Ni2P active site ensembles tune electrocatalytic nitrate reduction selectivity.

We demonstrate that active site ensembles on transition metal phosphides tune the selectivity of the nitrate reduction reaction. Using Ni2P nanocrystals as a case study, we report a mechanism involving competitive co-adsorption of H* and NOx* intermediates. A near 100% faradaic efficiency for nitrate reduction over hydrogen evolution is observed at -0.4 V, while NH3 selectivity is maximized at -0.2 V vs. RHE.

Phosphonate-based iron complex for a cost-effective and long cycling aqueous iron redox flow battery.

A promising metal-organic complex, iron (Fe)-NTMPA2, consisting of Fe(III) chloride and nitrilotri-(methylphosphonic acid) (NTMPA), is designed for use in aqueous iron redox flow batteries. A full-cell testing, where a concentrated Fe-NTMPA2 anolyte (0.67 M) is paired with a Fe-CN catholyte, demonstrates exceptional cycling stability over 1000 charge/discharge cycles, and noteworthy performances, including 96% capacity utilization, a minimal capacity fade rate of 0.0013% per cycle (1.3% over 1,000 cycles), high Coulombic efficiency and energy efficiency near 100% and 87%, respectively, all achieved under a current density of 20 mA·cm-². Furthermore, density functional theory unveils two potential coordination structures for Fe-NTMPA2 complexes, improving the understanding between the ligand coordination environment and electron transfer kinetics. When paired with a high redox potential Fe-Dcbpy/CN catholyte, 2,2'-bipyridine-4,4'-dicarboxylic (Dcbpy) acid and cyanide (CN) ligands, Fe-NTMPA2 demonstrates a notably elevated cell voltage of 1 V, enabling a practical energy density of up to 9 Wh/L.

Leveraging Curvature on N-Doped Carbon Materials for Hydrogen Storage.

Carbon sorbent materials have shown great promise for solid-state hydrogen (H2) storage. Modification of these materials with nitrogen (N) dopants has been undertaken to develop materials that can store H2 at ambient temperatures. In this work density functional theory (DFT) calculations are used to systematically probe the influence of curvature on the stability and activity of undoped and N-doped carbon materials toward H binding. Specifically, four models of carbon materials are used: graphene, [5,5] carbon nanotube, [5,5] D5d-C120, and C60, to extract and correlate the thermodynamic properties of active sites with varying degrees of sp2 hybridization (curvature). From the calculations and analysis, it is found that graphitic N-doping is thermodynamically favored on more pyramidal sites with increased curvature. In contrast, it is found that the hydrogen binding energy is weakly affected by curvature and is dominated by electronic effects induced by N-doping. These findings highlight the importance of modulating the heteroatom doping configuration and the lattice topology when developing materials for H2 storage.

Understanding and tackling the activity and selectivity issues for methane to methanol using single atom alloys.

The process for the direct oxidation of methane to methanol is investigated on single atom alloys using density functional theory. A catalyst search is performed across FCC metal single atom alloys. 7 single atom alloys are found as candidates and microkinetic modelling is performed. The activity and selectivity are remarkably improved over that of pure palladium metal, yet remain unideal.

Multilevel Computational Studies Reveal the Importance of Axial Ligand for Oxygen Reduction Reaction on Fe-N-C Materials.

The systematic improvement of Fe-N-C materials for fuel cell applications has proven challenging, due in part to an incomplete atomistic understanding of the oxygen reduction reaction (ORR) under electrochemical conditions. Herein, a multilevel computational approach, which combines ab initio molecular dynamics simulations and constant potential density functional theory calculations, is used to assess proton-coupled electron transfer (PCET) processes and adsorption thermodynamics of key ORR intermediates. These calculations indicate that the potential-limiting step for ORR on Fe-N-C materials is the formation of the FeIII-OOH intermediate. They also show that an active site model with a water molecule axially ligated to the iron center throughout the catalytic cycle produces results that are consistent with the experimental measurements. In particular, reliable prediction of the ORR onset potential and the Fe(III/II) redox potential associated with the conversion of FeIII-OH to FeII and desorbed H2O requires an axial H2O co-adsorbed to the iron center. The observation of a five-coordinate rather than four-coordinate active site has significant implications for the thermodynamics and mechanism of ORR. These findings highlight the importance of solvent-substrate interactions and surface charge effects for understanding the PCET reaction mechanisms and transition-metal redox couples under realistic electrochemical conditions.

Hydrogen Coupling on Platinum Using Artificial Neural Network Potentials and DFT.

To date, the understanding of reactions at solid-liquid interfaces has proven challenging, mainly because of the inaccessible nature of such systems to current experimental techniques with atomic resolution. This has meant that many important features, including free energy barriers and the atomistic structure of intermediates, remain unknown. To tackle these issues, we construct and utilize a high-dimensional neural network (HDNN) potential for the simulation of hydrogen evolution at the HCl(aq)/Pt(111) interface, taking into consideration the influence of adsorbate-adsorbate, adsorbate-solvent interactions, and ion solvation explicitly. Long time scale MD simulations reveal coadsorbed Had/H2Oad on the surface. The free energy profiles for the Tafel and Heyrovsky type hydrogen coupling are extracted using umbrella sampling. It is found that the preferential mechanism can change depending on the surface coverage, highlighting the dual mechanistic nature for HER on Pt(111). Our work demonstrates the importance of controlling the solvent-substrate interactions in developing catalysts beyond Pt.

Investigating the innate selectivity issues of methane to methanol: consideration of an aqueous environment.

The higher reactivity of the methanol product over the methane reactant for the direct oxidation of methane to methanol is explored. C-H activation, C-O coupling, and C-OH coupling are investigated as key steps in the selective oxidation of methane using DFT. These elementary steps are initially considered in the gas phase for a variety of fcc (111) pristine metal surfaces. Methanol is found to be consistently more reactive for both C-H activation and subsequent oxidation steps. With an aqueous environment being understood experimentally to have a profound effect on the selectivity of this process, these steps are also considered in the aqueous phase by ab initio molecular dynamics calculations. The water solvent is modelled explicity, with each water molecule given the same level of theory as the metal surface and surface species. Free energy profiles for these steps are generated by umbrella sampling. It is found that an aqueous environment has a considerable effect on the kinetics of the elementary steps yet has little effect on the methane/methanol selectivity-conversion limit. Despite this, we find that the aqueous phase promotes the C-OH pathway for methanol formation, which could enhance the selectivity for methanol formation over that of other oxygenates.

Understanding supported noble metal catalysts using first-principles calculations.

Heterogeneous catalysis on supported and nonsupported nanoparticles is of fundamental importance in the energy and chemical conversion industries. Rather than laboratory analysis, first-principles calculations give us an atomic-level understanding of the structure and reactivity of nanoparticles and supports, greatly reducing the efforts of screening and design. However, unlike catalysis on low index single crystalline surfaces, nanoparticle catalysis relies on the tandem properties of a support material as well as the metal cluster itself, often with charge transfer processes being of key importance. In this perspective, we examine current state-of-the-art quantum-chemical research for the modeling of reactions that utilize small transition metal clusters on metal oxide supports. This should provide readers with useful insights when dealing with chemical reactions on such systems, before discussing the possibilities and challenges in the field.

Interconversion of hydrated protons at the interface between liquid water and platinum.

Hydrogen transfer is the fundamental step in electrochemistry involved in water splitting and the hydrogen evolution reaction (HER). However, the nature of this process at the solid-liquid interface has been little studied at the atomic level. In this work, we use ab initio molecular dynamics (AIMD) and umbrella sampling (US), giving us an accurate description of the dynamic processes associated with the solid-liquid environment. Based on this method, the free energy barriers were calculated at the H2O/Pt(111) interface, and a multistep mechanism has been proposed. We find that proton transfer is dictated by the strength of the solid-liquid interaction and the configuration of water molecules above the reaction site. In particular, we show that the surface adsorbed cations, which are confined to the interface above the top site position, act as vessels for enhanced hydrogen transfer to and from the surface. Our results could lead to significant mechanistic consequences for the HER, water splitting and solid-liquid reactions in general.