Numerical Simulation of an Inverted Perovskite Solar Cell Using a SiOx Layer as Down-Conversion Energy Material to Improve Efficiency and Stability.

Inverted perovskite solar cells (PSCs) have gained much attention due to their low hysteresis effect, easy fabrication, and good stability. In this research, an inverted perovskite solar cell ITO/PEDOT:PSS/CH3NH3PbI3/PCBM/Ag structure was simulated and optimized using SCAPS-1D version 3.3.10 software. The influence on the device of parameters, including perovskite thickness, total defect density, series and shunt resistances, and operating temperature, are discussed and analyzed. With optimized parameters, the efficiency increased from 13.47% to 18.33%. Then, a new SiOx/ITO/PEDOT:PSS/CH3NH3PbI3/PCBM/Ag device was proposed which includes a silicon-rich oxide (SiOx) layer. This material was used as the down-conversion energy material, which converts high-energy photons (ultraviolet UV light) into low-energy photons (visible light), improving the stability and absorption of the device. Finally, with SiOx, we obtained an efficiency of 22.46% in the simulation. Therefore, the device with the SiOx layer is the most suitable as it has better values for current density-voltage output and quantum efficiency than the device without SiOx.

Study of a Lead-Free Perovskite Solar Cell Using CZTS as HTL to Achieve a 20% PCE by SCAPS-1D Simulation.

In this paper, a n-i-p planar heterojunction simulation of Sn-based iodide perovskite solar cell (PSC) is proposed. The solar cell structure consists of a Fluorine-doped tin oxide (FTO) substrate on which titanium oxide (TiO2) is placed; this material will act as an electron transporting layer (ETL); then, we have the tin perovskite CH3NH3SnI3 (MASnI3) which is the absorber layer and next a copper zinc and tin sulfide (CZTS) that will have the function of a hole transporting layer (HTL). This material is used due to its simple synthesis process and band tuning, in addition to presenting good electrical properties and stability; it is also a low-cost and non-toxic inorganic material. Finally, gold (Au) is placed as a back contact. The lead-free perovskite solar cell was simulated using a Solar Cell Capacitance Simulator (SCAPS-1D). The simulations were performed under AM 1.5G light illumination and focused on getting the best efficiency of the solar cell proposed. The thickness of MASnI3 and CZTS, band gap of CZTS, operating temperature in the range between 250 K and 350 K, acceptor concentration and defect density of absorber layer were the parameters optimized in the solar cell device. The simulation results indicate that absorber thicknesses of 500 nm and 300 nm for CZTS are appropriate for the solar cell. Further, when optimum values of the acceptor density (NA) and defect density (Nt), 1016 cm-3 and 1014 cm-3, respectively, were used, the best electrical values were obtained: Jsc of 31.66 mA/cm2, Voc of 0.96 V, FF of 67% and PCE of 20.28%. Due to the enhanced performance parameters, the structure of the device could be used in applications for a solar energy harvesting system.

Are there gross motor coordination spurts during mid-childhood?

OBJECTIVES: The aims of this study were (1) to identify the timing of the mid-growth spurt (MGS) in stature in children and (2) to identify gross motor coordination (GMC) spurts when aligned by the age of attainment of the MGS (aMGS). METHODS: Stature, weight, and GMC were measured in 245 Portuguese children followed annually from 6 to 10 years. GMC was assessed and to estimate children's MGS in stature as well as GMC spurts in each of the four tests aligned by aMGS, we used a nonsmoothed polynomial methodology. RESULTS: In boys, the aMGS was attained at 7.8 years, whereas in girls it was 8.0 years. In boys, the peak MGS was 6.2 cm∙yr-1 and in girls it was 6.4 cm∙yr-1 . In boys, the peak for walking backwards (WB) occurred 18 months before aMGS (14.9-points∙yr-1 ), jumping sideways (JS) was 12 months after aMGS (13.5-points∙yr-1 ), hopping on one leg (HO) was 18 months before aMGS (11.7-points∙yr-1 ), and shifting platform (SP) was 12 months before aMGS (6.8-points∙yr-1 ). In girls, WB spurts occurred 12 months after aMGS (13.3-points∙yr-1 ), JS was 12 months before aMGS (10.5-points∙yr-1 ), HO was coincident with aMGS (10.4-points∙yr-1 ), and SP was 18 as well as 12 months before aMGS (7.2-points∙yr-1 ). No differences were observed in the mean peak spurts between sexes in the GMC tests. CONCLUSIONS: Boys and girls reached their MGS in stature at about the same chronological age. Spurts in GMC did not express themselves in the same biological timing relative to aMGS in stature, and there are sex differences.

Microplastics in four estuarine rivers in the Chesapeake Bay, U.S.A.

Once believed to degrade into simple compounds, increasing evidence suggests plastics entering the environment are mechanically, photochemically, and/or biologically degraded to the extent that they become imperceptible to the naked eye yet are not significantly reduced in total mass. Thus, more and smaller plastics particles, termed microplastics, reside in the environment and are now a contaminant category of concern. The current study tested the hypotheses that microplastics concentration would be higher in proximity to urban sources, and vary temporally in response to weather phenomena such as storm events. Triplicate surface water samples were collected approximately monthly between July and December 2011 from four estuarine tributaries within the Chesapeake Bay, U.S.A. using a manta net to capture appropriately sized microplastics (operationally defined as 0.3-5.0 mm). Selected sites have watersheds with broadly divergent land use characteristics (e.g., proportion urban/suburban, agricultural and/or forested) and wide ranging population densities. Microplastics were found in all but one of 60 samples, with concentrations ranging over 3 orders of magnitude (<1.0 to >560 g/km(2)). Concentrations demonstrated statistically significant positive correlations with population density and proportion of urban/suburban development within watersheds. The greatest microplastics concentrations also occurred at three of four sites shortly after major rain events.