Microneedle systems for delivering nucleic acid drugs.

Background: Nucleic acid-based gene therapy is a promising technology that has been used in various applications such as novel vaccination platforms for infectious/cancer diseases and cellular reprogramming because of its fast, specific, and effective properties. Despite its potential, the parenteral nucleic acid drug formulation exhibits instability and low efficacy due to various barriers, such as stability concerns related to its liquid state formulation, skin barriers, and endogenous nuclease degradation. As promising alternatives, many attempts have been made to perform nucleic acid delivery using a microneedle system. With its minimal invasiveness, microneedle can deliver nucleic acid drugs with enhanced efficacy and improved stability. Area covered: This review describes nucleic acid medicines' current state and features and their delivery systems utilizing non-viral vectors and physical delivery systems. In addition, different types of microneedle delivery systems and their properties are briefly reviewed. Furthermore, recent advances of microneedle-based nucleic acid drugs, including featured vaccination applications, are described. Expert opinion: Nucleic acid drugs have shown significant potential beyond the limitation of conventional small molecules, and the current COVID-19 pandemic highlights the importance of nucleic acid therapies as a novel vaccination platform. Microneedle-mediated nucleic acid drug delivery is a potential platform for less invasive nucleic acid drug delivery. Microneedle system can show enhanced efficacy, stability, and improved patient convenience through self-administration with less pain.

Physicochemical characterization of dapagliflozin and its solid-state behavior in stress stability test.

As an active pharmaceutical ingredient, dapagliflozin propanediol monohydrate (D-PD) has been used in the solvated form consisting of dapagliflozin compounded with (S)-propylene glycol and monohydrate at a 1:1:1 ratio. However, dapagliflozin propanediol loses the solvent's reduced lattice structure at slightly higher temperatures. Due to its sensitive solid-state stability, the temperature and humidity are strictly controlled during the production and storage of dapagliflozin. Thus, crystalline molecular complexes containing pharmaceutical salts, solvates, monohydrates, and cocrystals have recently been developed as alternative strategies. This study investigated the dapagliflozin free base (D-FB), D-PD, and dapagliflozin l-proline cocrystals (D-LP). Their solid-state behavior was also evaluated in stress stability studies. The compounds were analyzed using scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier-transform infrared (FT-IR) spectroscopy, dynamic vapor sorption (DVS), and powder rheology testing. In addition, Carr's index, the Hausner ratio, contact angle, and intrinsic dissolution rate were calculated. Dapagliflozin exhibited distinct physical properties depending upon the differences in solid form and also showed significant differences in solid-state behavior in the stress stability test. In conclusion, D-LP was superior to D-FB or D-PD in physicochemical and mechanical properties.

Inhaled bosentan microparticles for the treatment of monocrotaline-induced pulmonary arterial hypertension in rats.

The conventional treatment of pulmonary arterial hypertension (PAH) with oral bosentan hydrate has limitations related to the lack of pulmonary selectivity. In this study, we verified the hypothesis of the feasibility of dry powder inhalation of bosentan as an alternative to oral bosentan hydrate for the treatment of PAH. Inhalable bosentan microparticles with the capability of delivery to the peripheral region of the lungs and enhanced bioavailability have been formulated for PAH. The bosentan microparticles were prepared by the co-spray-drying method with bosentan hydrate and mannitol at different weight ratios. The bosentan microparticles were then characterized for their physicochemical properties, in vitro dissolution behavior, and in vitro aerodynamic performance. The in vivo pharmacokinetics and pathological characteristics were evaluated in a monocrotaline-induced rat model of PAH after intratracheal powder administration of bosentan microparticles, in comparison to orally administered bosentan hydrate. The highest performance bosentan microparticles, named SDBM 1:1, had irregular and porous shape. These microparticles had not only the significantly highest aerosol performance (MMAD of 1.91 µm and FPF of 51.68%) in the formulations, but also significantly increased dissolution rate, compared with the raw bosentan hydrate. This treatment to the lungs was also safe, as evidenced by the cytotoxicity assay. Intratracheally administered SDBM 1:1 elicited a significantly higher Cmax and AUC0-t that were over 10 times higher, compared with those of the raw bosentan hydrate administered orally in the same dose. It also exhibited ameliorative effects on monocrotaline-induced pulmonary arterial remodeling, and right ventricular hypertrophy. The survival rate of the group administrated SDBM1:1 intratracheally was 0.92 at the end of study (Positive control and orally administrated groups were 0.58 and 0.38, respectively). In conclusion, SDBM 1:1 showed promising in vitro and in vivo results with the dry powder inhalation. The inhaled bosentan microparticles can be considered as a potential alternative to oral bosentan hydrate for the treatment of PAH.

Pharmacokinetic Evaluation of a Novel Donepezil-Loaded Dissolving Microneedle Patch in Rats.

Research on the development of dissolving microneedles (DMNs) has focused on bolus drug delivery, with little attention on sustained release. Here, we evaluated the sustained release, absorption pattern, and effective drug permeation of a novel donepezil-loaded DMN patch through an in vivo investigation on rats. The applications of DMN patches to the shaved skin of rats for 1 week and 1 h were compared with oral donepezil administration to assess their sustained release capabilities. We used a validated liquid chromatography-tandem mass spectrometry method to quantify donepezil in the plasma. We found that the microneedle arrays effectively delivered donepezil across the skin, with dissolution observed within 1 h of application. Furthermore, skin irritation test showed that the patches produced no irritation response. The DMN arrays also effectively increased drug permeation and demonstrated sustained release and absorption of donepezil from DMN patches. These patches allow extended dosing intervals, reduced gastrointestinal adverse effects, and convenient self-administration to mitigate poor drug compliance, making them beneficial for the treatment of elderly patients with Alzheimer's disease.

Hot-Melt 3D Extrusion for the Fabrication of Customizable Modified-Release Solid Dosage Forms.

In this work, modified-release solid dosage forms were fabricated by adjusting geometrical properties of solid dosage forms through hot-melt 3D extrusion (3D HME). Using a 3D printer with air pressure driving HME system, solid dosage forms containing ibuprofen (IBF), polyvinyl pyrrolidone (PVP), and polyethylene glycol (PEG) were printed by simultaneous HME and 3D deposition. Printed solid dosage forms were evaluated for their physicochemical properties, dissolution rates, and floatable behavior. Results revealed that IBF content in the solid dosage form could be individualized by adjusting the volume of solid dosage form. IBF was dispersed as amorphous state with enhanced solubility and dissolution rate in a polymer solid dosage form matrix. Due to absence of a disintegrant, sustained release of IBF from printed solid dosage forms was observed in phosphate buffer at pH 6.8. The dissolution rate of IBF was dependent on geometric properties of the solid dosage form. The dissolution rate of IBF could be modified by merging two different geometries into one solid dosage form. In this study, the 3D HME process showed high reproducibility and accuracy for preparing dosage forms. API dosage and release profile were found to be customizable by modifying or combining 3D modeling.

Swellable and porous bilayer tablet for gastroretentive drug delivery: Preparation and in vitro-in vivo evaluation.

The purpose of this study was to develop a novel gastroretentive drug delivery system with immediate buoyancy and high wet strength. The proposed bilayer tablet was composed of a drug layer and a highly porous and swellable gastroretentive (GR) layer. The highly porous GR layer was prepared by sublimating the volatile materials after compaction with swellable polymers. This pore-forming process decreased the density of the GR layer and enabled the tablet to float immediately on the dissolution media. The GR layer formulation was optimized by comparing the swelling, erosion, and mechanical properties of candidate swellable polymers. The release rates were conveniently controlled by changing the polymer content in the drug layer, while the swelling and floating properties were provided by the GR layer. The application of percolation theory revealed that the polymer content above the estimated threshold was required for a reliable drug release profile. In vivo study in fed beagle dogs confirmed the enhanced gastric retention time of the tablets compared to that of conventional single layer tablets. Taken together, our data suggest that the proposed system can be a promising platform technology with superior GR properties and a convenient formulation process.

Physicochemical properties and drug-release mechanisms of dual-release bilayer tablet containing mirabegron and fesoterodine fumarate.

Introduction: In this study, a dual release bi-layer tablet containing Fesoterodine fumarate (Fst) 5 mg and Mirabegron (Mrb) 50 mg was prepared to investigate the different release behavior of each drug in bilayer tablet. The bilayer tablet was prepared based on monolayer-tablet formulation of each drug. Methods: The optimized bi-layer tablet showed an in vitro dissolution profile similar to commercial reference tablets Toviaz and Betmiga, based on a satisfactory similarity factor. Drug-release kinetics of each drug in the bilayer tablet were evaluated based on dissolution profiles. Drug-release behavior was evaluated by observing the surface of each layer by scanning electron microscopy and measuring the changes in weight and volume of the tablet during dissolution. Drug transfer between each layer was also investigated by Fourier -transform infrared spectroscopic imaging by observing the cross-section of the bilayer tablet cut vertically during dissolution. Results: The release of Fst was well suited for the Higuchi model, and the release of Mrb was well suited for the Hixson-crowell model. Compared with dissolution rate of each monolayer tablet, that of Fst in the bilayer tablet was slightly reduced (5%), but the dissolution rate of Mrb in bilayer tablet was dramatically decreased (20%). Also, a drug-release study confirmed that polymer swelling was dominant in Fst layer compared with polymer erosion, and degradation was dominant in MRB layer. Fourier-transform infrared imaging and 3-D image reconstruction showed that drug transfer in the bilayer tablet correlates with the results of drug-release behavior. Conclusion: These findings are expected to provide scientific insights in the development of a dual-release bilayer drug-delivery system for Fst and Mrb.

Preparation, Characterization, and Stability Evaluation of Taste-Masking Lacosamide Microparticles.

Lacosamide (LCM) is a third-generation antiepileptic drug. Selective action of the drug on voltage-gated sodium channels reduces side effects. Oral administration of LCM shows good pharmacokinetic profile. However, the bitter taste of LCM is a barrier to the development of oral formulations. In this study, we aimed to prepare encapsulated LCM microparticles (MPs) for masking its bitter taste. Encapsulated LCM MPs were prepared with Eudragit® E100 (E100), a pH-dependent polymer, by spray drying. Three formulations comprising different ratios of LCM and E100 (3:1, 1:1, and 1:3) were prepared. Physicochemical tests showed that LCM was in an amorphous state in the prepared formulations, and they were not miscible. LCM-E100 (1:3) had a rough surface due to surface enrichment of LCM. Increased E100 ratio in LCM-E100 MPs resulted in better taste-making effectiveness: LCM-E100 (1:1) and LCM-E100 (1:3) showed good taste-masking effectiveness, while LCM-E100 (3:1) could not mask the bitter taste of LCM. Dissolution results of the prepared formulations showed good correlation with taste-masking effectiveness. Nevertheless, high E100 ratio reduced the stability of the prepared formulations. Especially the difference in initial dissolution profile observed for LCM-E100 (1:3) indicated rapid reduction in taste-masking effectiveness and surface recrystallization. Therefore, LCM-E100 formulation in the ratio of 1:1 was selected as the best formulation with good taste-masking effectiveness and stability.

Formulation and evaluation of carrier-free dry powder inhaler containing sildenafil.

Pulmonary delivery of sildenafil for the treatment of pulmonary arterial hypertension could overcome the limitations of intravenous and oral administration routes, such as poor patient compliance and systemic side effects. In this study, a carrier-free dry powder inhaler (DPI) formulation was developed, using spray drying technique and L-leucine as a dispersibility enhancer. Sildenafil citrate salt and sildenafil free base were evaluated for drug transport using a Calu-3 cell model, and their suitability for DPI production by spray drying was tested. Characteristics of the resultant carrier-free DPI powders were examined, namely crystallinity, morphology, size distribution, density, zeta potential, and aerodynamic performance. A Box-Behnken design was adopted to optimize the formulation and process conditions, including leucine amount, fraction of methanol in spraying solvent, and inlet temperature. While both sildenafil forms exhibited sufficient permeability for lung absorption, only sildenafil base resulted in DPI powders which were stable for 6 months. The introduction of leucine into the formulations effectively enhanced aerodynamic performance of the powders and particles with favorable size, shape, and density were produced. The optimal DPI formulation determined from experimental design possesses excellent aerodynamic performance with 89.39% emitted dose and 80.08% fine particle fraction, indicating the possibility of incorporating sildenafil into carrier-free DPIs for pulmonary delivery.

The role of lactose carrier on the powder behavior and aerodynamic performance of bosentan microparticles for dry powder inhalation.

In this study, we prepared carrier-based formulations for dry powder inhalers by mixing bosentan microparticles with carrier, prepared in three separate types of lactose. Spray-dried, milled and sieved lactose resulted in formulations with various shapes, surface morphology and particle size distributions. In the spray-dried lactose, the micronized bosentan particles were trapped and strongly interlocked in the rugged surface of spray-dried lactose, whereas in the milled and sieved lactose they exhibited lower binding affinity onto the smooth surface of carrier. In all of the carrier-based formulations, the flow properties were improved compared with bosentan microparticles alone, in the following order spray-dried, sieved and milled lactose. The aerodynamic characteristics of each were evaluated by particle image velocimetry and Andersen cascade impactor™. Depending on the lactose carrier type, particle dispersion showed different flow characteristics. In the spray-dried lactose, the formulation was dispersed fast in the only frontal direction, while the milled and sieved lactose formulations formed a relatively slower S-shaped and fountain-shaped flow stream, respectively. In addition, milled and sieved lactose formulations showed that the drug particles were readily liberated from the lactose carrier, and demonstrated significantly higher aerosol performance than spray-dried lactose.

Formulation and in vitro/in vivo evaluation of chitosan-based film forming gel containing ketoprofen.

The film forming gel, adhered to skin surfaces upon application and formed a film, has an advantage onto skin to provide protection and continuous drug release to the application site. This study aimed to prepare a chitosan-based film forming gel containing ketoprofen (CbFG) and to evaluate the CbFG and film from CbFG (CbFG-film). CbFG were prepared with chitosan, lactic acid and various skin permeation enhancers. The physicochemical characteristics were evaluated by texture analysis, viscometry, SEM, DSC, XRD and FT-IR. To identify the mechanism of skin permeation, in vitro skin permeation study was conducted with a Franz diffusion cell and excised SD-rat and hairless mouse dorsal skin. In vivo efficacy assessment in mono-iodoacetate (MIA)-induced rheumatoid arthritis animal model was also conducted. CbFG was successfully prepared and, after applying CbFG to the excised rat dorsal skin, the CbFG-film was also formed well. The physicochemical characteristics of CbFG and CbFG-film could be explained by the grafting of oleic acid onto chitosan in the absence of catalysts. In addition, CbFG containing oleic acid had a higher skin permeation rate in comparison with any other candidate enhancers. The in vivo efficacy study also confirmed significant anti-inflammatory and analgesic effects. Consequently, we report the successful preparation of chitosan-based film forming gel containing ketoprofen with excellent mechanical properties, skin permeation and anti-inflammatory and analgesic effects.

Application of continuous twin screw granulation for the metformin hydrochloride extended release formulation.

This study focuses on evaluating the potential of transferring from a batch process to continuous process for manufacturing of the extended release formulation. Metformin hydrochloride (HCl) was used in the model formulation which was intended to contain the high amount of hydrophilic drug. The effects of barrel temperature, binder type, powder feed rate, and screw speed on granule properties (size and strength) and torque value in twin screw granulation were investigated. Due to the high content of hydrophilic model drug, the granules prepared at a higher temperature with HPMC binding solution had the narrower size distribution and greater strength than the granules prepared with distilled water as a binding solution. After continuous drying and milling steps, the granules (continuous process) satisfied the fundamental purpose of granulation with size and flowability, despite different shape compared with the granules (batch process). Furthermore, there were no significant differences between two granulation processes in tablet properties, such as tablet hardness and in vitro release. The considerations and strategies used in this study to transfer from a batch to continuous process can be applied to other existing formulations based on high shear granulation to enable rapid process transfer in the pharmaceutical industry.

Implementation of Quality by Design for Formulation of Rebamipide Gastro-retentive Tablet.

The purpose of the present study was to develop a rebamipide (RBM) gastro-retentive (GR) tablet by implementing quality by design (QbD). RBM GR tablets were prepared using a sublimation method. Quality target product profile (QTPP) and critical quality attributes (CQAs) of the RBM GR tablets were defined according to the preliminary studies. Factors affecting the CQAs were prioritized using failure mode and effects analysis (FMEA). Design space and optimum formulation were established through a mixture design. The validity of the design space was confirmed using runs within the area. The QTPP of the RBM GR tablets was the orally administered GR tablet containing 300 mg of RBM taken once daily. Based on the QTPP, dissolution rate, tablet friability, and floating property were chosen as CQAs. According to the risk assessment, the amount of sustained-release agent, sublimating material, and diluent showed high-risk priority number (RPN) values above 40. Based on the RPN, these factors were further investigated using mixture design methodology. Design space of formulations was depicted as an overlaid contour plot and the optimum formulation to satisfy the desired responses was obtained by determining the expected value of each response. The similarity factor (f2) of the release profile between predicted response and experimental response was 89.463, suggesting that two release profiles are similar. The validity of the design space was also confirmed. Consequently, we were able to develop the RBM GR tablets by implementing the QbD concept. These results provide useful information for development of tablet formulations using the QbD.

Release kinetics of highly porous floating tablets containing cilostazol.

This study focuses on developing a highly porous floating tablet containing cilostazol. The underlying release mechanism of cilostazol from porous and floating tablets in dissolution media containing surfactants was investigated. The tablets were prepared by compressing granules and excipients with a sublimating agent, followed by sublimation under vacuum. The volatile material for the sublimating agent was chosen based on its flow properties using conventional methods as well as the twisted blade method. Resultant tablets could float immediately and had significantly higher tensile strengths than conventional tablets of similar porosities, holding a promising potential for increasing gastroretentive properties. Fitting the release profiles to the Korsmeyer-Peppas equation indicated Super Case II, Case II and non-Fickian kinetics, which implied that the release was affected by both floating behavior and matrix erosion. Abrupt changes in release kinetic parameters and erosional behaviors were found between the tablets containing different amounts of HPMC, indicating the existence of an excipient percolation threshold. Neither the surfactant in the media nor the porosity affected the dominant release mechanism, which was matrix erosion. Understanding the dominant release mechanism and percolation threshold allows for tuning the formulation to obtain various release profiles.

Preparation and physicochemical characterization of spray-dried and jet-milled microparticles containing bosentan hydrate for dry powder inhalation aerosols.

The objectives of this study were to prepare bosentan hydrate (BST) microparticles as dry powder inhalations (DPIs) via spray drying and jet milling under various parameters, to comprehensively characterize the physicochemical properties of the BST hydrate microparticles, and to evaluate the aerosol dispersion performance and dissolution behavior as DPIs. The BST microparticles were successfully prepared for DPIs by spray drying from feeding solution concentrations of 1%, 3%, and 5% (w/v) and by jet milling at grinding pressures of 2, 3, and 4 MPa. The physicochemical properties of the spray-dried (SD) and jet-milled (JM) microparticles were determined via scanning electron microscopy, atomic force microscopy, dynamic light scattering particle size analysis, Karl Fischer titration, surface analysis, pycnometry, differential scanning calorimetry, powder X-ray diffraction, and Fourier transform infrared spectroscopy. The in vitro aerosol dispersion performance and drug dissolution behavior were evaluated using an Anderson cascade impactor and a Franz diffusion cell, respectively. The JM microparticles exhibited an irregular corrugated surface and a crystalline solid state, while the SD microparticles were spherical with a smooth surface and an amorphous solid state. Thus, the in vitro aerosol dispersion performance and dissolution behavior as DPIs were considerably different due to the differences in the physicochemical properties of the SD and JM microparticles. In particular, the highest grinding pressures under jet milling exhibited excellent aerosol dispersion performance with statistically higher values of 56.8%±2.0% of respirable fraction and 33.8%±2.3% of fine particle fraction and lower mass median aerodynamic diameter of 5.0±0.3 µm than the others (P<0.05, analysis of variance/Tukey). The drug dissolution mechanism was also affected by the physicochemical properties that determine the dissolution kinetics of the SD and JM microparticles, which were well fitted into the Higuchi and zero-order models, respectively.

Formulation and in Vitro Evaluation of Self-microemulsifying Drug Delivery System Containing Fixed-Dose Combination of Atorvastatin and Ezetimibe.

This paper focuses on the development and physicochemical characterization of a self-microemulsifying drug delivery system (SMEDDS) containing a fixed-dose combination of atorvastatin (ATR) and ezetimibe (EZT). The solubility of both drugs was determined in excipient screening studies. Ternary-phase diagrams were drawn for 27 systems composed of different surfactants, cosurfactants, and oils at different surfactant-to-cosurfactant (S/CoS) ratios, and the system exhibiting the largest percentage area of the self-microemulsifying region was selected. The optimum oil ratio in the SMEDDS was selected by evaluating the mean droplet size of the resultant microemulsions. The underlying mechanism of the lower ATR loading capacity compared with EZT was elucidated by measurement of the zeta potential and UV absorption analysis. The results implied that ATR was located exclusively in the surfactant-cosurfactant layer, whereas EZT was located both in the microemulsion core and the surfactant-cosurfactant layer. In vitro dissolution studies showed that the SMEDDS had higher initial dissolution rates for both drugs when compared with marketed products. More importantly, EZT had a significantly increased dissolution profile in distilled water and pH 4.0 acetate buffer, implying enhanced bioavailability.

Design and in vivo evaluation of oxycodone once-a-day controlled-release tablets.

The aim of present study was to design oxycodone once-a-day controlled-release (CR) tablets and to perform in vitro/in vivo characterizations. Release profiles to achieve desired plasma concentration versus time curves were established by using simulation software and reported pharmacokinetic parameters of the drug. Hydroxypropyl methylcellulose (HPMC) 100,000 mPa·s was used as a release modifier because the polymer was found to be resistant to changes in conditions of the release study, including rotation speed of paddle and ion strength. The burst release of the drug from the CR tablets could be suppressed by applying an additional HPMC layer as a physical barrier. Finally, the oxycodone once-a-day tablet was comprised of two layers, an inert HPMC layer and a CR layer containing drug and HPMC. Commercial products, either 10 mg bis in die (bid [twice a day]) or once-a-day CR tablets (20 mg) were administered to healthy volunteers, and calculated pharmacokinetic parameters indicated bioequivalence of the two different treatments. The findings of the present study emphasize the potential of oxycodone once-a-day CR tablets for improved patient compliance, safety, and efficacy, which could help researchers to develop new CR dosage forms of oxycodone.

Organic-aqueous crossover coating process for the desmopressin orally disintegrating microparticles.

The purpose of the present study was to prepare desmopressin orally disintegrating microparticles (ODMs) using organic-aqueous crossover coating process which featured an organic sub-coating followed by an aqueous active coating. Sucrose beads and hydroxypropyl cellulose (HPC) were used as inert cores and a coating material, respectively. Characterizations including size distribution analysis, in-vitro release studies and in-vitro disintegration studies were performed. A pharmacokinetic study of the ODMs was also conducted in eight beagle dogs. It was found that sucrose beads should be coated using organic solvents to preserve their original morphology. For the active coating, the aqueous coating solution should be used for drug stability. When sucrose beads were coated using organic-aqueous crossover coating process, double-layer ODMs with round shapes were produced with detectable impurities below limit of US Pharmacopeia. The median size of ODMs was 195.6 µm, which was considered small enough for a good mouthfeel. The ODMs dissolved in artificial saliva within 15 s because of hydrophilic materials including sucrose and HPC in the ODMs. Because of its fast-dissolving properties, 100% release of the drug was reached within 5 min. Pharmacokinetic parameters including Cmax and AUC24 indicated bioequivalence of the ODMs and the conventional immediate release tablets. Therefore, by using the organic-aqueous crossover coating process, double-layer ODMs were successively prepared with small size, round shapes and good drug stability.

Preparation of sildenafil citrate microcapsules and in vitro/in vivo evaluation of taste masking efficiency.

The aim of the present study was to prepare the particulate taste-masking system to mask the bitter taste of sildenafil citrate (SC), a well-known phosphodiesterase-5 inhibitor used for erectile dysfunction (ED) and pulmonary artery hypertension (PAH). It was evaluated for the taste masking efficiency by the in vitro measurement using electronic tongue (e-tongue) system and the in vivo human panel sensory test. Microcapsules were prepared by microencapsulation with a gastro-soluble polymer, Eudragit(®) E100 (E100), using a spray drying technique at four different weight ratios (2:1, 1:1, 1:2, and 1:3). Characters of prepared microcapsules and the effect of polymer ratio on the taste masking were investigated. The particle morphology and the distribution of SC in microcapsules were observed by SEM-EDS and physical properties were evaluated by PXRD, Raman spectroscopy, and DSC. By drug dissolution studies at pH 1.2 buffer and DW, it was found that E100 was not able to alter the drug release in stomach. As the result of taste evaluation studies, there were a good correlation (R(2)=0.9867) between the weight ratio of polymer and the taste masking efficiency expressed in the distances on the PCA map of the e-tongue data, and a relevance of the e-tongue measurement with the result of sensory test.

Preparation and evaluation of dual-mode floating gastroretentive tablets containing itraconazole.

The aims of the present study were to prepare new dual-mode floating gastroretentive tablets (DF-GRT) containing itraconazole (ITR) and to evaluate influence of the dosage forms on pharmacokinetic parameters of ITR. The solubility of ITR was enhanced around 200 times (from 1.54 to 248.38 µg/mL) by preparing solid dispersion (SD) with hydroxypropylmethyl cellulose. Buoyancy of DF-GRT containing ITR-SD was established by both camphor sublimation and gas generation. Camphor sublimation decreased density of DF-GRT by making pores in tablet matrix, which led to elimination of lag time for floating. Carbon dioxide generated by sodium bicarbonate and citric acid helped to maintain buoyancy of DF-GRT. Therefore DF-GRT floated on the medium without lag time until disintegrated entirely during in vitro release study. They released 89.11% of the drug at 2 h. Residual camphor was <0.5 wt% after sublimation. The pharmacokinetics of DF-GRT was evaluated in six miniature pigs and compared to immediate release tablets (IRT). Mean AUC ratio of GRT/IRT was 1.36 but there was no statistical difference between AUC values. However delayed tmax, increased MRT and equivalent Cmax of DF-GRT supposed it could be a promising tool for gastroretentive drug delivery system containing ITR.