring the most esthetic outcomes with monolithic zirconia should be aware of the significant effects that surface finishing, material thickness, and the sintering oven used can have on restoration translucency.

Differences in Volumetric Tooth Loss for Monolithic Ceramic Crowns, Occlusal Overlays and Partial Coverage Onlays.

PURPOSE: The purpose of this in vitro study was to compare the volumetric loss of clinical crown structure for commonly encountered clinical situations for monolithic ceramic crowns, occlusal overlays, and partial coverage onlays. MATERIALS AND METHODS: Typodont teeth made with pre-existing mesio-occluso-distal (MOD) preparations for mandibular first molars and maxillary first premolars were prepared with three different preparations: a full contour monolithic zirconia crown, a lithium disilicate occlusal overlay, and mesio-occluso-disto-buccal/mesio-occluso-disto-lingual (MODB/MODL) lithium disilicate onlays for premolars/molars. 3D metrological software was used to evaluate the volumetric loss of clinical crown structure for each preparation type. Subsequently, the mesiolingual cusps of mandibular molars and buccal cusps of maxillary premolars were excluded for a separate analysis, to simulate patient presentation with an existing restoration and sheared off cusp. RESULTS: Full coverage monolithic zirconia crowns removed 45.37 - 219.53 mm3 of remaining clinical tooth structure, depending on the clinical scenario and tooth position, while lithium disilicate overlays removed 27.48 - 105.13 mm3. MODB/MODL lithium disilicate onlays removed 5.48 - 47.45 mm3 . In each scenario tested, MODB/MODL onlays removed significantly less clinical crown structure than overlays (P<0.001); both MODB/MODL onlays and overlays removed significantly less structure than full coverage crowns (P<0.001). CONCLUSION: Monolithic zirconia crown restorations require significantly more removal of remaining tooth structure than lithium disilicate occlusal overlays and partial coverage onlays for commonly occurring clinical situations requiring indirect restorations. Int J Prosthodont 2023. doi: 10.11607/ijp.8011.

Evaluation of the spatter-reduction effectiveness and aerosol containment of eight dry-field isolation techniques.

OBJECTIVE: The novel coronavirus that was first identified in Wuhan, China, in December 2019, created a pandemic that has the potential to change the paradigm of health care delivery. Of interest to the dental community is the presence of SARS-CoV-2 in the saliva of the affected patients that can potentially cause transmission of COVID-19 via droplets. The highly infectious nature of the pathogen has created a sense of urgency and a need for extra caution to prevent the spread of the disease and the potential infection of patients and the entire dental team. Spatter consists of droplets up to 50 µm in size that are effectively stopped by barriers such as gloves, masks, and gowns. Aerosols are defined as droplet particles smaller than 5 µm that can remain airborne for extended periods and that have been reported to be significant in viral respiratory infections. In this study, aerosol represented by particulate matter with a size of 2.5 µm (PM2.5) was measured. METHOD AND MATERIALS: Eight dry-field isolation methods were tested in a setup that included a realistic dental manikin and a high-speed handpiece that generated air-water spray. Environmental noise generated by the suction devices, suction flow rate of each setup, and the amount of environmental spatter and aerosols, were measured. RESULTS: The experimental setups showed significant variability in the suction flow rate, but this was not correlated to the level of sound generated. Some experimental setups caused a short-term level of noise that exceeded the NIOSH (National Institute for Occupational Safety and Health) guidelines and were close to the OSHA (Occupational Safety and Health Administration) recommended thresholds. It is also worth noting that the variability in the flow rate is not reflected in the efficacy of the experimental setups to mitigate spatter. All experimental setups, except the IsoVac system, provided statistically significantly better spatter mitigation compared to the control. All experimental setups also were efficient in mitigating aerosols compared with the positive control (P < .0001) and most systems yielded results similar to the negative control ambient PM (P > .05). CONCLUSION: Results indicate that spatter reduction was significantly better amongst the setups in which an additional high-volume evacuator (HVE) line was used. All setups were efficient at mitigating PM2.5 aerosols in comparison to the control. The conclusions of this study should be interpreted with caution, and additional mitigation techniques consistent with the Centers for Disease Control and Prevention recommendations must be implemented in dental practices.

Esterase Inhibition and Copper Release from Copper Iodide Dental Adhesives - An In Vitro Study.

PURPOSE: To investigate whether dental adhesives modified with polyacrylic acid copper iodide particles could inhibit esterase activity in vitro and the copper release rate from resin matrices, as well as the correlation between the two variables. MATERIALS AND METHODS: Different concentrations of copper iodide (0.1, 0.5 and 1.0 mg/ml) were incorporated into three commercially available adhesives representative of each type. Disk specimens (n = 3) were fabricated and incubated in cholesterol esterase and pseudo-cholinesterase solutions for 16 days (37°C, pH 7.0). The enzymatic activity and rate of copper release from resin matrices were evaluated at different 4, 8, 12, and 16 days with a UV/visible-light spectrophotometer. RESULTS: Increased copper release and reduced enzymatic activity were observed with higher concentrations of copper iodide (p < 0.001). Greater copper release with reduced enzymatic activity was also demonstrated at the earlier time periods with this relationship reversing over time (p < 0.001). A moderate negative correlation between the variables was evident (-0.441; p = 0.01). CONCLUSIONS: Adhesives containing copper iodide can inhibit esterase activity in a dose- and time-dependent manner. The correlation between the variables suggests that enzymatic activity may depend on the availability of copper.

Evaluation of the trueness and precision of complete arch digital impressions on a human maxilla using seven different intraoral digital impression systems and a laboratory scanner.

OBJECTIVES: An impression accuracy study using a cadaver maxilla was performed using both prepared and intact teeth as well as palatal tissue. MATERIALS AND METHODS: Three crown preparations were performed on a cadaver maxilla. Seven different digital impression systems along with polyvinylsiloxane impressions were used to create digital models of the maxilla. Three-dimensional (3D) files of the experimental models were compared to a master model. The 3D files were overlaid and analyzed using a comparison software to create color coded figures that were measured for deviations between the master and experimental models. RESULTS: For scanning tooth structure, only the Planscan was significantly less accurate than the rest of impression techniques. No significant differences in accuracy were found between models created using digital impressions and those created from traditional vinyl polysiloxane impressions with cross arch deviations ranging from 18 to 39 µm for each. CONCLUSIONS: Impressions taken using all digital impression systems, save for the Planscan, were able to accurately replicate the tissues of a complete arch human maxilla. CLINICAL SIGNIFICANCE: Studies examining accuracy of digital impression systems have generally been performed on materials other than dental tissues. Optically, materials such as plastic and metal have properties different from enamel and dentin. This study evaluates accuracy of digital impression systems on human dentin, enamel, and soft tissues.

Evaluation of the effect scan pattern has on the trueness and precision of six intraoral digital impression systems.

OBJECTIVE: Clinicians have been slow to adopt digital impression technologies due possibly to perceived technique sensitivities involved in data acquisition. This research has two aims: determine whether scan pattern and sequence affects the accuracy of the three-dimensional (3D) model created from this digital impression and to compare the 5 imaging systems with regards to their scanning accuracy for sextant impressions. MATERIALS AND METHODS: Six digital intraoral impression systems were used to scan a typodont sextant with optical properties similar to natural teeth. The impressions were taken using five different scan patterns and the resulting digital models were overlayed on a master digital model to determine the accuracy of each scanner performing each scan pattern. Furthermore, regardless of scan pattern, each digital impression system was evaluated for accuracy to the other systems in this same manner. RESULTS: No differences of significance were noted in the accuracy of 3D models created using six distinct scan patterns with one exception involving the CEREC Omnicam. Planmeca Planscan was determined to be the truest scanner while 3Shape Trios was determined to be the most precise for sextant impression making. CONCLUSIONS: Scan pattern does not significantly affect the accuracy of the resulting digital model for sextant scanning. CLINICAL SIGNIFICANCE: Companies who make digital impression systems often recommend a scan pattern specific for their system. However, every clinical scanning scenario is different and may require a different approach. Knowing how important scan pattern is with regards to accuracy would be helpful for guiding a growing number of practitioners who are utilizing this technology.

Anatomic Customization of Root-Analog Dental Implants With Cone-Beam CT and CAD/CAM Fabrication: A Cadaver-Based Pilot Evaluation.

Existing root-analog dental implant systems have no standardized protocols regarding retentive design, surface manipulation, or prosthetic attachment design relative to the site's unique anatomy. Historically, existing systems made those design choices arbitrarily. For this report, strategies were developed that deliberately reference the adjacent anatomy, implant and restorable path of draw, and bone density for implant and retentive design. For proof of concept, dentate arches from human cadavers were scanned using cone-beam computed tomography and then digitally modeled. Teeth of interest were virtually extracted and manipulated via computer-aided design to generate root-analog implants from zirconium. We created a stepwise protocol for analyzing and developing the implant sites, implant design and retention, and prosthetic emergence and connection all from the pre-op cone-beam data. Root-analog implants were placed at the time of extraction and examined radiographically and mechanically concerning ideal fit and stability. This study provides proof of concept that retentive root-analog implants can be produced from cone-beam data while improving fit, retention, safety, esthetics, and restorability when compared to the existing protocols. These advancements may provide the critical steps necessary for clinical relevance and success of immediately placed root-analog implants. Additional studies are necessary to validate the model prior to clinical trial.

Biocompatibility and bond degradation of poly-acrylic acid coated copper iodide-adhesives.

OBJECTIVE: To investigate the effect of poly-acrylic acid (PAA) copper iodide (CuI) adhesives on bond degradation, tensile strength, and biocompatibility. METHODS: PAA-CuI particles were incorporated into Optibond XTR, Optibond Solo and XP Bond in 0.1 and 0.5mg/ml. Clearfil SE Protect, an MDPB-containing adhesive, was used as control. The adhesives were applied to human dentin, polymerized and restored with composite in 2mm-increments. Resin-dentin beams (0.9±0.1mm2) were evaluated for micro-tensile bond strength after 24h, 6 months and 1year. Hourglass specimens (10×2×1mm) were evaluated for ultimate tensile strength (UTS). Cell metabolic function of human gingival fibroblast cells exposed to adhesive discs (8×1mm) was assessed with MTT assay. Copper release from adhesive discs (5×1mm) was evaluated with UV-vis spectrophotometer after immersion in 0.9% NaCl for 1, 3, 5, 7, 10, 14, 21 and 30 days. SEM, EDX and XRF were conducted for microstructure characterization. RESULTS: XTR and Solo did not show degradation when modified with PAA-CuI regardless of the concentration. The UTS for adhesives containing PAA-CuI remained unaltered relative to the controls. The percent viable cells were reduced for Solo 0.5mg/ml and XP 0.1 or 0.5mg/ml PAA-CuI. XP demonstrated the highest ion release. For all groups, the highest release was observed at days 1 and 14. SIGNIFICANCE: PAA-CuI particles prevented the bond degradation of XTR and Solo after 1year without an effect on the UTS for any adhesive. Cell viability was affected for some adhesives. A similar pattern of copper release was demonstrated for all adhesives.

A novel technique for reference point generation to aid in intraoral scan alignment.

OBJECTIVE: When using a completely digital workflow on larger prosthetic cases it is often difficult to communicate to the laboratory or chairside Computer Aided Design and Computer Aided Manufacturing system the provisional prosthetic information. The problem arises when common hard tissue data points are limited or non-existent such as in complete arch cases in which the 3D model of the complete arch provisional restorations must be aligned perfectly with the 3D model of the complete arch preparations. In these instances, soft tissue is not enough to ensure an accurate automatic or manual alignment due to a lack of well-defined reference points. A new technique is proposed for the proper digital alignment of the 3D virtual model of the provisional prosthetic to the 3D virtual model of the prepared teeth in cases where common and coincident hard tissue data points are limited. Clinical considerations: A technique is described in which fiducial composite resin dots are temporarily placed on the intraoral keratinized tissue in strategic locations prior to final impressions. These fiducial dots provide coincident and clear 3D data points that when scanned into a digital impression allow superimposition of the 3D models. CONCLUSIONS: Composite resin dots on keratinized tissue were successful at allowing accurate merging of provisional restoration and post-preparation 3D models for the purpose of using the provisional restorations as a guide for final CLINICAL SIGNIFICANCE: Composite resin dots placed temporarily on attached tissue were successful at allowing accurate merging of the provisional restoration 3D models to the preparation 3D models for the purposes of using the provisional restorations as a guide for final restoration design and manufacturing. In this case, they allowed precise superimposition of the 3D models made in the absence of any other hard tissue reference points, resulting in the fabrication of ideal final restorations.

Antibacterial properties of copper iodide-doped glass ionomer-based materials and effect of copper iodide nanoparticles on collagen degradation.

OBJECTIVES: This study investigated the antibacterial properties and micro-hardness of polyacrylic acid (PAA)-coated copper iodide (CuI) nanoparticles incorporated into glass ionomer-based materials, and the effect of PAA-CuI on collagen degradation. MATERIALS AND METHODS: PAA-CuI nanoparticles were incorporated into glass ionomer (GI), Ionofil Molar AC, and resin-modified glass ionomer (RMGI), Vitrebond, at 0.263 wt%. The antibacterial properties against Streptococcus mutans (n = 6/group) and surface micro-hardness (n = 5/group) were evaluated. Twenty dentin beams were completely demineralized in 10 wt% phosphoric acid and equally divided in two groups (n = 10/group) for incubation in simulated body fluid (SBF) or SBF containing 1 mg/ml PAA-CuI. The amount of dry mass loss and hydroxyproline (HYP) released were quantified. Kruskal-Wallis, Student's t test, two-way ANOVA, and Mann-Whitney were used to analyze the antibacterial, micro-hardness, dry mass, and HYP release data, respectively (p < 0.05). RESULTS: Addition of PAA-CuI nanoparticles into the glass ionomer matrix yielded significant reduction (99.999 %) in the concentration of bacteria relative to the control groups. While micro-hardness values of PAA-CuI-doped GI were no different from its control, PAA-CuI-doped RMGI demonstrated significantly higher values than its control. A significant decrease in dry mass weight was shown only for the control beams (10.53 %, p = 0.04). Significantly less HYP was released from beams incubated in PAA-CuI relative to the control beams (p < 0.001). CONCLUSIONS: PAA-CuI nanoparticles are an effective additive to glass ionomer-based materials as they greatly enhance their antibacterial properties and reduce collagen degradation without an adverse effect on their mechanical properties. CLINICAL RELEVANCE: The use of copper-doped glass ionomer-based materials under composite restorations may contribute to an increased longevity of adhesive restorations, because of their enhanced antibacterial properties and reduced collagen degradation.

Utilizing self-assessment software to evaluate student wax-ups in dental morphology.

Traditionally, evaluating student work in preclinical courses has relied on the judgment of experienced clinicians utilizing visual inspection. However, research has shown significant disagreement between different evaluators (interrater reliability) and between results from the same evaluator at different times (intrarater reliability). This study evaluated a new experimental software (E4D Compare) to compare 66 student-produced tooth wax-ups at one U.S. dental school to an ideal standard after both had been digitally scanned. Using 3D surface-mapping technology, a numerical evaluation was generated by calculating the surface area of the student's work that was within a set range of the ideal. The aims of the study were to compare the reliability of faculty and software grades and to determine the ideal tolerance value for the software. The investigators hypothesized that the software would provide more consistent feedback than visual grading and that a tolerance value could be determined that closely correlated with the faculty grade. The results showed that a tolerance level of 450 µm provided 96% agreement of grades compared with only 53% agreement for faculty. The results suggest that this software could be used by faculty members as a mechanism to evaluate student work and for students to use as a self-assessment tool.

Incorporation of bactericidal poly-acrylic acid modified copper iodide particles into adhesive resins.

OBJECTIVES: This study aimed to investigate incorporation of polyacrylic acid (PAA) coated copper iodide (CuI) nanoparticles into dental adhesives, and to evaluate for the first time, their antibacterial properties, bond strength and cytotoxicity. METHODS: PAA-CuI nanoparticles were synthesized and incorporated into commercially available adhesives Optibond XTR (1.0mg/ml) and XP Bond (0.5 and 1.0mg/ml). The antibacterial properties of experimental and control specimens were evaluated (n=8), after ageing for 18h or 1 year, against Streptococcus mutans (1×10(8)cells/ml). Bond strength to human dentine of the control and experimental adhesives was evaluated by shear bond strength (n=10). For cytotoxicity evaluation, HGF cells were cultured with gingival fibroblast media and exposed to control and experimental adhesive blends (n=3). An MTT cell viability assay was used to assess cell metabolic function. A one-way analysis of variance followed by Tukey's test was used for data analysis. RESULTS: Significantly greater antibacterial properties were demonstrated for PAA-CuI containing adhesives after ageing for 18h or 1 year relative to all control groups. A reduction in Streptococcus mutans viable cell count of 99.99%, 99.99% and 79.65% was shown for XP Bond - 0.5mg/ml, XP Bond - 1.0mg/ml and Optibond XTR - 1.0mg/ml PAA-CuI after ageing for 18h, and 99.99% for both XP Bond - 0.5mg/ml and XP Bond - 1.0mg/ml PAA-CuI after ageing for 1 year. No significant variations in shear bond strength or cytotoxicity were detected between the experimental resins and their corresponding controls. CONCLUSIONS: PAA-CuI nanoparticles are an effective additive to adhesive blends as it renders them antibacterial without adversely affecting their bond strength or cytotoxicity. CLINICAL SIGNIFICANCE: The incorporation of PAA-coated copper iodide particles into adhesive resins renders the adhesive antibacterial to S. mutans for at least 1 year in vitro. This may prevent or delay bacterial invasion and the consequent development of caries lesions if the adhesive interface becomes defective.

Dental students' opinions of preparation assessment with E4D compare software versus traditional methods.

The aim of this study was to evaluate dental students' opinions regarding the utilization of a new grading software program for student self-assessment and a faculty-grading tool in a preclinical course. Using surface mapping technology, this program, called E4D Compare, yields a digital model of a student's preparation that is color-coded to show deficient areas. The program has now been used for two years at the James B. Edwards College of Dental Medicine at the Medical University of South Carolina, and the students previously assessed with E4D Compare have now entered into the dental clinics. For this study, students were asked to complete an anonymous survey for the investigators to evaluate students' attitudes and opinions on the effectiveness of this software in their preclinical courses to determine if this type of feedback helped them develop clinical skills. The survey also sought to collect students' opinions on the traditional objective criteria-based grading system. The survey was distributed to all members of the Classes of 2014 and 2015; it yielded a 59 percent response rate for the two classes, with a total of eighty-one students responding. Overall, the majority of students preferred the E4D Compare grading system over traditional hand-grading methods. The grading system provided instant, objective, and visual feedback that allowed students to easily see where their deficiencies were and encouraged them to work towards an ideal final product.

E4D compare software: an alternative to faculty grading in dental education.

The traditional method of evaluating student tooth preparations in preclinical courses has relied on the judgment of experienced clinicians primarily utilizing visual inspection. At times, certain aids such as reduction matrices or reduction instruments of known dimension are used to assist the evaluator in determining the grade. Despite the skill and experience of the evaluator, there is still a significant element of uncertainty and inconsistency in these methods. Students may perceive this inconsistency as a form of subjective, arbitrary, and empirical evaluation, which often results in students' focusing more on the grade than the actual learning or developing skills necessary to accomplish the preparation properly. Perceptions of favoritism, discrimination, and unfairness (whether verbalized or not) may interfere with the learning process. This study reports the use of a new experimental scanning and evaluation software program (E4D Compare) that can consistently and reliably scan a student's tooth preparation and compare it to a known (faculty-determined) standardized preparation. An actual numerical evaluation is generated by the E4D Compare software, thereby making subjective judgments by the faculty unnecessary. In this study, the computer-generated result was found to be more precise than the hand-graded method.