Dimensional metrology of lab-on-a-chip internal structures: a comparison of optical coherence tomography with confocal fluorescence microscopy.

The characterization of internal structures in a polymeric microfluidic device, especially of a final product, will require a different set of optical metrology tools than those traditionally used for microelectronic devices. We demonstrate that optical coherence tomography (OCT) imaging is a promising technique to characterize the internal structures of poly(methyl methacrylate) devices where the subsurface structures often cannot be imaged by conventional wide field optical microscopy. The structural details of channels in the devices were imaged with OCT and analyzed with an in-house written ImageJ macro in an effort to identify the structural details of the channel. The dimensional values obtained with OCT were compared with laser-scanning confocal microscopy images of channels filled with a fluorophore solution. Attempts were also made using confocal reflectance and interferometry microscopy to measure the channel dimensions, but artefacts present in the images precluded quantitative analysis. OCT provided the most accurate estimates for the channel height based on an analysis of optical micrographs obtained after destructively slicing the channel with a microtome. OCT may be a promising technique for the future of three-dimensional metrology of critical internal structures in lab-on-a-chip devices because scans can be performed rapidly and noninvasively prior to their use.

Microfluidic based contactless dielectrophoretic device: Modeling and analysis.

While there have been many attempts at patterning cells onto substrates, a reliable method for trapping cell clusters and forming cell arrays in a predefined geometry remains to be demonstrated. We intend to develop a multielectrode array platform to initially trap cells via dielectrophoresis (DEP) and to later measure their electrical activity. As a first step toward that objective, here we present an interdigitated microfabricated comb structure. We designed an optimal insulation layer via finite element modeling for maximum dielectrophoretic field strength in solution and minimal cell damage. The microfabricated structure was combined with a microfluidic channel to vertically constrain cell position. With the objective of capturing cells onto the substrate, we here show that there is an optimal thickness of dielectric which limits electrolysis in solution and still allows for sufficient dielectrophoretic force on the cells to pull them onto the surface.

Toxic evaluation of organic extracts from airborne particulate matter in Puerto Rico.

In recent years, several hypotheses have emerged to explain the toxicologic activity of particulate matter. Organic compounds, ultrafine particles, biologic components, and transition metals are some of the constituents that reportedly exert some type of adverse effect on human health. A considerable fraction of the urban particulate matter consists of carbon compounds, which originate mostly from anthropogenic sources. The toxicity of organic fractions from particulate matter have been mainly evaluated by considering their mutagenic activity. This research expands on the toxicologic profile of organic compounds adsorbed to particulate matter, specifically in Puerto Rico, by using the cytotoxic neutral red bioassay (NRB). The NRB uses normal human epidermal keratinocytes or other types of cells to measure the effect on cell viability when exposed to organic compounds associated to the particles in the air. We validated the NRB for particulate matter by using a standard reference material (SRM 1649). We used the NRB to determine toxicologic differences of extracts between an urban industrialized site with anthropogenic activity versus a coastal region with less human activity. The cytotoxicity associated with organic compounds in particulate matter collected at the urban industrialized site was detected in both the particulate matter (3/4) 10 microm in aerodynamic diameter (PM(10)) and particulate matter (3/4) 100 microm in aerodynamic diameter (PM(100)). Greater toxic effects were observed in PM(10) extracts than in PM(100) extracts, but PM(10) toxic effects were not significantly different from those in PM(100). The extracts from the industrialized site were more cytotoxic than the extracts from coastal reference site, although in the summer, extracts from both sites were significantly cytotoxic to normal human epidermal keratinocytes. In addition, the nonpolar extracts of both PM(10) and PM(100) exerted the greatest cytotoxicity, followed by the polar, and, finally, the moderately polar extract. This study demonstrates that extracts from the Guaynabo industrialized site were more toxic than similar extracts obtained from a reference coastal site in Fajardo, Puerto Rico.