Vertical variation of PM2.5 mass and chemical composition, particle size distribution, NO2, and BTEX at a high rise building.

Substantial efforts have been made in recent years to investigate the horizontal variability of air pollutants at regional and urban scales and epidemiological studies have taken advantage of resulting improvements in exposure assessment. On the contrary, only a few studies have investigated the vertical variability and their results are not consistent. In this study, a field experiment has been conducted to evaluate the variation of concentrations of different particle metrics and gaseous pollutants on the basis of floor height at a high rise building. Two 15-day monitoring campaigns were conducted in the urban area of Bologna, Northern Italy, one of the most polluted areas in Europe. Measurements sites were operated simultaneously at 2, 15, 26, 44 and 65 m a.g.l. Several particulate matter metrics including PM2.5 mass and chemical composition, particle number concentration and size distribution were measured. Time integrated measurement of NO2 and BTEX were also included in the monitoring campaigns. Measurements showed relevant vertical gradients for most traffic related pollutants. A monotonic gradient of PM2.5 was found with ground-to-top differences of 4% during the warm period and 11% during the cold period. Larger gradients were found for UFP (∼30% during both seasons) with a substantial loss of particles from ground to top in the sub-50 nm size range. The largest drops in concentrations for chemical components were found for Elemental Carbon (-27%), iron (-11%) and tin (-36%) during winter. The ground-to-top decline of concentrations for NO2 and benzene during winter was equal to 74% and 35%, respectively. In conclusion, our findings emphasize the need to include vertical variations of urban air pollutants when evaluating population exposure and associated health effects, especially in relation to some traffic related pollutants and particle metrics.

Is particulate air pollution at the front door a good proxy of residential exposure?

The most advanced epidemiological studies on health effects of air pollution assign exposure to individuals based on residential outdoor concentrations of air pollutants measured or estimated at the front-door. In order to assess to what extent this approach could cause misclassification, indoor measurements were carried out in unoccupied rooms at the front and back of a building which fronted onto a major urban road. Simultaneous measurements were also carried out at adjacent outdoor locations to the front and rear of the building. Two 15-day monitoring campaigns were conducted in the period June-December 2013 in a building located in the urban area of Bologna, Italy. Particulate matter metrics including PM2.5 mass and chemical composition, particle number concentration and size distribution were measured. Both outdoor and indoor concentrations at the front of the building substantially exceeded those at the rear. The highest front/back ratio was found for ultrafine particles with outdoor concentration at the front door 3.4 times higher than at the rear. A weak influence on front/back ratios was found for wind direction. Particle size distribution showed a substantial loss of particles within the sub-50 nm size range between the front and rear of the building and a further loss of this size range in the indoor data. The chemical speciation data showed relevant reductions for most constituents between the front and the rear, especially for traffic related elements such as Elemental Carbon, Iron, Manganese and Tin. The main conclusion of the study is that gradients in concentrations between the front and rear, both outside and inside the building, are relevant and comparable to those measured between buildings located in high and low traffic areas. These findings show high potential for misclassification in the epidemiological studies that assign exposure based on particle concentrations estimated or measured at subjects' home addresses.

Characteristics and major sources of carbonaceous aerosols in PM2.5 in Emilia Romagna Region (Northern Italy) from four-year observations.

The concentrations of organic and elemental carbon in PM2.5 aerosol samples were measured in two sites of Emilia Romagna (Po Valley, Northern Italy) in eight campaigns during different seasons from 2011 to 2014. Strong seasonality was observed with the highest OC concentrations during the cold periods (≈ 5.5 µg m(-3)) and the lowest in the warm months (≈ 2.7 µg m(-3)) as well as with higher EC levels in fall/winter (≈ 1.4 µg m(-3)) in comparison with spring/summer (≈ 0.6 µg m(-3)). Concerning spatial variability, there were no statistically significant difference (p<0.05) between OC concentrations at the two sampling sites in each campaign, while the EC values were nearly twofold higher levels at the urban site than those at the rural one. Specific molecular markers were investigated to attempt the basic apportionment of OC by discriminating between the main emission sources of primary OC, such as fossil fuels burning - including traffic vehicle emission - residential wood burning, and bio-aerosol released from plants and microorganisms, and the atmospheric photo-oxidation processes generating OCsec. The investigated markers were low-molecular-weight carboxylic acids - to describe the contribution of secondary organic aerosol - anhydrosugars - to quantify primary emissions from biomass burning - bio-sugars - to qualitatively estimate biogenic sources - and Polycyclic Aromatic Hydrocarbons - to differentiate among different combustion emissions. Using the levoglucosan tracer method, contribution of wood smoke to atmospheric OC concentration was computed. Wood burning accounts for 33% of OC in fall/winter and for 3% in spring/summer. A clear seasonal trend is also observed for the impact of secondary processes with higher contribution in the warm seasons (≈ 63%) in comparison with that in colder months (≈ 33%), that is consistent with enhanced solar radiation in spring/summer.

Short-term effects of particulate matter constituents on daily hospitalizations and mortality in five South-European cities: results from the MED-PARTICLES project.

BACKGROUND: Few recent studies examined acute effects on health of individual chemical species in the particulate matter (PM) mixture, and most of them have been conducted in North America. Studies in Southern Europe are scarce. The aim of this study is to examine the relationship between particulate matter constituents and daily hospital admissions and mortality in five cities in Southern Europe. METHODS: The study included five cities in Southern Europe, three cities in Spain: Barcelona (2003-2010), Madrid (2007-2008) and Huelva (2003-2010); and two cities in Italy: Rome (2005-2007) and Bologna (2011-2013). A case-crossover design was used to link cardiovascular and respiratory hospital admissions and total, cardiovascular and respiratory mortality with a pre-defined list of 16 PM10 and PM2.5 constituents. Lags 0 to 2 were examined. City-specific results were combined by random-effects meta-analysis. RESULTS: Most of the elements studied, namely EC, SO4(2-), SiO2, Ca, Fe, Zn, Cu, Ti, Mn, V and Ni, showed increased percent changes in cardiovascular and/or respiratory hospitalizations, mainly at lags 0 and 1. The percent increase by one interquartile range (IQR) change ranged from 0.69% to 3.29%. After adjustment for total PM levels, only associations for Mn, Zn and Ni remained significant. For mortality, although positive associations were identified (Fe and Ti for total mortality; EC and Mg for cardiovascular mortality; and NO3(-) for respiratory mortality) the patterns were less clear. CONCLUSIONS: The associations found in this study reflect that several PM constituents, originating from different sources, may drive previously reported results between PM and hospital admissions in the Mediterranean area.

Ultrafine particle concentrations in the surroundings of an urban area: comparing downwind to upwind conditions using Generalized Additive Models (GAMs).

The aim of this study was to investigate the influence of an urban area on ultrafine particle (UFP) concentration in nearby surrounding areas. We assessed how downwind and upwind conditions affect the UFP concentration at a site placed a few kilometres from the city border. Secondarily, we investigated the relationship among other meteorological factors, temporal variables and UFP. Data were collected for 44 days during 2008 and 2009 at a rural site placed about 3 kilometres from Bologna, in northern Italy. Measurements were performed using a spectrometer (FMPS TSI 3091). The average UFP number concentration was 11 776 (±7836) particles per cm(3). We analysed the effect of wind direction in a multivariate Generalized Additive Model (GAM) adjusted for the principal meteorological parameters and temporal trends. An increase of about 25% in UFP levels was observed when the site was downwind of the urban area, compared with the levels observed when wind blew from rural areas. The size distribution of particles was also affected by the wind direction, showing higher concentration of small size particles when the wind blew from the urban area. The GAM showed a good fit to the data (R(2) = 0.81). Model choice was via Akaike Information Criteria (AIC). The analysis also revealed that an approach based on meteorological data plus temporal trends improved the goodness of the fit of the model. In addition, the findings contribute to evidence on effects of exposure to ultrafine particles on a population living in city surroundings.