TeV/m catapult acceleration of electrons in graphene layers.

Recent nanotechnology advances enable fabrication of layered structures with controllable inter-layer gap, giving the ultra-violet (UV) lasers access to solid-state plasmas which can be used as medium for electron acceleration. By using a linearly polarized 3 fs-long laser pulse of 100 nm wavelength and 10[Formula: see text] W/cm[Formula: see text] peak intensity, we show numerically that electron bunches can be accelerated along a stack of ionized graphene layers. Particle-In-Cell (PIC) simulations reveal a new self-injection mechanism based on edge plasma oscillations, whose amplitude depends on the distance between the graphene layers. Nanometre-size electron ribbons are electrostatically catapulted into buckets of longitudinal electric fields in less than 1 fs, as opposed to the slow electrostatic pull, common to laser wakefield acceleration (LWFA) schemes in gas-plasma. Acceleration then proceeds in the blowout regime at a gradient of 4.79 TeV/m yielding a 0.4 fs-long bunch with a total charge in excess of 2.5 pC and an average energy of 6.94 MeV, after travelling through a graphene target as short as 1.5 [Formula: see text]m. These parameters are unprecedented within the LWFA research area and, if confirmed experimentally, may have an impact on fundamental femtosecond research.

Beam characterisation studies of the 62 MeV proton therapy beamline at the Clatterbridge Cancer Centre.

The Clatterbridge Cancer Centre (CCC) in the United Kingdom is the world's first hospital proton beam therapy facility, providing treatment for ocular cancers since 1989. A 62 MeV beam of protons is produced by a Scanditronix cyclotron and transported through a passive delivery system. In addition to the long history of clinical use, the facility supports a wide programme of experimental work and as such, an accurate and reliable simulation model of the treatment beamline is highly valuable. However, as the facility has seen several changes to the accelerator and beamline over the years, a comprehensive study of the CCC beam dynamics is needed to firstly examine the beam optics. An extensive analysis was required to overcome facility related constraints to determine fundamental beamline parameters and define an optical lattice written with the Methodical Accelerator Design (MAD-X) and the particle tracking Beam Delivery Simulation (BDSIM) code. An optimised case is presented and simulated results of the optical functions, beam distribution, losses and the transverse rms beam sizes along the beamline are discussed. Corresponding optical and beam information was used in TOPAS to simulate transverse beam profiles and compared to EBT3 film measurements. We provide an overview of the magnetic components, beam transport, cyclotron, beam and treatment related parameters necessary for the development of a present day optical model of the facility. This work represents the first comprehensive study of the CCC facility to date, as a basis to determine input beam parameters to accurately simulate and completely characterise the beamline.

Noninvasive 3D Field Mapping of Complex Static Electric Fields.

Many upcoming experiments in antimatter research require low-energy antiproton beams. With a kinetic energy in the order of 100 keV, the standard magnetic components to control and focus the beams become less effective. Therefore, electrostatic components are being developed and installed in transfer lines and storage rings. However, there is no equipment available to precisely map and check the electric field generated by these elements. Instead, one has to trust in simulations and, therefore, depend on tight fabrication tolerances. Here we present, for the first time, a noninvasive way to experimentally probe the electrostatic field in a 3D volume with a microsensor. Using the example of an electrostatic quadrupole focusing component, we find excellent agreement between a simulated and real field. Furthermore, it is shown that the spatial resolution of the probe is limited by the electric field curvature which is almost zero for the quadrupole. With a sensor resolution of 61 V/m/sqrt[Hz], the field deviation due to a noncompliance with the tolerances can be resolved. We anticipate that this compact and practical field strength probe will be relevant also for other scientific and technological disciplines such as atmospheric electricity or safeguarding near power infrastructure.