A method for the quantification of the pressure dependent 3D collagen configuration in the arterial adventitia.

Collagen plays an important role in the response of the arterial wall to mechanical loading and presumably has a load-bearing function preventing overdistension. Collagen configuration is important for understanding this role, in particular in mathematical models of arterial wall mechanics. In this study a new method is presented to image and quantify this configuration. Collagen in the arterial adventitia is stained with CNA35, and imaged in situ at high resolution with confocal microscopy at luminal pressures from 0 to 140mm Hg. The images are processed with a new automatic approach, utilizing techniques intended for MRI-DTI data. Collagen configuration is quantified through three parameters: the waviness, the transmural angle and the helical angle. The method is demonstrated for the case of carotid arteries of the white New Zealand rabbit. The waviness indicated a gradual straightening between 40 and 80mm Hg. The transmural angle was about zero indicating that the fibers stayed within an axial-circumferential plane at all pressures. The helical angle was characterized by a symmetrical distribution around the axial direction, indicating a double symmetrical helix. The method is the first to combine high resolution imaging with a new automatic image processing approach to quantify the 3D configuration of collagen in the adventitia as a function of pressure.

Experimental investigation of collagen waviness and orientation in the arterial adventitia using confocal laser scanning microscopy.

Mechanical properties of the adventitia are largely determined by the organization of collagen fibers. Measurements on the waviness and orientation of collagen, particularly at the zero-stress state, are necessary to relate the structural organization of collagen to the mechanical response of the adventitia. Using the fluorescence collagen marker CNA38-OG488 and confocal laser scanning microscopy, we imaged collagen fibers in the adventitia of rabbit common carotid arteries ex vivo. The arteries were cut open along their longitudinal axes to get the zero-stress state. We used semi-manual and automatic techniques to measure parameters related to the waviness and orientation of fibers. Our results showed that the straightness parameter (defined as the ratio between the distances of endpoints of a fiber to its length) was distributed with a beta distribution (mean value 0.72, variance 0.028) and did not depend on the mean angle orientation of fibers. Local angular density distributions revealed four axially symmetric families of fibers with mean directions of 0°, 90°, 43° and -43°, with respect to the axial direction of the artery, and corresponding circular standard deviations of 40°, 47°, 37° and 37°. The distribution of local orientations was shifted to the circumferential direction when measured in arteries at the zero-load state (intact), as compared to arteries at the zero-stress state (cut-open). Information on collagen fiber waviness and orientation, such as obtained in this study, could be used to develop structural models of the adventitia, providing better means for analyzing and understanding the mechanical properties of vascular wall.

Role of elastin anisotropy in structural strain energy functions of arterial tissue.

The vascular wall exhibits nonlinear anisotropic mechanical properties. The identification of a strain energy function (SEF) is the preferred method to describe its complex nonlinear elastic properties. Earlier constituent-based SEF models, where elastin is modeled as an isotropic material, failed in describing accurately the tissue response to inflation-extension loading. We hypothesized that these shortcomings are partly due to unaccounted anisotropic properties of elastin. We performed inflation-extension tests on common carotid of rabbits before and after enzymatic degradation of elastin and applied constituent-based SEFs, with both an isotropic and an anisotropic elastin part, on the experimental data. We used transmission electron microscopy (TEM) and serial block-face scanning electron microscopy (SBFSEM) to provide direct structural evidence of the assumed anisotropy. In intact arteries, the SEF including anisotropic elastin with one family of fibers in the circumferential direction fitted better the inflation-extension data than the isotropic SEF. This was supported by TEM and SBFSEM imaging, which showed interlamellar elastin fibers in the circumferential direction. In elastin-degraded arteries, both SEFs succeeded equally well in predicting anisotropic wall behavior. In elastase-treated arteries fitted with the anisotropic SEF for elastin, collagen engaged later than in intact arteries. We conclude that constituent-based models with an anisotropic elastin part characterize more accurately the mechanical properties of the arterial wall when compared to models with simply an isotropic elastin. Microstructural imaging based on electron microscopy techniques provided evidence for elastin anisotropy. Finally, the model suggests a later and less abrupt collagen engagement after elastase treatment.